Eastwood TIG Welder, Plasma Cutter & Cart Kit

    Item #14037 Brand: Eastwood

    Heavy Item-Special shipping charges may apply.


    Save BIG money when you get our TIG 200 Welder PLUS our Versa-Cut Plasma Cutter, and organize it all on the Cart included! Click on the individual links below for all the specs, but you must click the "Add To Cart" button below to get the special savings over individual prices!

    Eastwood-engineered TIG 200 AC/DC Welder offers professional-quality TIG welding at an affordable price!
    • This exceptional TIG welder operates on either 110vAC, 15-amp circuit or 220vAC, 30-amp circuit
    • 1/4"-thick welding capacity
    • High-frequency start for precise arc control
    • Square-wave inverter for accurate aluminum welding
    The Eastwood Versa Cut Plasma Cutter works with either 110v or 220v input to easily slice through steel and non-ferrous metals up to 3/8" thick.
    • 110v or 220v AC input with inverter technology
    • 20' torch cable; 10' ground cable with clamp
    • Rated 40-amp output
    • Now with a black powder-coat finish
    Our Multi-Unit Welding Cart is designed specifically to keep all your Eastwood welding and cutting equipment and accessories organized.
    • Top shelf holds the TIG-200 welder (or either of our MIG welders)
    • Bottom shelf holds the Versa-Cut Plasma Cutter
    • Middle shelf is for welding supplies storage
    • Gas-bottle mount includes a TIG rod holder

    Click here for welder warranty information

    About Eastwood TIG Welder, Plasma Cutter & Cart Kit

    TIG200 Welder
    Weld it all with the Eastwood TIG200 200AMP welder! The TIG200 features an AC/DC switch that allows both steels and aluminum to be welded with the same machine. With a 14' torch and a 10' ground cable, you'll be able to get into any space with this exceptional welding machine. It has pre/post flow adjustment knobs to protect your weld and torch. If that's not enough, it even has a foot pedal to control amperage so you can get going quickly and not need to dial-in the machine for a specific material. Included is the TIG200, torch, ground cable/clamp, regulator/hose, and is powered through a NEMA50 plug.

    Plasma Cutter
    This innovative, affordable, best plasma cutter was designed and developed by Eastwood's own R&D staff, and tested in-house on the same type of real-life projects you'll use it for. It doesn't matter where you need to work, because this plasma cutter's voltage-sensing technology lets you use either a 110v or 220v outlet with our adapter cord. Works with any standard home- or shop-type air compressor within a range of 20-65 psi; internal moisture separator ensures dry air is delivered to the torch. Rated 140 volts at 40 amps. Duty cycle: 60% at 40 amps. Weighs less than 30 lbs., for easier portability.

    Multi-Unit Cart
    This welding cart was designed to make storage, accessibility and maneuverability of your welder and cutter easier than ever before when metalworking. This cart incorporates a top shelf which will hold our MIG135, MIG175 or TIG-200 welder. The bottom shelf will store your Versa-Cut Plasma Cutter, while the middle shelf allows storage of necessary welding accessories. The Gas Bottle Mount even incorporates a TIG Rod Holder to store up to 6 different tubes of filler rods. Assembles with simple hand tools.

    What is "Plasma Cutting"? Plasma cutting utilizes a high-velocity jet of ionized gas (plasma) that conducts electricity from the torch of the plasma cutter to your metal workpiece. That directed plasma stream (about 30,000° F) heats the workpiece, converting the metal to molten slag. That high-velocity stream literally blows the molten metal away, leaving a clean, precise cut.


    TIG200 Unit
    Shielding Gas Regulator
    Shielding Gas Hose
    Ground Cable with Clamp (10ft)
    TIG Torch (17 Series) which accepts industry standard cups, collets, and collet bodies (14 ft.)
    Foot Pedal for Amperage Control
    110v-to-200v Adapter Plug
    Hand Held Shield
    #7 Cup (7/16"), #6 Cup (3/8"), #5 Cup (5/16")
    Long Back Cap, Short Back Cap
    3/32" Collet Body, 3/32" Collet, 1/16" Collet, 2.0mm Collet
    2.0mm Red (Thoriated Tungsten)

    Versa-Cut Plasma Cutter
    Torch Assembly
    Ground Clamp Assembly
    110/220v Adapter Cord

