Evercoat® Featherfill G2 Gray Gallon

Item #19781 ZP

Price
Value
Quality

2 Review(s)

Only $79.99

Qty:

Add to Wishlist

Details

When you need more filler over self-etching primers, use Evercoat FeatherFill® G2™ Many shops commonly apply self-etching primer to bare metal surfaces. But most polyester fillers and epoxy primers should not be applied directly over self-etching primers. So what do you apply when you need additional filling? Feather Fill G2 is the answer.

High-solids, high-build formula is an excellent foundation for any paint system
Use your primer gun with a 1.7mm-2.2mm nozzle
Eliminates body filler staining

Eastwood Contour Polyester Primer Surfacer

Starting at: $21.99

Eastwood Contour Premium Body Filler Kit

Only $69.99

1 Review(s) | Add Your Review

About Evercoat® Featherfill G2 Gray Gallon

Use Evercoat FeathercFill® G2™ over properly prepped steel, galvanized steel, aluminum, fiberglass, SMC, OEM finishes, body filler, and 1K and 2K self-etching primers. Compliant with California and National Rule VOC regulations.

This sprayable polyester filler offers exceptional flow and leveling, smooth spraying, easy sanding, fast dry-to-sand time and a shrink-resistant formula. Sprays with your primer gun with 1.7mm-2.2mm nozzle. Includes liquid hardener.
Due to regulations pertaining to recycling, we are unable to ship this product to Alberta, Canada.

1-gallon can of Gray FeatherFill®, plus hardener

14065 Additional Hardener

Click Here for Material Safety Data Sheet

Customer Reviews

Featherfill G2 Gray Primer - Really Good Stuff! (Posted on 7/10/12) Review by RHUNT

Quality
Price
Value

Good primer with high fill characteristics. Be sure and really stir up the container because there are a lot of solids on the bottom after the container has been on the shelf a while. Can be thinned with Acetone, which is the best to slow down the drying time. Add the Acetone if you are spraying in summer temperatures like we have here on Texas mornings (88 to 95 degrees F.) Use a 2.0 mm nozzle as a minimum, because this stuff is quite thick. Flows on very nicely when thinned. Use two coats to cover any body fillers. Dry sands (220 grit) without clogging the paper. One more coat, then 400 grit and then the topcoat. Very good product. Cleans up with Acetone.

Great stuff but be sure to have a 2.0-2.2 gun nozzle tip (Posted on 8/30/11) Review by Ron

Value
Quality
Price

Stir, stir, stir! Make sure there are no lumps in this before shooting. My results were best with a 2.1mm spray gun nozzle. Anything smaller runs the risk of clogging the gun. Builds up low areas nicely. Relatively EZ sanding.