IR Cure System With Dual Voltage Gun

    Item #10190 Brand: Eastwood

    3 Review(s)
    No additional discounts apply.


    Powder-coat with our Dual-Voltage HotCoat Starter Kit, then cure it with our Infrared Curing Lamp System...all in one huge kit! With our Dual-Voltage HotCoat Gun, you can powder-coat interiors and hard-to-reach corners using the low 15,000-volt setting, or switch to the high 25,000-volt setting for multi-coat coverage over larger areas with increased powder adhesion and minimal overspray. Our Infrared Powder-Coat Cure System will cure parts as small as bolts and brackets or as large as rear housings. Lamp reflector measures 10" x 8", and can cure a 10" x 10" area at one time; simply move along the piece until complete.
    • Extremely durable finish
    • Coat and cure in under an hour
    • Easy to apply
    • Infrared lamp and stand set-up in minutes
    • Use in shop or garage for small parts to large housings

    About IR Cure System With Dual Voltage Gun

    Why powder coat? Because it gives you one of the most economical, color-durable, and longest-lasting finishes available. You'll find powder-coated surfaces are far more resistant to chipping, scratches, fading, and wear than other finishes, and the color selection is virtually unlimited, with high and low gloss, metallic, and clear finishes available. And thanks to the UV resistance of many of the powders, colors stay bright and vibrant longer. Texture selections range from smooth surfaces to a wrinkled or matte finish, plus rough textures designed for hiding surface imperfections.

    Light housing measures 12.25" wide x 9.5" high x 6" deep. Lamp can be tilted 45 degrees up or down. 10" arm connects the light to the stand and can be locked in any position on the stand from 1' to 6' above the floor. Unit is rated at 1800 watts, and requires a 120vAC 15-amp circuit.


    11698 Dual-Voltage HotCoat Powder Coating Kit (includes: 11676 Eastwood Dual-Voltage HotCoat Gun, 1/2-lb. Black Gloss Powder, 51558 Powder Chip Color Chart, 10078 Reusable Hi-Temp Silicone Plugs, 10027 Hi-Temp Masking Tape [1/2" x 36-yard roll], 43045 1-lb. Stainless Steel Hanging Wire, 34128 Fluidizing Attachment, 34066 In-Line Air Filter, 10128 Performance Deflector, 3 Empty Powder Bottles with Screw-On Tops)
    10170 10" x 10" Infrared Curing Lamp
    10171 6' Metal Stand
    Instructions with Cure Charts


    10170 Replacement Lamp Head


    (Q) How often should the lamp be moved over the workpiece?
    (A) Refer to the included instruction booklet's cure charts to determine how frequently the light should be moved.

    (Q) What are some other tips?
    (A) Long parts are best cured by hanging vertically, working from the bottom up. An entire part should be powder-coated before the curing process begins. If the part has seams it can be coated and cured in sections.


    Do not focus the light on combustible materials. Do not operate the light unless it is securely attached to the supplied stand.

    Customers also viewed:

    Customer Reviews

    3 Item(s)

    per page
    Excellent Customer Service (Posted on 1/12/14)
    Review by Frank
    My IR cure system arrived on a Saturday evening. I was disappointed to see one of the elements on the lamp had been broken during shipping. I emailed customer service Sunday night and included a picture. On Monday morning I got a call from Eastwood. They shipped a new element out that day and i received on Wednesday. Awesome job. The system works as described. The alligator clip could be better.
    Easy to Use Great Finished Product (Posted on 1/3/14)
    Review by George
    Watched the video, purchased the system, arrived quickly. I have powder coated large skid plates (in steps) and even nuts and bolts. The finish is great, setup is quick, cleanup is easy, and I am very pleased.
    Uneasy sale service but great value when said and done! (Posted on 5/5/12)
    Review by Evan G
    When I first received the package it was missing some parts, the color chart, and the infrared thermometer. I am getting this corrected EXCEPT for the infrared thermometer because they say it doesn't come with one. Feel free to check the "Content" tab EASTWOOD! It also does not include instructions on set up or how to operate! What gives?! I thought Eastwood would be more professional and full proof. Negative company experience but cheap and quality product. Overall, after you wing it and do some basic research it becomes fun and effective! Mixed emotions here but as long as I never have to deal with Eastwood again I will buy more of their products.

    3 Item(s)

    per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register