    Welding Cart
    Assembly Instructions


    •Input voltage: single phase 110 or 220 VAC (+/- 15%) @ 50-60Hz
    •Input amperage: 28 amp
    •Output amperage: 10-200amp AC/DC
    •No-load voltage: 51
    •AC duty cycle (%): 20-80 (80% at 100 amp- 20% at 200 amp)
    • Pulse duty cycle (%): 10-90
    •Post gas flow: 2-8 sec
    •Pre gas flow: 0.1-1 sec
    •Remote foot pedal and control: yes
    •Efficiency: (%): 80
    •Weight: 44lbs
    •The cleaning/clearance effect (AC balance control) of our unit is adjustable to provide wider cleaning with shallow penetration to narrow cleaning with deeper penetration. Changing electrode from EN (electrode negative) to EP (electrode positive
    )•The frequency is fixed at 60Hz which provides a little wider bead but with good penetration for aluminum and magnesium.
    •Our Tig 200 is constructed with inverter and MOSFET technology for optimum performance at a very affordable price.


    TIG Welding Cart
    Auto Darkening Welding Helmet
    Welding Jacket
    Large View Auto Darkening Helmet
    Welding Gloves


    1/6 Inch Collet Body
    3/32 Inch Collet Body
    TIG Torch Rear Back Cap
    3/8 Inch Diameter Ceramic Nozzle for TIG-200
    7/16 Inch Diameter Ceramic Nozzle for TIG-200
    1/16 Inch Diameter Torch Collet for TIG-200
    3/32 Inch Diameter Torch Collet for TIG-200
    1/16 Inch by 36 Inch 1 Pound Tube of ER70S-2 TIG Wire
    3/32 Inch by 36 Inch 1 Pound Tube of ER70S-2 TIG Wire
    1/16 Inch by 36 Inch 1 Pound Tube of 4043 Aluminum TIG Wire
    3/32 Inch by 36 Inch 1 Pound Tube of 4043 Aluminum TIG Wire
    1/16 Inch by 36 Inch 1 Pound Tube of 308L Stainless Steel TIG Wire
    1/16 Inch by 36 Inch 1 Pound Tube of 308L Stainless Steel TIG Wire
    3/32 Inch Diameter 2 Piece Green Tungsten for Steel
    1/16 Inch Diameter 2 Piece Red Tungsten for Steel
    3/32 Inch Diameter 2 Piece Red Tungsten for Steel
    2 Pack Stainless Steel Scratch Brush


    Consumable parts can be purchased through Eastwood


    Always wear a minimum #10 shade helmet, leather welding gloves, long-sleeve shirt and long pants. Do not use around flammable materials! Do not open machine! There are no user-serviceable parts! This cart is intended to hold an 80 CF gas bottle; using a bottle larger is not recommended.


    Click here for welder warranty information



    Click here for instructions

    Plasma Cutter

    Click here for instructions

    Customers also viewed:

