Eastwood Rubberized Rust Encapsulator - Black Aerosol

    Item #13651Z

    Price
    Value
    Quality
    19 Review(s)

    Details

    "Rubberized" Rust Encapsulator stays flexible as it stops rust in its tracks Eastwood's Rubberized Rust Encapsulator is the flexible version of our high-performance rust inhibitor coating that applies directly over rust or bare metal to provide long-term corrosion protection.
    • Flexible finish protects surfaces from abrasions, and deadens sound
    • Epoxy-fortified for better adhesion and durability
    • Withstands up to 250°F
    • One aerosol covers about 10 square feet


    Due to regulations pertaining to recycling, we are unable to ship this product to Alberta, Canada.

    About Eastwood Rubberized Rust Encapsulator - Black Aerosol

    Unlike off-the-shelf under coatings, the Rust Encapsulator rubber coating can be applied directly over rust and without the “bubbling” that creates air pockets thus trapping rust. Since its engineered with high-tech flex agents, its pliable finish protects surfaces from abrasions, road hazards and deadens sound. So durable it exceeded 1,000 hours of salt spray chamber testing, this surpasses the standards for a 2-component catalyzed coating! Simply apply directly over rust or bare metal; no need to topcoat. Remains flexible and durable. Satin black finish.


    Contents

    Aerosol net weight 15 ounces


    Accessories

    10041z PRE Painting Prep 16060z Rust Encapsulator 51483z Rust Converter 12515z Internal Frame Coating 11175z Extreme Chassis Black 10025z Original Chassis Black 10025z Original Chassis Black 10020z Exhaust Paint


    Application

    Use a wire brush to remove loose rust, scale and paint, and remove dust, grease and oil deposits. Feather surrounding paint with 220-grit sandpaper. Shake can for at least 2 minutes once the mixing ball starts to rattle. Hold the Rubberized Rust Encapsulator can 10"-12" above surface as you spray. A single coat dries to the touch in 20 minutes, and is thoroughly dry in 3-4 hours at 68°F. For greater durability, a second coat can be applied 1 hour after the first. Allow 6-8 hours after the last coat before applying topcoat. Use over or under body fillers.


    Safety

    Always wear eye, skin and respiratory protection. Always apply in a well ventilated area away from open flame. VOC Content- ABP Max MIR 1.55


    Warranty

    MADE IN THE USA


    Application

    Ensure surface is clean and free of greases, oils and debris. Shake well. Ideal application conditions are 70°F at 50% or less humidity. Hold can 10-12" from surface, apply medium coat to ensure maximum adhesion. Will flash dry in 30-60 minutes, full cure in 24 hours. Apply coats in minimum one hour intervals. No topcoat is needed, because of its flexible properties a topcoat may not adhere. Do not apply to hot surfaces such as exhaust systems, engines or transmissions.


    Customers also viewed:

    Customer Reviews

    Items 1 to 10 of 19 total

    per page
    1. 1
    2. 2
    Excellent Product (Posted on 5/16/14)
    Review by Robert
    Quality
    Price
    Value
    Purchased this for the underside of my truck, was rusting at the body seams. I read a few other reviews about the nozzle clogging, not drying, etc. I'm going to continue saying this product worked 100% flawlessly for me with absolutely no issues. It goes on smooth, cures as it should and looks fantastic! Thanks Eastwood!
    Works well (Posted on 1/28/14)
    Review by Thomas
    Price
    Value
    Quality
    Best product I have found for pans, inside doors-trunks, even on running gear. Works well as a sound deadener.
    rubberized rust encapsulstor (Posted on 10/28/13)
    Review by kenneth
    Price
    Value
    Quality
    This is like a factory finish. The best I have ever
    Used. I used it on the frame of my 08 chevy
    Silverado. Nice black finish and very professionally looking. Thanks eastwood
    For the products you guys develop.
    FJ 40 Restore (Posted on 9/29/13)
    Review by Brian
    Price
    Value
    Quality
    I am almost positive the Japanese had no idea of undercoating or rust protection was in 1970. My 1970 FJ40 Land Cruiser has a lot of rust but using Eastwood Rust Converter and Rubberized Encapsulation paint has made this project much easier. The amount of sanding and grinding has been cut in half and makes my restore look professional. Its easy to use and easy to apply. Best of all I know that when its done this classic may have another 43 yrs left in her because rust is going to be a non-issue
    I like it (Posted on 9/28/13)
    Review by CobraII
    Quality
    Price
    Value
    This RRE sprays on very clean and covers great. The finish is really nice. seems very durable as promised.
    great product (Posted on 9/25/13)
    Review by richard
    Price
    Value
    Quality
    great product, easy to lay down on surface. spray lightly, let cure. looks great!
    Clean look (Posted on 9/22/13)
    Review by 78CobraII
    Price
    Value
    Quality
    Sprays on nicely from the can. Clogged some, but dipped nozzle in mineral spirits and ready to go. Mine had a texture to it that I like a lot. I have done my gas tank and will try quarts of it to do my floorpans.
    It doesn't spray well at all....Bummer! (Posted on 9/4/13)
    Review by TC
    Quality
    Price
    Value
    Like with its brother the Rust Encapsulator, I have had MAJOR problems applying this product in the hotter weather. It doesn't spray well at all. Using a FULL CAN, it clogs and sputters then just STOPS! The product certainly seems to cover well when it sprays, but this one MAJOR flaw prevents me from giving it ANYTHING higher that a 3 star rating. Eastwood, what are you going to do??
    Rubberized rust encapsulate (Posted on 8/9/13)
    Review by Ken
    Quality
    Price
    Value
    Sticks well, provides a nice surface. Nozzle does clog though.
    Great stuff...nozzle clogs (Posted on 6/9/13)
    Review by Andrew
    Price
    Value
    Quality
    Had to clean nozzle twice in acetone to use all contents of can but when this stuff cures its as hard as a rock! Use stuff applied with paintbrush when possible...

    Items 1 to 10 of 19 total

    per page
    1. 1
    2. 2

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register