TIG Spot Weld Kit

    Item #14150 Brand: Eastwood

    Quality
    Price
    Value
    2 Review(s)

    Details

    Now you can "spot weld" with your TIG welder...just add our exclusive TIG Spot Weld Nozzle to your tool box!

    Use your TIG welder together with this TIG Spot Weld Nozzle to produce professional spot welds without a large resistance welder.

    • Duplicate full-penetration OE spot welds from one side with your existing TIG welder
    • No need to buy a resistant spot welder (about $250!) or fool with carbon arc rods
    • "Leg extensions" create exact standoff distance for spot welding 20- and 18-gauge steel

    About TIG Spot Weld Kit

    Spot Welding in the past had primarily been done by large resistance welders but can now be achieved with your TIG welder and this Spot Welding Kit from Eastwood. Spot welding is accomplished by clamping two panels together and fusing them with a number of welds sequentially placed rather than a continuous bead to hold the panels together. This kit is designed to be used with Eastwood's TIG Welders as well as any other brand welder that utilizes a 17 size TIG torch.


    Contents

    This kit includes 2 TIG Spot Weld Nozzles, Spot Weld Pliers, and detailed instructions.


    Accessories

    Replacement Parts:13899 Spot Weld Pliers 14150 A Spot Weld
    Nozzle Accessories:13525 Pinch Weld Clamps, 4 Pack 12899Z Self Etching Weld
    Through Primer, Aerosol 13376 Patch Panel Kit


    Safety

    Follow all safety measures outlined in your welder’s instruction manual.Do not touch nozzle or pliers while welding.Use caution when touching pliers as they may be hot and could cause burns.Always use a minimum Shade 10 welding helmet, welding gloves, long sleeve shirt and pants.


    Customers also viewed:

    Customer Reviews

    2 Item(s)

    per page
    not able to get consistent spot welds (Posted on 8/24/13)
    Review by Rod
    Quality
    Price
    Value
    I posted my review on the replacement tips by mistake. you can read it there. Essentially I found it very hard to get good consistent spot welds from these tips. I did a pull test over about 60 welds at different Amp and times then pulled them apart. every time I got a plug, I counted a pass, if the parts just separated, a fail.
    time saving and easy to use (Posted on 4/12/13)
    Review by Ed
    Price
    Value
    Quality
    this kit produces near perfect spot welds everytime . simple to use and has a 5 minute or less learning curve (basicly setting up your amps) i was able to rap out 100 spot welds in around 10 minutes with no grinding or clean up when done . definatly a great add on to your tig welder

    2 Item(s)

    per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register