- Home
- Eastwood Royal Blue w/Activator Paint
- Product Reviews
Details
This paint must be catalyzed with the included Urethane Activator (21856ZP). For increased depth and gloss, and, easier color sanding and buffing Clearcoat with Eastwood Urethane Clear, 2:1 Gallon with 2 of (50252ZP) Eastwood Urethane Clear Coat Activator, Quart. Be sure to apply Urethane finishes over properly prepped surfaces. For best durability prime bare metal with 50244ZP Eastwood Epoxy Gray Primer Gallon mixed 1:1 with 50245ZP Eastwood Epoxy Primer Catalyst. Use the 50240ZP Eastwood 2K Urethane Gray Primer Gallon mixed 4:1 with 50241ZP Catalyst Quart to help hide minor defects.
2' x 3' Medium Wave Curing Lamp
Only
$199.99
|
RapidAir Complete Garage Air Line KitsStarting at: $6.99 |
SAS Bandit RespiratorStarting at: $12.99 |
Eastwood Concours HVLP Paint Spray Gun w/1.2 Tip
Only
$159.99
|
Eastwood Filter Separator Regulator System
Only
$244.99
|
Pure Air 2000 with Opti-Fit Respirator - Med
Only
$479.99
|
About Eastwood Royal Blue w/Activator Paint
This paint must be catalyzed with the included Urethane Activator (21856ZP). For increased depth and gloss, and, easier color sanding and buffing Clearcoat with Eastwood Urethane Clear, 2:1 Gallon with 2 of (50252ZP) Eastwood Urethane Clear Coat Activator, Quart. Be sure to apply Urethane finishes over properly prepped surfaces. For best durability prime bare metal with 50244ZP Eastwood Epoxy Gray Primer Gallon mixed 1:1 with 50245ZP Eastwood Epoxy Primer Catalyst. Use the 50240ZP Eastwood 2K Urethane Gray Primer Gallon mixed 4:1 with 50241ZP Catalyst Quart to help hide minor defects.
Clean surfaces of all contaminants. Abrade surface to be painted with a minimum of 320 grit sandpaper working up to a 600 grit for maximum adhesion. Re-clean surface. After shaking paint, mix 3 parts paint with 1 part activator Use caution mixing materials as paint may begin to gel after 2 hours at 70 degrees F. HVLP gun setting 8-10psi 1.4-1.8mm tip. Eastwood paint is designed to give complete coverage in 2 coats. Allow 10 minutes flash time between coats, should be tack free in 45-60 minutes, full cure in 18 hours
Q: Do I need a clear?
A: No, but you should use one over metallics.
Q: How much paint do I need?
A: Typically one gallon per car. If you are painting jams, under hood, under the trunk, use 2 gallons. For large cars and pick up trucks, 2 gallons. Number of coats, prep and application methods will affect the amount of paint required.
A: No, but you should use one over metallics.
Q: How much paint do I need?
A: Typically one gallon per car. If you are painting jams, under hood, under the trunk, use 2 gallons. For large cars and pick up trucks, 2 gallons. Number of coats, prep and application methods will affect the amount of paint required.
Always wear proper eye, skin and respiratory protection Always paint in a well ventilated area away from sparks & open flame Consult MSDS & Product data Sheets for proper safety precautions.
Buy online or call 1-800-343-9353
 |
 |
 |
 |
 |
 |
 |
|