Eastwood's High-Build Self-Etching Gray Primer

    Item #14260 High Build Primer


    High-Build Self-Etching Primers fill-in imperfections as they prepare bare metal for non-epoxy topcoats.

    Eastwood's High-Build Self-Etching Primers have a true acid-etching formula that sticks to virtually any clean, bare, rust-free metal. These lacquer-based, metal-etching primers improve the adhesion and durability of most non-epoxy topcoats, and their high-build capabilities allow you to fill-in low spots and level-out surfaces prior to topcoating. When you use the quart or gallon can, you'll need a 1.8-2.0mm nozzle to spray these primers.

    • Etches and primes bare metal in 1 step
    • Fills-in imperfections, sands easily
    • Strengthens adhesion, durability, and color hold-out
    • Use with non-epoxy primers and topcoats

    About Eastwood's High-Build Self-Etching Gray Primer

    Eastwood's High-Build Self-Etching Primers improve the adhesion, durability, and color hold-out of topcoats. Not only do they etch and prime in one step, but their high-build formula also fills-in imperfections.

    Due to regulations pertaining to recycling, we are unable to ship this product to Alberta, Canada.


    Aerosol – 16 ozs.
    Gallon – 128 ozs.
    Quart – 32 ozs.


    31160 Dura Block Sanding Blocks
    10041Z PRE Painting Prep
    12786ZP Urethane Primer, Quart
    50242ZP Epoxy Primer, Quart
    12776 Evolution Paint Gun
    11456 Bandit Respirator
    51136 Eastwood Paint Color Chart


    Apply directly on clean bare metal that's free of waxes, grease and dirt. Use Eastwood's PRE Painting Prep to clean the surface. Apply several light coats until desired thickness and coverage is achieved. Wait 15 to 30 minutes between coats, with full cure in 48 hours, depending on conditions. For optimum results, apply at 70 degreesF at 50% humidity or less.


    Always wear eye, skin and respiratory protection. Always apply in a well-ventilated area away from open flame. Consult MSDS for specific hazards and warnings.

    Customers also viewed:

    Customer Reviews

    1 Item(s)

    per page
    Incompatible so far (Posted on 3/10/2013)
    Review by Henry
    Incompatible so far with:

    988 Self Etching primer

    Eastwood Chassis Black

    Rustoleum Oil Based brush on black gloss

    Maybe you can tell me what to use it with.

    1 Item(s)

    per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register