Everocat Metal Glaze Ultra 30 ounces

    Item #14352ZP Brand: EverCoat

    Details

    METAL GLAZE Ultra is the world's best sanding polyester putty for use as a finishing coat over body filler, large panels, or small spot filling. Its unparalleled sanding qualities are a result of the patent pending EcoResin. Its unique thinner viscosity makes it ideally suited for intermixing with other Metalworks products to improve flowout. Formulated with ZNX 7 for improved adhesion. For use on Sanded Body filler, Steel, Galvanized Steel, E Coat, Aluminum, Rigid to Semi rigid Thermoset Plastics, SMC, Fiberglass (cosmetic repairs only), Cured sanded 2K primer surfacers, Sanded OEM paints.

    About Everocat Metal Glaze Ultra 30 ounces

    METAL GLAZE Ultra is the world’s best sanding polyester putty for use as a finishing coat over body filler, large panels, or small spot filling. Its unparalleled sanding qualities are a result of the patent pending EcoResin. Its unique thinner viscosity makes it ideally suited for intermixing with other Metalworks products to improve flowout. Formulated with ZNX 7 for improved adhesion. For use on Sanded Body filler, Steel, Galvanized Steel, E Coat, Aluminum, Rigid to Semi rigid Thermoset Plastics, SMC, Fiberglass (cosmetic repairs only), Cured sanded 2K primer surfacers, Sanded OEM paints.


    Contents

    30 fluid ounces in pump container


    Accessories

    13520ZP Contour Premium Body Filler, 13523 ZP Contour Sprayable Polyester Filler, 50240ZP Eastwood Urethane Primer, 51136 Eastwood Color Chart, 12846Z Aerosol Injected Cleaner, 13919 Body Filler Spreaders, 14292 Spraing Steel Body Filler Spreaders, 31273 Quick Mix Board


    Application

    Clean and degrease with Eastwood PRE. Use 80 to 180 grit to remove or scuff the paint and feather edge. Place the desired amount of material on a clean, non fibrous surface. Measure hardener 2% by weight Mix thoroughly until uniform color is achieved. Spread a thin layer of mixed material over surface using firm pressure. Apply additional layers if desired. Do not apply over new or uncured coatings. Avoid thick heavy applications. Finish with 180 grit, final sand with 180 grit followed by 220 to 320 grit if desired.


    Safety

    Always wear eye skin and respiratory protection when using this product. use in a well ventilated area. VOC content 1.67 LBS/Gallon


    Application

    Clean and degrease with Eastwood PRE. Use 80 to 180 grit to remove or scuff the paint and featheredge. Place the desired amount of material on a clean, non fibrous surface. Measure hardener 2% by weight Mix thoroughly until uniform color is achieved. Spread a thin layer of mixed material over surface using firm pressure. Apply additional layers if desired. Do not apply over new or uncured coatings. Avoid thick heavy applications. Finish with 180 grit, final sand with 180 grit followed by 220 to 320 grit if desired.


    Customers also viewed:

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register