Abrasive Blast Intro Kit

    Item #13944 Brand: Eastwood


    Give abrasive blasting a try with this introductory Abrasive Blasting Kit This kit lets you try abrasive blasting without a large initial investment. Just connect the blasting gun to your home compressor, put on your protective gear, and place the pickup tube in the bottle of ground glass blast media (included).
    • Suction head draws abrasive grit into the air stream
    • Trigger action lets you blast when and where you want
    • Ground glass media removes rust, paint and more
    • Requires 7 cfm at 80 psi

    About Abrasive Blast Intro Kit

    Suction head draws the abrasive grit into the air stream to minimize surging or skipping, and accelerates the media. Silica-free, 40/70 ground glass abrasive blast media is a smart, non-hazardous substitute for silica sand and slag, and works best for paint, carbon and light rust removal.


    Abrasive Blast Gun with pickup tube
    Ground Glass Blast Media, 10 lbs.


    1377910LBS Additional Ground Glass Media - 10 lbs.
    13779 Additional Ground Glass Media - 50 lbs.
    11806 Automotive (Medium) Bicarbonate Soda Media
    22095 Deluxe Sandblasting Hood
    22044 Replacement Steel Nozzle Set
    22043 Replacement Ceramic Nozzle Set


    Use a properly fitted dust mask or respirator, safety glasses or safety shield, plus heavy gloves, long pants and a long-sleeve shirt to protect exposed skin. Make sure the deadman valve is operating properly by depressing the valve lever and releasing; the nozzle should close under its own spring pressure. If not, do not use the deadman valve until the spring or obstruction is repaired.

    Customer Reviews

    3 Item(s)

    per page
    very poor (Posted on 7/28/2014)
    Review by jeff
    did not work junk
    bad product (Posted on 9/27/2013)
    Review by Jack
    The fill hose was rotten. I replaced it with same type hose and it still would not pick up the material. Used different pressure settings and still would not work.
    Works good, but only on small items (Posted on 5/13/2013)
    Review by brian
    Good product, and is complete. You can start blasting with everything in the kit, no need to go look for extra parts. Big problem is that unless you have a blast cabinet it is VERY messy. i had media all over my driveway. You need all protective gear listed in the manual, otherwise you end up arms stinging from the media because your hand is right next to the nozzle and from the media bouncing off the item it ends up in your hair and in your clothes.

    3 Item(s)

    per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register