Eastwood Plasma Cutter 60 Amp Versa-Cut

    Item #14099 Brand: Eastwood

    Price
    Value
    Quality
    19 Review(s)
    Heavy Item - Special shipping charges may apply.

    Details

    Versa-Cut 60 Plasma Cutter easily slices through materials up to 7/8" thick. Our Eastwood-designed portable plasma cutter is your smartest choice for making clean, fast cuts through steel, stainless or aluminum as thin as 24-gauge, or as thick as 7/8". Compared to mechanical cutting, our Versa-Cut 60 Plasma Cutter works significantly faster, and makes curved and intricate cuts more easily and precisely. A built-in pilot arc system allows for instant arc striking and ease of use when cutting rusty material and expanded metal. The internal moisture separator helps to ensure clean dry air gets to the torch to give you consistent results.
    • 220v AC input
    • 20' torch cable; 10' ground cable with clamp
    • Rated 60-amp output
    • Air flow rate: 5-7 CFM at 20-60 PSI
    • Backed by Eastwood's no-hassle 3-year warranty

    Click here to see our Versa Cut 60 set-up chart

    About Eastwood Plasma Cutter 60 Amp Versa-Cut

    220-volt, 50 to 60Hz, 60-amp-output portable plasma cutter is designed to cut steel, aluminum and stainless steel from 0.010- to 0.875-inch with ease. Heavy-duty Mosfet inverter, internal moisture separator, 20-foot torch and 10-foot ground cable with adjustable air pressure regulator assure long life, accurate cuts and ease of use. Also includes self-starting arc for use on floor panels and exhaust where rust and contaminants may be an issue.


    Specifications

    60-amp output, 220-volt AC input, 60 or 50Hz output. 60% duty cycle at 60 amps. 40 lbs.


    Accessories & Consumables

    Parts & Consumables

    12814 Versa-Cut Nozzles, 10 pcs.
    14344 Versa-Cut 60 Electrodes, 10 pack

    Accessories

    13689 Plasma Cutting Guide
    13948 Plasma glasses
    Cut 60 outside nozzle - 14557
    Cut 60 guide - 14555
    Cut 60 Torch Assembly - 14343


    Instructions

    Click here for product instructions


    Safety

    Always where eye, hand and face protection when cutting.


    Warranty

    3-year warranty. Made in China.


    Customers also viewed:

    Customer Reviews

    Items 1 to 10 of 19 total

    per page
    1. 1
    2. 2
    ADIOS CUT OFF WHEEL!!!!! (Posted on 6/30/14)
    Review by Jonathon
    Quality
    Price
    Value
    This is my very first cut off wheel.
    Im a garage fabricator, for fun, and tired of the cut off wheel and trying to get fast cuts.

    Measure, use a guide, like an angle ruler, and watch it melt away like butter!

    SUPER IMPRESSED! SUPER EXCITED!

    And the 3 year warranty makes it all worth while.

    I had a Millermatic 211, sold for $930, picked up a combo deal on ebay, Versa 60 & MIG 175, for $1100 from Eastwood.

    Couldnt be happier!!!!
    Great over all (Posted on 6/24/14)
    Review by Michael
    Value
    Quality
    Price
    I have now used it quite a bit and at this time no problems I am concerned due to the expense of the consumables and that the torch uses threaded electrodes I have not seen them advertised on the site however I was reading other posts and they called tech service and they got the right ones we will see over all still impressed with unit
    Excellent (Posted on 6/12/14)
    Review by Michael
    Quality
    Price
    Value
    Just opened up the box and wow what a difference between the E-Bay chinese units and this one the first thing i noticed was the torch was a trafimet with a real trigger not like the one i returned with a little flapper for a button, and it came with a flow guage to check the pressure coming out of the torch. The only thing i wished it had was a 20' ground cable to match the 20' torch, would make sense right. I noticed the post flow was longer than my previous unit witch i feel will extend the tip life a lot. I use this for hobby use at home and with 60 amps available it's more than enough. Will write a review after using it for more than a couple times.
    excellent product (Posted on 5/27/14)
    Review by arnold
    Price
    Value
    Quality
    response by your company to any problem has been excellent.
    This is my 3rd plasma cutter (Posted on 4/17/14)
    Review by Dale
    Quality
    Price
    Value
    My 1st plasma cutter blew a capacitor and was replaced in a timely manner at no cost to me. The 2nd one was faulty right out of the box. It would not hold an arc. Ed in Tech diagnosed as a bad torch lead. I now have my 3rd cutter that appears to be working great. The customer service I received was outstanding with no questions asked and no cost to me. I lost some time but I guess that's life. Considering the cost savings and the customer service, I am tickled to death.
    eastwood plasma cutter 60 map (Posted on 4/15/14)
    Review by russell
    Quality
    Price
    Value
    I bought item & wired up garage took about 2 1/2 weeks. Open box after wiring was donejust bought cable & clamp on ebay eastwood is doing nothing..So look out Buyers
    The replacement (Posted on 3/20/14)
    Review by David
    Quality
    Price
    Value
    I bought a Plasma Cutter 60 Amp Versa- Cut and had used it for Apx 30 minutes when it burned up. Called the company and they immediately told me that they would pay for shipping it back and send me a new one upon reciept of it. they did all the work. Sent Fed X after it in 2 days and i got a replacement in a week. at no cost to me. This one is working fine and no problems. Thank You Eastwood for being so nice.
    Website Needs Upgraded (Posted on 2/20/14)
    Review by Rev. Gerald
    Quality
    Price
    Value
    Product came the next day worked very well. My problem is the torch requires threaded electrodes. unfortunately, the website does not show threaded electrodes that fit my torch head. I ordered the electrodes listed on the website for Versa 60, but the ones that came did not have threads. Customer Service was very quick to replace the electrodes sent in error. I appreciated the quick service. The problem remains, the threaded electrodes needed are not listed on the website.
    Rate this 110% (Posted on 2/20/14)
    Review by Darrel
    Quality
    Price
    Value
    This plasma cuts steel like scissors cut paper. I have been making due with my old plasma for 15 yrs. It struggles with 1/8 thick sheet metal. I am amazed with this plasma. To help others, it is designed to continue to circulate air in order to cool tip.
    warrentee service (Posted on 2/14/14)
    Review by Dale
    Quality
    Price
    Value
    After about 3 months of purchasing my 60 amp Versa-Cut I heard a loud pop as I was cutting. It went dead! I called Tech. Support and was informed that the capasitor had likely failed. I was told they would have Fed Ex pick it up and they would send me a new unit. That's exactly what happened. Couldn't be happier.

    Items 1 to 10 of 19 total

    per page
    1. 1
    2. 2

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register