- Home
- New Items
- Eastwood TIG Welder 200 Amp DC
- Product Reviews
Details
Weld steel and stainless steel up to 3/16 inch thick*
Includes preset post and pre-flow gas, overload protection, adjustable amperage control for either panel (trigger switch) or foot pedal operation. Amperage adjustable from 10 to 200 amp, WP 17 style torch accepts all common electrodes and collets up to 1/8 inch. High frequency Mosfet inverter with high frequency start for precise arc starting and superior puddle and penetration control.
Includes preset post and pre-flow gas, overload protection, adjustable amperage control for either panel (trigger switch) or foot pedal operation. Amperage adjustable from 10 to 200 amp, WP 17 style torch accepts all common electrodes and collets up to 1/8 inch. High frequency Mosfet inverter with high frequency start for precise arc starting and superior puddle and penetration control.
- 110 or 220 volt
- 50 to 60Hz
- 200 amp output DC TIG welder.
*Please note: This welder does not weld aluminum. To weld aluminum please order our Eastwood TIG Welder 200 Amp AC/DC welder which has the high frequency AC setting needed to properly weld aluminum.
TIG Consumables Kit
Only
$29.99
|
Eastwood Self-Etching Weld-Thru PrimerStarting at: $11.99 |
TIG Wire ER70S-2 1/16-36in 1 lb Tube
Only
$10.99
|
See this product in action!
About Eastwood TIG Welder 200 Amp DC
110 or 220 volt, 50 to 60Hz, 200 amp output DC TIG welder. Includes preset post and pre-flow gas, overload protection, adjustable amperage control for either panel (trigger switch) or foot pedal operation. Welds steel and stainless steel up to 3/16 inch thick. Amperage adjustable from 10 to 200 amp,WP 17 style torch accepts all common electrodes and collets up to 1/8 inch.High frequency Mosfet inverter with high frequency start for precise arc starting and superior puddle and penetration control.
200 amp output, 110 or 220 Volt AC input, 60 or 50Hz output. 36lb weight
Always where eye, hand and face protection when welding.
Three year warranty against manufacturer's defects.
Customer Reviews
2 Item(s)
per page
-
Great Little Machine
(Posted on 3/25/13)
Review by TonyB -
Bought to use in my home shop, works great! So far 2 - ATV frames, 2- 10 point roll cages some engine cases (aluminum), Welds as nice as our MIller at work for 1/10 of the cost!Price Value Quality
Excellent for what i wanted it for, only thing is the foot petal is different than what every other uses.
Highly Recomended!
Eastwood Tech Note:
First, thank you for the great review! Wanted to note for other customer's reading this review that this Model #14100 is our DC TIG which does a great job on Steel and Stainless Steel but will not weld aluminum. It's possible TonyB has our AC/DC TIG Welder which will weld aluminum. -
Poorly made
(Posted on 12/23/12)
Review by Timothy -
1. Post-flow is twice as long as it should be.Quality Price Value
2. There is an internal leak in it, which drained a quarter of my argon tank.
3. The torch is a two piece design, which turns out of position when you "walk the cup."
4. I contacted Eastwood, and I received the replacement part, which was supposed to fix the first two issues, two week after I first contacted Eastwood. Sadly, it did not fix the problem.
5. I would like to return this item, but I do not have the boxes anymore, as I thought this was going to be a good buy.
2 Item(s)
per page
Buy online or call 1-800-343-9353
 |
 |
 |
 |
 |
 |
 |
|