Versa-Cut 60 and MIG 175 Heavy Metal Fab Kit

    Item #14289 Brand: Eastwood

    Quality
    Price
    Value
    15 Review(s)
    Heavy Item-Special shipping charges may apply.

    Details

    Save BIG money when you get our MIG 175 Welder with spool gun PLUS our Versa Cut 60 Plasma Cutter! Click on the individual links below for all the specs, but you must click the "Add To Cart" button below to get the special savings over individual prices!

    Eastwood's MIG 175 Welder has "high-end" features at a DIY price! As a professional or weekend enthusiast, you can now get industrial-quality features in a hard-workin', affordable, MIG welder! Our R&D guys designed the Eastwood MIG 175 Welder (12012) for steel and aluminum to produce excellent bead quality and capabilities that match—and even exceed—the more expensive competition!
    • Welds mild and stainless steel, 24-ga. to 5/16"
    • Welds aluminum, 14-ga. to 1/4"
    • 30-175-amp welding range
    • Includes FREE spool gun ($199.99 value!)
    • Powered by 220v current
    • Compare to similar welding machines that sell for over $700
    • ETL Approved
    • Backed by Eastwood's no-hassle return policy and 3-year warranty

    The Eastwood Versa Cut 60 Plasma Cutter works with 220v input to easily slice through steel, stainless and aluminum as thin as 24-gauge or as thick as 7/8". 220-volt, 50-60Hz, 60-amp, output plasma cutter is designed to cut steel, aluminum and stainless steel from 0.010" to 0.875" with ease. Heavy-duty Mosfet inverter, internal moisture separator, 20' torch and 10' ground cable with adjustable air pressure regulator assure long life, accurate cuts and ease of use. Also includes self-starting arc for use on floor panels and exhaust where rust and contaminants may be an issue.
    • 220v AC input
    • 20' torch cable; 10' ground cable with clamp
    • Rated 60-amp output
    • Built-in pilot arc system
    • Internal moisture separator

    About Versa-Cut 60 and MIG 175 Heavy Metal Fab Kit

    Eastwood MIG 175with spool gun
    MIG 175 welder is designed for the professional or weekend enthusiast. Welder comes complete (except for the gas cylinder) and ready to weld 24-gauge to 5/16" mild steel and stainless, plus 14-ga. to 1/4" aluminum. Welder has a 30% duty cycle at 135 amps, and 30-175-amp welding range. Feeds wire at 58"-471" per minute, and has infinitely adjustable wire speed and heat settings. Includes a precision-drive motor, regulator with hose, spool gun (for welding 19-gauge to 1/4" aluminum plate), wire, tips and other welding supplies...just add your own cylinder of CO2/Argon. "Quick Set" weld chart specifies settings for each material thickness, eliminating guesswork and assuring complete penetration.

    Eastwood Versa-Cut 60 Plasma Cutter
    220 volt 50 to 60Hz, 60 amp output plasma cutter is designed to cut steel, aluminum and stainless steel from 0.010 to 0.875 inch with ease. Heavy duty Mosfet inverter, Internal moisture separator, 20 foot torch and 10 foot ground cable with adjustable air pressure regulator assure long life, accurate cuts, fine metal fabrication and ease of use. Also includes self starting arc for use on floor panels and exhaust where rust and contaminants may be an issue.


    Contents

    14099 Eastwood Versa-Cut 60 Plasma Cutter
    60 amp output,220 Volt AC input, 60 or 50Hz output. 60% duty cycle at60 amps. 40lb weight

    12012 Eastwood MIG 175with spool gun
    Includes Spool Gun with 9' cable (works with 2-lb. wire spools only), MIG Wire 0.030, Aluminum Wire 0.030, Gas Regulator with hose, 8' Ground Clamp, 8' Gun Cable


    Accessories

    Plasma Shades - Plasma Cutting Glasses

    Eastwood Welding Cart

    Eastwood's Plasma Cutting Guide

    Welding Jacket

    Large View Auto Darkening Helmet

    Welding Gloves


    Safety

    Always wear approved eye, hand and face protection. Do not use around flammable materials. Do not open machine. There are no user-serviceable parts.


