Eastwood Meteor Gray Metallic Gallon Kit

    Item #12548 ZP Meteor Gray Metallic

    Quality
    Price
    Value
    6 Review(s)

    Details

    Eastwood's premium Meteor Gray Metallic Single-Stage Acrylic Urethane Topcoat provides exceptional long-lasting beauty and durability.

    This premium 2-component topcoat system is blended with top-quality raw materials and advanced composition coatings technology. Superior to acrylic, alkyd and lacquer coatings. Eastwood's single-stage urethane paints hold their gloss longer and won't yellow.

    • 96-fl.-oz. Meteor Gray Metallic Automotive Paint
    • 32-fl.-oz. Activator required (included in 12548)
    • Catalyzed urethane for unsurpassed durability
    • Highly resistant to UV rays, chemicals, chips

    About Eastwood Meteor Gray Metallic Gallon Kit

    Not for sale or use in California. Eastwood Paints are formulated to meet National Rule VOC regulations; check with your local and state guidelines as some areas may have stricter regulations than others.

    Due to regulations pertaining to recycling, we are unable to ship this product to Alberta, Canada.


    Contents

    Choose from the following:
    12548ZP is the Meteor Gray Metallic Single-Stage Urethane Topcoat, Gallon, with Activator
    50283ZP is the Meteor Gray Metallic Topcoat, Gallon, without Activator
    21856ZP is the Eastwood Urethane Activator, 32-oz.


    Application

    Clean surfaces of all contaminants. Abrade surface to be painted with a minimum of 320-grit sandpaper, working up to a 600-grit for maximum adhesion. Re-clean surface. After shaking paint, mix 3 parts paint with 1 part activator. Use caution mixing materials as paint may begin to gel after 2 hours at 70°F. HVLP gun setting: 8-10 PSI, with a 1.4mm-1.8mm tip. This color is formulated to give complete coverage in 2-3 coats. Allow 10 minutes flash time between coats; should be tack-free in 45-60 minutes, with full cure in 18 hours.


    Accessories

    10194ZP PRE Painting Prep, Quart
    51605 Concours HVLP Paint Gun Kit
    51686 Concours HVLP Detail Gun
    20474 4-Stage Dry Air System
    50040ZP Master Paint Prep Kit
    51561Z 6" Liquid Ice Buffing Kit
    34053 Hobby Air Fresh-Air System
    51559 Digital Regulator
    50244ZP Epoxy Gray Primer, Gallon
    50245ZP Epoxy Primer Catalyst, Gallon
    50240ZP 2K Urethane Gray Primer, Gallon
    50241ZP 2K Urethane Primer Catalyst, Quart


    FAQs

    (Q) Do I need a clear?
    (A) No, but you should use a clearcoat over metallics.

    (Q) How much paint do I need?
    (A) Typically one gallon per car. If you are also painting jambs, under the hood, or the trunk, use 2 gallons. For large cars and pickup trucks, use 2 gallons. Number of coats, prep and application methods will affect the amount of paint required.


    Safety

    Always wear proper eye, skin and respiratory protection. Always paint in a well-ventilated area away from sparks and open flame. Consult MSDS and product data sheets for proper safety precautions.


    Product Information Sheet

    Click here to view product information sheet


    Customers also viewed:

    Customer Reviews

    6 Item(s)

    per page
    Excellent finish (Posted on 1/13/14)
    Review by Craig
    Price
    Value
    Quality
    Repainted my wifes allow wheels and got excellent results with the Single stage Urethane. Speacial thanks to Eastwood technical support for answering all my questions. In retrospective, I should have added a couple of coats of clear so I could wetsand out some dust nibs but overall very pleased with end result. I even used a cheap gravity feed non-hvlp model and worked great!
    wow,just a little more (Posted on 4/16/13)
    Review by Mike
    Price
    Value
    Quality
    I had a problem spraying this color on my 59 belair, I purchased 2 gallons for the jambs and body, this color is rough to spray , a lot of separation going on for the color and metallic, this color is real tricky to get right, well I guess its time to sand the whole car again, I wish your gallons were truegallons because if they were my car would have been done,
    great product (Posted on 1/7/12)
    Review by ron
    Quality
    Price
    Value
    3rd time painting a car and it turned out great. the paint was very easy to mix and spray. its a GREAT color and it has a great name as wll
    color seperation (Posted on 12/31/11)
    Review by David
    Quality
    Price
    Value
    this paint sprays good but I keep getting color seperation in the paint on the vehicle.I'm using all eastwood prep for this paint before spraying.This is the second gallon of the same color that has done this.I've not had any problem with other colors just this one....Time to sand again.I've got one more gallon to try and if it does it this time I'll have to change the color of the vehicle.This is getting expensive.
    very happy (Posted on 4/30/11)
    Review by Robert
    Value
    Quality
    Price
    good flow
    very very happy!!!!!!! (Posted on 4/30/11)
    Review by rob
    Value
    Quality
    Price
    good flow

    6 Item(s)

    per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register