HVLP Paint Gun - Eastwood Evolution

Item #12776 Evolution Brand: Eastwood

Value
Quality
Price

7 Review(s)

Product Name	Price	Qty
HVLP Paint Spray Gun - Eastwood Evolution	Only $99.99 Sale $69.99
Evolution HVLP Gun & Aluminum Cup	Only $109.99
Evolution Gun & DeKups Starter Kit	Only $139.99
Evolution Gun 2 Tips & Cup Kit	Only $159.99
Evolution Gun 3 Tips & Alum Cup Kit	Only $179.99
Evolution 2 Guns & 3 Tips Kit	Only $249.99

Add to Wishlist

Details

Advanced engineering in our Evolution™ HVLP Paint Gun is just 1 reason it's your next "must-have" spray gun...it's also lightweight, ergonomic, and sprays beautifully! The Eastwood-engineered Evolution™ HVLP Paint Gun is a uniquely versatile, gravity-feed paint gun that performs and feels like no other paint gun. Start with an air cap and nozzle designed to generate superior atomization, resulting in a finish you'd normally expect from more expensive, higher-end, professional guns.

Paint longer with less fatigue! High-tech, ergonomic composite body is precision-balanced and lightweight
Save set-up time! Indicators on the air/paint adjustment knobs let you revert back to your favorite settings
Latest spray atomization technology and HVLP transfer efficiency
Includes 1.4mm nozzle and needle (other sizes available)
Built to last, even in professional environments
Available in multiple configurations featured below.

Evolution Paint Gun Stand

Only $24.99

Two Stage Desiccant Dryer System

Starting at: $19.99

Pure Air 2000 with Opti-Fit Respirator - Med

Only $479.99

See this product in action!

About HVLP Paint Gun - Eastwood Evolution

Internal stainless steel components let you work with all types of coatings, including waterborne and solvent-based paints. Lower air inlet knob allows quick on-the-fly adjustments. Wide spray range (up to 8") for small to large surfaces. 1/4" NPT air fitting. Requires 12 cfm at 43 psi. Final product imported.

Evolution™ HVLP Paint Gun
1.4mm Air Cap, Stainless Steel Needle/Nozzle Set
600cc Plastic Cup (solvent-resistant)
Tool Kit

DeKups Adapter for Evolution gun
3M PPS Adapter for Evolution gun
SAS Bandit Respirator
50040ZP Master Paint Kit
10041Z PRE Painting Prep
51559 Digital Regulator
20474 4-Stage Air Dryer System

Click Here for product instructions

Always wear eye, skin and respiratory protection when painting. Always paint in a well-ventilated area. Follow paint manufacturer's instructions and MSDS for specific safety warnings and precautions.

3-year warranty. Designed, engineered and tested to Eastwood specifications.

Customer Reviews

Not a fan (Posted on 4/9/13) Review by Michael

Price
Value
Quality

First let me say I am a big Eastwood fan and loyal customer. I buy all of my powder from them and most of my other auto restoration supplies. I usually think that if Eastwood sells it, it must be good. My friend Mark thinks the same. He bought one of these guns right after they came out. I used it only once and did not like it. I have been painting for 35 years, so I do know what I am doing. No matter what I did, I could NOT get a nice fan pattern with good flow and even coverage. I tried completely disassembling and cleaning; no difference. I switched to my DeVilbiss, and the paint sprayed beautifully. At $4 - $5 per ounce for Dupont Chroma Base, you don't want to waste much paint. I told my friend to get a refund on it, and he has since purchased a DeVilbiss GTI. It may not be fair to compare Eastwood’s gun to the DeVilbiss, but if Eastwood is going to market the gun as “resulting in a finish you'd normally expect from more expensive, higher-end, professional guns”, they better take a good look at the gun. I was not impressed.

craters (Posted on 1/17/13) Review by superhl

Value
Quality
Price

Not sure what is wrong, but i keep getting craters. Seems like something is stopped up somewhere. I have clean several time but still getting same results. Any suggestions/

Disaster of a Paint Gun (Posted on 8/7/12) Review by HarleyRestoMod

Price
Value
Quality

When I first used this gun I was getting trash in the paint to find it still had manufacturing material inside the gun. Had to a total disassembly to clean. This should have been a clue as to what was to follow.

First pass with Dupont ChromaClear produced large craters in the paint. WTF! I had paint reps involved and they were stumped as well. We though it was some time of contamination so I replaced everything but the compressor (filters, hoses, dissicant, etc) with no luck. Even bought new paint. Only thing left was the gun so tried various setting and found that as the paint vol increased so did the size of the craters. If I turned it down very low they disappeared. Further inspection found that all the air ports on the bottom part of the nozzle are partially covered ... manuf defect. I suspect this is causing the gun to intermittently blast large drops of paint on the surface causing the craters. I could have purchased a $400 paint gun with what this one has cost me in wasted paint. My trash Harbor Freight gun does a better job.

I'm surprised Eastwood would put their name on something with such poor quality but as the saying goes "You get what you pay for".

To add insult to injury, can't get a Eastwood Tech to call me back. I've been an Eastwood customer for a long time but those days are over.

**** Eastwood Tech Team Response: ****

First, I apologize for the trouble you have gone through and want you to know we are doing everything possible to keep this from happening again.

We immediately checked our inventory and attempted to reproduce the issue without success. We did however uncover an issue which most likely contributed to your problems. Silicon mold release agent was not properly cleaned from some of the guns prior to shipping. This was observed on the outside of some of the guns and in internal passages after destructive testing was performed.

Our manufacturing team has put in place corrective actions and we are confident that this should not happen in the future.

Sincerely,

The Eastwood Company Tech Team

good (Posted on 4/25/12) Review by alex

Price
Value
Quality

i used this gun to paint my bro prelude fender and it sprays good, good grip, easy to use i would recommend this product

Amazing gun! (Posted on 4/14/12) Review by Wolffie

Price
Value
Quality

This gun performs! I'm new to automotive painting and with the help of this gun, I achieved great results. My 30 gal compressor had no trouble keeping up. And for $100 you won't be disappointed.

good gun for the money (Posted on 4/6/12) Review by julio

Quality
Price
Value

i used this gun just for waterborne paint it spray like a Devilbiss CVi and that a high end gun so going to buy one more this a gooooood gun to have

Retool the upper hand position grip (Posted on 3/12/12) Review by Oldhuldy

Price
Value
Quality

I used this sprayer for my first paint project. After laying the primer I had two neat holes in both my thumbs. Did anyone who tested the prototype (there was a prototype, right?) discover the sharp edges over the thumb rest in the upper hand position of the grip? The FINEX 3X I borrowed from my neighbor did not leave me with these reminders that he paid alot more $ for his that I did for my Evolution. So, I Dremeled and smoothed off the edges and hope to finish the project after I heal up a bit. .Hmmmm? (retool please)