Eastwood's Plasma Cutting Guide

Item #13689

Value
Quality
Price

6 Review(s)

Only $59.99

Sale $49.99

Qty:

Add to Wishlist

Details

This Eastwood Plasma Cutting Guide allows for easy cutting of straight lines, curves, radii, and circles with minimal finishing.

The versatile center mount allows you to center the cutting guide for circles and radii using either a punch or drilling a hole.

Circle attachment cuts 3 3/4" to 17" diameter circles
Specifically designed to fit the Eastwood Versa Cut Plasma Cutter
Will also work on other torches with a 0.95 Inch Nozzle

Plasma Shades - Plasma Cutting Glasses

Only $9.99

1 Review(s) | Add Your Review

Cylindrical Wire Brush - 5 pack

Only $14.99

Sale $12.99

5 Review(s) | Add Your Review

Welding Gloves Large & Medium

Starting at: $14.99

See this product in action!

About Eastwood's Plasma Cutting Guide

The Eastwood Plasma Cutting Guide allows for easy cutting of straight lines,curves, radii, and circles with minimal finishing. The versatile center mount allows you to center the cutting guide for circles and radii using either a punch or drilling a hole. The circle attachment can cut up to a 17 inch diameter and down to a 3 3/4 inch diameter. This cutting guide was specifically designed to fit the Eastwood Versa Cut Plasma Cutter. This cutting guide will also work on other torches with a 0.95" Nozzle.

Includes Eastwood's Plasma Cutting Guide with Circle Cutting Attachment

Click here for product instructions

Always wear approved eye protection and gloves. Do not use around flammable materials. Refer to your Eastwood Plasma Cutter Instruction Manual for additional safety information.Do not touch Plasma Cutting Guide with bare hands while in use!Plasma Cutting Guide may become hot with use, handle carefully with gloves.

Customer Reviews

Works well with my Hobart Welder (Posted on 3/21/13) Review by FireForge

Quality
Price
Value

I bought this knowing that it was not designed for my Hobart Plasma cutter...but for the price I figured I couldn't go to far wrong. The cutter does not fit in the designed direction...but if you flip it over...the cutting head fits right in and holds the cutting tip at the right height. I can cut either direction just by holding the tip in the cutter with one hand and holding the guild in the pre-drilled hole with the other. Takes a little practice...but I can now cut perfect circles and arches with just a little clean-up grinding. Glad I found this tool...thanks Eastwood...FireForge Art Glass

Works well if used in counterclockwise direction (Posted on 2/16/13) Review by onebun

Price
Value
Quality

I found that if you are cutting out circles, you must move in a counterclockwise direction. Otherwise(as slag builds on the bottom side of the center rotating ring) the unit rotates as a whole and unscrews the outer nozzle allowing the electrode to lower and touch workpiece, thereby burning up the electrode and inner nozzle. Aside from that it works as advertised.

Excellent (Posted on 1/16/13) Review by Kenny

Value
Quality
Price

Let me start off I knew it wouldn't work Keep reading
Simple but well-made Excellent value I knew I would have to send it to my machinist To work on my spectrum 625 extreme Going to buy one more for other machines Most my work is one-off prototype The only thing that I would have to say negative Need to think outside the box on designing To make it more versatile for other Machine Not everybody has the luxury of a machinist In their shop
Thank you.
Kenny

Product works well (Posted on 1/1/13) Review by David

Quality
Price
Value

Surprised by the earlier reviews - The arc started with no problem using my Eastwood plasma cutter running on 120V. The instructions are explicit about positioning the plasma head in the tool. There are two positions possible - one will place the plasma head close to the surface, the other way it most likely would be too far away to strike an arc. Although I didn't have a problem cutting a circle with the current guide, Russell's comment about a magnetic/screw center holder is a good one. To keep the center point from walking around I just drilled a small hole to keep the point centered. I'm going to cobble a magnetic center point together and give that a try.

can't get the plasma cutter to start cutting (Posted on 12/5/12) Review by Russell

Quality
Price
Value

I had been waiting for this product to come out for a long time.I was very disappointed. no magnet to hold the circle cutter guide to the metal. No threaded hole to hold it to the metal with a screw either.that Means 2 hand operation Worst of all with the plasma cutter hooked up to 220 and the amperage turned up all the way the arc will not start cutting on 14 gauge sheet metal,

Doesn't Work (Posted on 10/14/12) Review by Audio Dave

Quality
Price
Value

The plasma cutting guide doesn't allow the tip of the plasma cutter to come close enough to the metal to start the cut. My Eastwook plasma cutter does not start a cut unless the tip of the cutter actually touches the metal to be cut. Then, the cutter works OK. The wheels on the cutting guide do not allow the cutter to start the cut. All that happens is the metal gets slightly discolored from the plasma cutter "arc".. I have emailed AND called Eastwood about this problem, but I have not received any replies. Did someone say that Eastwood customer service was good? Not for me!!
BTW, even handheld, the cutter tip needs to touch the metal to start the cut (much like "striking and arc" with a stick welder). I guess I am done with Eastwood. You really do get what you pay for.