Soda Blast Intro Kit
NOTE: Abrasive media shown in picture is NOT included; see #13944.
About Soda Blast Intro Kit
Try out soda blasting without a large initial investment with this kit. Just connect the gun to your 7 cfm at 80 psi compressor put on appropriate protection and put the pickup tube in the included bottle of soda blast media.The Suction head draws the soda into the air stream to minimize surging or skipping and accelerates the media at your part. Trigger action lets you blast when and where you want. The Maintenance M Soda Media is great for removingpaint, carbon, and other coatings.
Includes: Blast Gun with pick up tube, 10LBS Bottle of Maintenance M Soda Media
13779 - 40/70 Ground Glass Media - 50LBS
13779 10LBS - 40/70 Ground Glass Media - 10LBS
11806 10LBS - Maintenance M Soda Media - 10LBS
11806 - Maintenance M Soda Media - 50LBS
22095 - Deluxe Blast Hood
22044 - Replacement Nozzle Set, Steel
22043 - Replacement Nozzle Set, Ceramic
Use a properly fitted dust mask or respirator, safety glasses or safety shield, plus heavy gloves, long pants and a long-sleeve shirt to protect exposed skin. Make sure the deadman valve is operating properly by depressing the valve lever and releasing; the nozzle should close under its own spring pressure. If not, do not use the deadman valve until the spring or obstruction is repaired.
Two Thumbs Up!
(Posted on 11/19/13)
Review by Anthony
Quality Price Value
(Posted on 5/13/12)
Review by Trey
Price Value Quality
1- the siphon hose is a bit thin so it does collapse on you unless you hold it in a good angle.
2- if you have a small pancake or potbelly air compressor expect to blast, wait, blast, wait...
The thing I do like about the kit is that you can use other media not just the soda included with the gun.
Oh and be warned once you buy this you may want to go back and get a blasting cabinet.