Eastwood TIG Welder 200 Amp DC

    Item #14100 Brand: Eastwood

    Heavy Item - Special shipping charges may apply.

    Details

    Weld steel and stainless steel up to 3/16 inch thick*

    Includes preset post and pre-flow gas, overload protection, adjustable amperage control for either panel (trigger switch) or foot pedal operation. Amperage adjustable from 10 to 200 amp, WP 17 style torch accepts all common electrodes and collets up to 1/8 inch. High frequency Mosfet inverter with high frequency start for precise arc starting and superior puddle and penetration control.
    • 110 or 220 volt
    • 50 to 60Hz
    • 200 amp output DC TIG welder.

      *Please note: This welder does not weld aluminum. To weld aluminum please order our Eastwood TIG Welder 200 Amp AC/DC welder which has the high frequency AC setting needed to properly weld aluminum.

    About Eastwood TIG Welder 200 Amp DC

    110 or 220 volt, 50 to 60Hz, 200 amp output DC TIG welder. Includes preset post and pre-flow gas, overload protection, adjustable amperage control for either panel (trigger switch) or foot pedal operation. Welds steel and stainless steel up to 3/16 inch thick. Amperage adjustable from 10 to 200 amp,WP 17 style torch accepts all common electrodes and collets up to 1/8 inch.High frequency Mosfet inverter with high frequency start for precise arc starting and superior puddle and penetration control.


    Contents

    200 amp output, 110 or 220 Volt AC input, 60 or 50Hz output. 36lb weight


    Accessories

    13953 Eastwood TIG Consumables Kit

    12253 TIG Wire ER70S-2 1/16-36in 1 lb Tube


    Safety

    Always where eye, hand and face protection when welding.


    Warranty

    Three year warranty against manufacturer's defects.


    Instructions

    Click here for product instructions


    Customers also viewed:

    Customer Reviews

    7 Item(s)

    per page
    Great Value (Posted on 8/6/2014)
    Review by Another jack
    Value
    Quality
    Price
    Bought it to upgrade my roll cage to met SFI 25.5. It has plenty of power for .112 w chrome moly tubing. Weld like a high end unit!

    Adjustable Gas shutoff time would be nice.
    Great Value (Posted on 5/26/2014)
    Review by ROGER
    Value
    Quality
    Price
    I bought this to weld 18 gauge sheet metal. I've only used it at 110v and so far it is working fine. An excellent value for the price.
    CRAP DOA (Posted on 2/13/2014)
    Review by Lashika
    Quality
    Price
    Value
    Cant even use it, got it brand new shipping in 3 days got here and DOA! doesn't work. Stay far away.
    A very good unit for the hobbist (Posted on 11/16/2013)
    Review by Jack
    Quality
    Price
    Value
    My hobby is making gas tanks and underseat toolboxes for motorized bikes. I weld .048 sheet metal at low amp settings and this unit works great at 110v. The only problem was with the Argon regulator and Eastwood took care of that super fast. This is excellent to use and after I weld the parts up I powdercoat them with an Eastwood powdercoat setup(which is also an excellent buy) I highly recommend Eastwood products,these people do their homework.
    Really nice welder just one problem. (Posted on 6/11/2013)
    Review by Larry
    Price
    Value
    Quality
    I bought this welder on sale which was an incredible price. It was delivered with no damage to the box at all. I unpacked it and was really surprised by how nice the torch was and the cables were wrapped. I bought a brand new bottle of argon and hooked it up to use it for the first time. Everything was working great I couldn't believe how nice it was. Then just after using it for a short time I looked at the gauges on my tank and it was almost empty. I was checking for leaks and I found that it seemed to be coming from either the hose that connects the gauges to the back of the TIG welder or it could also be from the gauges too. I have put a call in to Eastwood tech support but like other reviews have said it goes to a voice mail so I left a message. I have called them before for my plasma cutter and they do call back and they do stand behind their products. I just hope that I am home when they call because I need this fixed. I was right in the middle of welding in a quarter panel on my 55 Chevy now I have to wait and I have to go buy more argon. This is very upsetting and costly but this could also happen with a very expensive name brand welder so what can you do. I like Eastwood products and I would buy this again if I had to do it over again.
    Great Little Machine (Posted on 3/25/2013)
    Review by TonyB
    Price
    Value
    Quality
    Bought to use in my home shop, works great! So far 2 - ATV frames, 2- 10 point roll cages some engine cases (aluminum), Welds as nice as our MIller at work for 1/10 of the cost!

    Excellent for what i wanted it for, only thing is the foot petal is different than what every other uses.

    Highly Recomended!


    Eastwood Tech Note:

    First, thank you for the great review! Wanted to note for other customer's reading this review that this Model #14100 is our DC TIG which does a great job on Steel and Stainless Steel but will not weld aluminum. It's possible TonyB has our AC/DC TIG Welder which will weld aluminum.
    Poorly made (Posted on 12/23/2012)
    Review by Timothy
    Quality
    Price
    Value
    1. Post-flow is twice as long as it should be.
    2. There is an internal leak in it, which drained a quarter of my argon tank.
    3. The torch is a two piece design, which turns out of position when you "walk the cup."
    4. I contacted Eastwood, and I received the replacement part, which was supposed to fix the first two issues, two week after I first contacted Eastwood. Sadly, it did not fix the problem.
    5. I would like to return this item, but I do not have the boxes anymore, as I thought this was going to be a good buy.

    7 Item(s)

    per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register