    Customer Reviews

    Items 1 to 10 of 14 total

    per page
    1. 1
    2. 2
    over all does the job (Posted on 7/31/2014)
    Review by Jeremy
    I bought the combo kit and have used the plasma cutter several times. On 220 it smoked thru a big truck frame and motor home frame like nothing. on 110v it would cut for 20 seconds and trip the breaker. replaced breaker and same results. added 220v plug and no problems since
    For the money cant beat it (Posted on 6/10/2014)
    Review by kelly
    Got this setup 9 months ago I have about 30 + hours weld time with both aluminum and steel. The plas. was a bit of let down it just cant cut 3/8 well 1/4 in. is it's cap for a good clean cuts. This was a good enough set up I talked my boss in to getting one for the shop except he upgraded to the 60 amp plas. Over all 5 star package
    Overall very pleased (Posted on 5/12/2014)
    Review by James
    I needed the ability to weld and cut aluminum without the price or complication of the "blue" and "red" boxes. I have a few minor gripes about both machines but can live with them based on price point! First off, the Tig unit is physically large. This may be good (lots of cooling area inside) but if you are thinking about being able to use a "mig" cart with this unit, think again. Get the Eastwood tig cart with the flat top which is made for it. The electrode connection point on the front of the machine is not a standard size (dinse being standard) so fitting any other torches to the machine is going to be a challenge. The foot pedal has two cables running out of it to the welder. These are loose from the factory, nothing major I just ziptied them together. The literature with the machine is fuzzy about the ability to use alloyed tungstens (lanthanated and ceriated in particular). I haven't had the machine long enough to explore all possible combinations of tungstens to see what it works best with but I will be before long. The plasma cutter is phyiscally very small for such output. The 40 amp machine is rated at 3/8" severence and I believe that's selling it short. I was able to whiz through 1/4" steel quickly. I LOVE the pilot arc feature on the plasma, my older plasma had no pilot feature so it was basically a "lift arc" plasma torch. It resulted in a lot of cutter tip replacements due to fouling from blowback. So far I've sliced through aluminum plate, steel plate, and steel tube with the plasma and it handled them all easily. As others have mentioned, the "helmet" they provide the machines with is utterly useless. Eastwood would be better off just not even including it and warning potential buyers that they needed to purchase a true welders helmet before using the product. Other than these small complaints, I'm very pleased with all three components in this bundle. They all worked straight out of the box and functioned as promised.
    Very good with one exception (Posted on 4/7/2014)
    Review by Lynn
    I am pleased with the TIG and Plasma cart combo. It is a good value and performs well. However, about a half-hour after beginning to use the TIG, the argon regulator gauge ceased to go below 40. The gas still flowed, but I couldn't tell what the pressure really was. The regulator looks a little on the cheap side, so I decided not to bother with the hassle of getting a replacement and bought a more professional regulator.
    OK Product Bad Customer Service (Posted on 12/2/2013)
    Review by John
    I bought this product to add to my garage... Seems to be an okay product but NOT WORTH THE $2400 that was charged to my credit card. FIRST and LAST time I will EVER BUY anything from this COMPANY!!!!! My credit card statement says I was charged twice for this product... But EASTSIDE says I was only charged once... Who am I to believe, What is clearly in black and white with my credit card statement or the Packing Slip from Eastwood that has $1,199.99 printed THREE times on it and says I was only charged once?!?!
    Very upset overall (Posted on 10/29/2013)
    Review by Mikey
    I hate to be that guy who comes flying in with nothing but bad things to say, but I have no choice. I am extremely frustrated with this combo. I purchased this based off reviews and went into it knowing that it was sort of a gamble, but knew that if I got a defective machine, Eastwood would be quick to replace it. Well the TIG welder went out on me during my second time using it. I had to dig through my rafters for the packaging and box everything back up and ship it out before Eastwood would send me a new one. A month passed and I finally got my new TIG and it's been working fine but I'll always be a bit hesitant about it.

    Then I tried out the plasma cutter. Set everything up and let it rip, a mere 5 seconds later it stops working. Frustrated, I emailed Eastwood and he said the torch sounds bad and that he'll send a new one. 3 weeks later it arrives, I set everything up and it stopped working after 3 cuts! I don't even want to try to replace this thing, I want it out of my life forever and will look elsewhere to invest my hard earned money. This is just unacceptable, how can these products be this inconsistent? I have wasted more time dealing with the dilemmas of this combo than actually using it. You might have better luck than me but I just don't think it's right to sell a product that is so unpredictable. I wish I would've waited a little longer and spent a little more on something that will actually work.
    tig200 welder plasma cutter 40 and cart combo (Posted on 7/30/2013)
    Review by James
    this product has exceeded my expectations its easy to use and works very well. i had a small problem with the cart ,the axle was short so i could not put wheels on. i called customer service they were quick to answer the phone ,they spoke good english ad took care of the problem quick and hassle free
    Big bang for the buck! (Posted on 7/5/2013)
    Review by greg
    Got my combo today,Set it up and i must say I was a little skeptical at first.. But I was amazed how well it welds! Easily did 1/8" aluminum using only 110 ! Cant wait to see what 220 can do! also will be looking to retro fit a miller cooler to it ! have not tried the plasma cutter yet .
    excellent (Posted on 6/20/2013)
    Review by Will
    Was a little worried about quality because of such a low price, but am very pleased with the quality of welds and ease of use, cart fits and organizes everything great, andplasma works awesome, shipped very quick and cheap as well
    parts missing, and broken (Posted on 5/24/2013)
    Review by Some guy
    The plasma cutter had internal air leaks. Tried to get to the "legendary" customer service but the calls went to voice mail and the voice mail box was full multiple times. Finally left a couple messages but no return calls ever came. Didn't want to return the entire box so I took the cover off and found the brass fittings were as tight as they could be, had Teflon tape on them and were CAULKED and worthless. The 2 between the air filter and the entrance to the air gauge adjustment leaked air like they were hand tight. spend 2 hours getting parts and replacing them.
    The cart went together easyly but it was a bolt and a nut shorrt so that was another trip to Ace.
    I havent even turned the TIG on yet so I'm not sure about it.

    Items 1 to 10 of 14 total

    per page
    1. 1
    2. 2

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register