Eastwood Pure White Paint

    Item #50373 ZP Pure White Paint


    Eastwood's premium Pure White Single-Stage Acrylic Urethane Topcoat provides exceptional long-lasting beauty and durability.

    This premium 2-component topcoat system is blended with top-quality raw materials and advanced composition coatings technology. Superior to acrylic, alkyd and lacquer coatings. Eastwood's single-stage urethane paints hold their gloss longer and won't yellow.

    • 96-fl.-oz. Pure White Automotive Paint
    • 32-fl.-oz. Activator required (included in 50373)
    • Catalyzed urethane for unsurpassed durability
    • Highly resistant to UV rays, chemicals, chips

    About Eastwood Pure White Paint

    Due to regulations pertaining to recycling, we are unable to ship this product to Alberta, Canada.


    Choose from the following:
    50373ZP is the Pure White Single-Stage Urethane Topcoat, Gallon, with Activator
    50212ZP is the Pure White Topcoat, Gallon, without Activator
    21856ZP is the Eastwood Urethane Activator, 32-oz.


    Clean surfaces of all contaminants. Abrade surface to be painted with a minimum of 320-grit sandpaper, working up to a 600-grit for maximum adhesion. Re-clean surface. After shaking paint, mix 3 parts paint with 1 part activator. Use caution mixing materials as paint may begin to gel after 2 hours at 70°F. HVLP gun setting: 8-10 PSI, with a 1.4mm-1.8mm tip. This color is formulated to give complete coverage in 2-3 coats. Allow 10 minutes flash time between coats; should be tack-free in 45-60 minutes, with full cure in 18 hours.

    MSDS Sheet

    Click Here for Material Safety Data Sheet


    10194ZP PRE Painting Prep, Quart
    51605 Concours HVLP Paint Gun Kit
    51686 Concours HVLP Detail Gun
    20474 4-Stage Dry Air System
    50040ZP Master Paint Prep Kit
    51561Z 6" Liquid Ice Buffing Kit
    34053 Hobby Air Fresh-Air System
    51559 Digital Regulator
    50244ZP Epoxy Gray Primer, Gallon
    50245ZP Epoxy Primer Catalyst, Gallon
    50240ZP 2K Urethane Gray Primer, Gallon
    50241ZP 2K Urethane Primer Catalyst, Quart


    (Q) Do I need a clear?
    (A) No, but you should use a clearcoat over metallics.

    (Q) How much paint do I need?
    (A) Typically one gallon per car. If you are also painting jambs, under the hood, or the trunk, use 2 gallons. For large cars and pickup trucks, use 2 gallons. Number of coats, prep and application methods will affect the amount of paint required.

    Product Information Sheet

    Click here to view product information sheet


    Always wear proper eye, skin and respiratory protection. Always paint in a well-ventilated area away from sparks and open flame. Consult MSDS and product data sheets for proper safety precautions.

    Customers also viewed:

    Customer Reviews

    5 Item(s)

    per page
    Painted my 77 Celica GT with this (Posted on 12/5/13)
    Review by John
    I bought the paint to do my 77 Celica GT wth and although I'm not a professional it turned out pretty nice so far. It seems as though I'm left with a lot of wet sanding to get the shine to come up but when it does it looks good.
    Excellent Paint (Posted on 9/15/13)
    Review by RICHARD
    I've used $400.00 per gallon single stage Urethane paint which is no better than Eastwood paint. It lays out well and there is little need for wet sanding. Would use again.
    great product (Posted on 1/7/12)
    Review by ron
    3rd time painting a car and it turned out great. the paint was very easy to mix and spray. its a GREAT color and it has a great name as wll
    very happy (Posted on 4/30/11)
    Review by Robert
    good flow
    very very happy!!!!!!! (Posted on 4/30/11)
    Review by rob
    good flow

    5 Item(s)

    per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register