    Warranty

    3 Year warranty against manufacturer defects.


    Instructions

    Click here for Eastwood MIG 175with spool gun instructions



    Click here for Eastwood Versa-Cut 60 Plasma Cutter instructions


    Customers also viewed:

    Customer Reviews

    Items 1 to 10 of 15 total

    per page
    1. 1
    2. 2
    Great Value (Posted on 6/9/14)
    Review by Troy
    Value
    Quality
    Price
    I ordered the Versa-cut 60 and Mig 175 combo kit to work on shipping containers. I have only had the product for 2 weeks however it has performed every task I have asked of them. This combo kit should be in everyones shop. Makes welding and cutting much faster and easier.
    Quaity product and service (Posted on 6/1/14)
    Review by Denton
    Price
    Value
    Quality
    I purchased the Versa-cut 60 and Mig 175 about 9 months ago, for a wood gasifier project. The Versa-cut has performed flawlessly as long as I keep the proper distance. The Mig 175 did have some issues at about 6 months. I emailed tech support and had a response back within 15 hours each time. After we isolated the problem they replace my unit without any hesitation. I would recommend these units to anyone, and want to thank Ed and Kelly for their assistance.
    Looking good so far... (Posted on 3/2/14)
    Review by Del
    Quality
    Price
    Value
    I purchased the Versa-Cut 60/Mig 175 combo at the end of December, along with the deluxe cart. I made my purchase at the retail location, so did not deal with any of the shipping process that others have faced. I went planning to purchase the Mig welder, but the combo pricing pushed me over the edge to give the plasma a try! While I have had limited time to use the equipment, I was able to test out both the welder and the plasma cutter on some 1/8 inch plate. Both have operated as described thus far. The plasma will take some practice, but should be quite useful. I'm operating both off a 30 amp 220 service in my garage at present, so will need to limit the amps on the plasma cutter.

    My first impressions are that both the welder and cutter are well built for a hobby unit. Prior to this, I have owned and used an Airco DC 150 for stick welding, and a Northern 125 (110 v) flux-core wire welder, as well as an Oxy-Acetylene set up. Welding is just a hobby activity for me; mostly for fabricating tools/jigs for the shop and for occasional repairs.

    I'm eager to test out both units further in coming months. But...so far, so good! I have really had no issues to test the service response of Eastwood, but will report back after some more use. I've not tested the spool gun, but that was an additional factor in my purchase, as I have not had the capacity to weld aluminum.
    Amazing setup for the home shop or small Fab shop! (Posted on 1/30/14)
    Review by mathew
    Price
    Value
    Quality
    I have owned this Combo for a little while now and must say the MIG 175 is comparable to the same size miller and hobarts I have used. It has plenty of power to do the work I have needed it for such as welding in c notches for frames, roll cage work etc. The Versa cut 60 has plenty of power and cuts like butter. I love that it has the pilot start feature and it makes starting the cut extremely easy. all of the components are of good quality and the torch on the plasma and gun on the MIG are top notch quality. Would like to have 2 drive wheels on the MIG wire feed but the 1 works just as good and hasn't slipped yet. All in all if you're thinking about making the purchase, Just do it! I have no regrets and I'm sure you will love it!
    great valu (Posted on 1/11/14)
    Review by Gary
    Value
    Quality
    Price
    Son in-law works at a fab shop, he was impressed. Units work as stated, good buy
    EXCELLENT PRODUCT A++ (Posted on 11/17/13)
    Review by Robert
    Quality
    Price
    Value
    Replaced a smaller 110 v. mig unit with this, can't believe the difference. Much more adjustability and control with this unit. Did a small job with the spool gun on aluminum and was very pleased. Tried out the plasma cutter just to get the feel of it and seems to be a good product. Would recommend this combo to anyone in the market, beginner or experienced welder.
    fairly good overall. (Posted on 11/12/13)
    Review by warren
    Quality
    Price
    Value
    The mig welder has a cheap looking drive system in it but has worked well for 2 weeks now and the plasma cutter has worked flawlessly so far.
    175 welder and plasma cutter (Posted on 11/5/13)
    Review by neil
    Quality
    Price
    Value
    Very good works great very good buy
    One of the best purchases I have ever made. (Posted on 10/14/13)
    Review by Dale
    Quality
    Price
    Value
    I have wanted a mig welder and plasma cutter for a long time, but just couldn't justify the expense for my hobby projects. I heard about Eastwood and did lot's of research. I saved about $2000 on the package deal compared to the majors. I did it on line. Arrived in 3 days in perfect condition. The welder worked great out of the box. I installed an airfilter, but didn't notice the plugs in the filter. Duh! So I burned up the first set of consumables. I got with a rep. on line chat. Figured out the problem, new consumables in 3 days. Worked perfect. Couldn't be happier.
    Good machines (Posted on 9/19/13)
    Review by Aaron
    Price
    Value
    Quality
    Welder works smooth and Plasma cuts good!!! Real Happy

    Items 1 to 10 of 15 total

    per page
    1. 1
    2. 2

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register