Eastwood High-Build Self-Etching Primer Gray Aerosol

    Item #14260Z

    Details

    High-Build Self-Etching Primer fills-in imperfections as it prepares bare metal for non-epoxy topcoats

    Eastwood's High-Build Self-Etching Primer Aerosol has a true acid-etching formula that sticks to virtually any clean, bare, rust-free metal. Lacquer-based, metal-etching primer improves the adhesion and durability of most non-epoxy topcoats, and its high-build capability allows you to fill-in low spots and level-out surfaces prior to topcoating.

    • Etches and primes bare metal in 1 step
    • Fills-in imperfections, sands easily
    • Strengthens adhesion, durability, and color hold-out
    • Use with non-epoxy primers and topcoats
    • 16-oz. aerosol

    About Eastwood High-Build Self-Etching Primer Gray Aerosol

    Eastwood's High Build Metal Etching primer’s true acid etching formulation sticks to virtually any clean, bare, rust free metal. This lacquer based, self etching primer enhances the adhesion and durability of most non epoxy top coats. It's high build capabilities allow you to fill in low spots and level out surfaces prior to top coating.


    Contents

    net weight 16 ounces


    Accessories

    31160 Dura Block Sanding Blocks; 10041Z PRE Painting Prep; 12786ZP Urethane Primer Quart; 50242ZP Epoxy Primer Quart; 12776 Evolution Paint Gun; 11456 Bandit Respirator; 51136 Eastwood Paint Color Chart


    Application

    Apply directly on clean bare metal that's free of waxes, grease and dirt. Use Eastwood's PRE Painting Prep to clean the surface. Apply several light coats until desired thickness and coverage is achieved. Wait 15 to 30 minutes between coats, with full cure in 48 hours, depending on conditions. For optimum results, apply at 70 degreesF at 50% humidity or less.


    Safety

    Always wear eye, skin and respiratory protection. Always apply in a well ventilated area away from open flame. Consult MSDS for specific hazards and warnings.


    Warranty

    Made in USA, 60 day warranty, 2 year shelf life


    Application

    Ensure are to be applied is clean and free of waxes, grease and dirt. Use Eastwood's PRE Painting Prep to clean the surface. Apply directly to bare metal. Apply several light coats until desired thickness and coverage is achieved. wait 15 to 30 minutes between coats, full cure in 4 8 hours depending on conditions. For optimum results, apply at 70 dgerees F at 50% humidity or less.


    Customers also viewed:

    Customer Reviews

    1 Item(s)

    per page
    Incompatible so far (Posted on 3/10/2013)
    Review by Henry
    Price
    Value
    Quality
    Incompatible so far with:

    988 Self Etching primer

    Eastwood Chassis Black

    Rustoleum Oil Based brush on black gloss

    Maybe you can tell me what to use it with.

    1 Item(s)

    per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register