Eastwood Pro Street Red Paint

    Item #50379 ZP Pro Street Red

    Quality
    Price
    Value
    9 Review(s)

    Details

    Eastwood's premium Pro Street Red Single-Stage Acrylic Urethane Topcoat provides exceptional long-lasting beauty and durability.

    This premium 2-component topcoat system is blended with top-quality raw materials and advanced composition coatings technology. Superior to acrylic, alkyd and lacquer coatings. Eastwood's single-stage urethane paints hold their gloss longer and won't yellow.

    • 96-fl.-oz. Pro Street Red Automotive Paint
    • 32-fl.-oz. Activator required (included in 50379)
    • Catalyzed urethane for unsurpassed durability
    • Highly resistant to UV rays, chemicals, chips

    About Eastwood Pro Street Red Paint

    Not for sale or use in California. Eastwood Paints are formulated to meet National Rule VOC regulations; check with your local and state guidelines as some areas may have stricter regulations than others.

    Due to regulations pertaining to recycling, we are unable to ship this product to Alberta, Canada.


    Contents

    Choose from the following:
    50379ZP is the Pro Street Red Single-Stage Urethane Topcoat, Gallon, with Activator
    50218ZP is the Pro Street Red Topcoat, Gallon, without Activator
    21856ZP is the Eastwood Urethane Activator, 32-oz.


    Application

    Clean surfaces of all contaminants. Abrade surface to be painted with a minimum of 320-grit sandpaper, working up to a 600-grit for maximum adhesion. Re-clean surface. After shaking paint, mix 3 parts paint with 1 part activator. Use caution mixing materials as paint may begin to gel after 2 hours at 70°F. HVLP gun setting: 8-10 PSI, with a 1.4mm-1.8mm tip. This color is formulated to give complete coverage in 2-3 coats. Allow 10 minutes flash time between coats; should be tack-free in 45-60 minutes, with full cure in 18 hours.


    MSDS Sheet

    Click Here for Material Safety Data Sheet


    Accessories

    10194ZP PRE Painting Prep, Quart
    51605 Concours HVLP Paint Gun Kit
    51686 Concours HVLP Detail Gun
    20474 4-Stage Dry Air System
    50040ZP Master Paint Prep Kit
    51561Z 6" Liquid Ice Buffing Kit
    34053 Hobby Air Fresh-Air System
    51559 Digital Regulator
    50244ZP Epoxy Gray Primer, Gallon
    50245ZP Epoxy Primer Catalyst, Gallon
    50240ZP 2K Urethane Gray Primer, Gallon
    50241ZP 2K Urethane Primer Catalyst, Quart


    FAQs

    (Q) Do I need a clear?
    (A) No, but you should use a clearcoat over metallics.

    (Q) How much paint do I need?
    (A) Typically one gallon per car. If you are also painting jambs, under the hood, or the trunk, use 2 gallons. For large cars and pickup trucks, use 2 gallons. Number of coats, prep and application methods will affect the amount of paint required.


    Product Information Sheet

    Click here to view product information sheet


    Safety

    Always wear proper eye, skin and respiratory protection. Always paint in a well-ventilated area away from sparks and open flame. Consult MSDS and product data sheets for proper safety precautions.


    Customers also viewed:

    Customer Reviews

    9 Item(s)

    per page
    Great paint at a great price! (Posted on 4/4/14)
    Review by Michael
    Quality
    Price
    Value
    I used the Boulevard black and the Pro street red on my Chevelle. I also clear coated the car with Eastwoods European clear. This was the first paint job I've ever done it turned out fantastic!
    GREAT urethane, HOT color (Posted on 2/8/14)
    Review by Jimmy
    Price
    Value
    Quality
    I spent quite a bit of time chatting w the tech folks on which red to use to match the stock vinyl color on a 65 Dodge. The guy was patient and knowledgeable. I sprayed w my home compressor and Eastwood Concours gun that needed only 4 CFM. The color and quality of the finish were fantastic and this is the first time I've EVER used a spray gun other than the primer under THIS red!
    Excellent performer (Posted on 1/5/14)
    Review by Redgmc
    Price
    Value
    Quality
    This was my first attempt at painting. Once I got my gun set up right I got excellent results. I sprayed 2 coats of color and 2 clear coats, I couldn't be happier. Plus the satisfaction of doing it myself.
    great product (Posted on 1/7/12)
    Review by ron
    Quality
    Price
    Value
    3rd time painting a car and it turned out great. the paint was very easy to mix and spray. its a GREAT color and it has a great name as wll
    Poor performer (Posted on 8/27/11)
    Review by Norcodone
    Value
    Quality
    Price
    After all the prep work I did on my TBird I am terribly disappointed in the results of my paint job. The look was so dry I literally worked my fingers to the bone wet sanding to get it to gloss. Do not recommend Eastwood single stage urethane paint.
    very happy (Posted on 4/30/11)
    Review by Robert
    Value
    Quality
    Price
    good flow
    very very happy!!!!!!! (Posted on 4/30/11)
    Review by rob
    Value
    Quality
    Price
    good flow
    user friendly, excellent finish (Posted on 4/8/11)
    Review by Redvette
    Value
    Quality
    Price
    Used this to paint my '86 Corvette. Really pops!. The real concern should be with the equipment one uses. I should have upgraded to Eastwood spray equipment, but still really turned out nice. After color sanding, buffing & polishing, it's sharp!!
    Mixes easily, covers well, goes on smoothly (Posted on 9/24/10)
    Review by carnut122
    Price
    Value
    Quality
    Compared to a competitor's (who sell a lot of speed equipment) single stage urethane, this one is much more forgiving and much more user friendly! Be sure to clear coat it for added pop! love my paint job!

    9 Item(s)

    per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register