Eastwood Rust Encapsulator-Paint Over Rust in Black

    Item #Encapsulator 16060

    Price
    Value
    Quality
    72 Review(s)

    Details

    Stop rust in its tracks! Our Rust Encapsulator has been reformulated with TWICE the corrosion resistance!

    You thought it was good before...wait ’til you try this Rust Encapsulator! It seals and stops rust and corrosion from spreading, but it performs even better than our original formula. Tested against well-known brands, the Eastwood Rust Encapsulator has proven to be superior in sunlight resistance, preventing rust creep, and overall durability.

    • Twice the corrosion resistance of our original formula for greater durability (tested to 500 hours in a salt-spray chamber)
    • Epoxy-fortified for better adhesion and topcoat compatibility
    • Penetrates deeper to prevent rust from spreading or forming, even in hard-to-reach areas
    • Cures faster, and the low-VOC formula is acceptable in California
    • 15-oz. aerosol covers about 10 sq. ft.
    • As seen on "My Classic Car" TV show


    Due to regulations pertaining to recycling, we are unable to ship this product to Alberta, Canada.

    About Eastwood Rust Encapsulator-Paint Over Rust in Black

    Eastwood Rust Encapsulator has been tested by an independent lab to be one of the most effective rust-preventive products yet. Rust Encapsulator is a great primer for floor pans and other underbody parts. It fills tiny pin-holes and surface irregularities, and is compatible with lacquer, enamel and urethane topcoats (including Eastwood Chassis Black). For the absolute ultimate rust remedy, first brush or spray-on Eastwood Rust Converter, then prime with Rust Encapsulator. One 15-oz. aerosol covers about 10 sq. ft., and contains no isocyanates. Heat-resistant up to 400°F. Made in the USA.

    Buy 3 or more and SAVE over individual pricing!


    Application

    Use a wire brush to remove loose rust, scale and paint, and remove dust, grease and oil deposits. Wipe down with either Acetone or Pre Painting Prep (10041Z). Feather surrounding paint with 220-grit sandpaper. Shake can for at least 2 minutes once the mixing ball starts to rattle. Hold the Rust Encapsulator can 10-12" above surface as you spray. A single coat dries to the touch in 20 minutes, and is thoroughly dry in 3-4 hours at 68°F. For greater durability, a second coat can be applied 1 hour after the first. Allow 6-8 hours after the last coat before applying topcoat. Use over or under body fillers.


    Contents

    Choose from the following:
    14761Z is the Trial-Size Rust Encapsulator, Black, 2-oz. Aerosol
    16060Z is the Rust Encapsulator, Black, 15-oz. Aerosol
    26060Z is the Rust Encapsulator with Extension Nozzle, Black, 15-oz. Aerosol
    16065ZP is the Rust Encapsulator, Black, 1-quart Can
    16070ZP is the Rust Encapsulator, Black, 1-gallon Can
    Quart can is also available in a 12-pack


    FAQ's

    (Q) Can Rust Encapsulator be applied with the Undercoating System?
    (A) Technically, yes, but this application isn't recommended because Rust Encapsulator requires surface to be free of grease, oil, and loose rust. The best product to coat inside box sections is the Heavy-Duty Anti-Rust (16017ZP). This waxy, oily product flows into pinch welds and through rust to seal surfaces from contact with moisture and air, but cannot be painted over, so it's only suitable for inside box sections that don't show. Use lacquer thinner for cleanup.


    Safety

    Work in a well-ventilated area when applying this product. The use of a respirator is recommended. Shake vigorously for 2 minutes before spraying.


    Accessories

    In places where little or no surface prep can be done, our Heavy-Duty Anti-Rust (16017ZP) is actually a better choice for applying into blind areas such as box sections. Buy 3 or more quart cans and save!


    Customers also viewed:

    Customer Reviews

    Items 1 to 10 of 72 total

    per page
    1. 1
    2. 2
    3. 3
    4. 4
    5. 5
    6. ...
    7. 8
    15 yeard (Posted on 6/9/14)
    Review by Roy
    Quality
    Price
    Value
    I used this stuff 15 years ago for a 1949 Ford with a rusted frame. I put this on the frame and it looks as new today as the day I put it on. Now I'm going to use it under my travel trailer. One warning DON'T get any on you. It only wears off.
    Great Product (Posted on 6/1/14)
    Review by Greg
    Price
    Value
    Quality
    This product is very handy for small jobs. I saves getting a spray gun or paint brush. Rust Encapsulator is very durable and easy to paint over.
    EASY AS PIE (Posted on 5/26/14)
    Review by TJ
    Value
    Quality
    Price
    PROPER PREP..DEGREASE AREA, REMOVE LOOSE RUST. SHAKE THE CAN REAL GOOD TO GET AS MUCH OF THE ACTIVE INGREDIENT IN SOLUTION THEN JUST SPAY YOUR HEART OUT.. DRIES QUICKLY APPLY SECOND COAT AND YOURE DONE.. ALLOW TO CURE AND CHECK FOR LEAKS NADA..AGAIN THIS PART IS NOT SUBJECT TO PRESSURE SO KEEP THAT IN MIND..SAVED A BUNDLE-O-CASH DOING IT MYSELF..
    This Stuff Is Fantastic (Posted on 4/6/14)
    Review by TMac
    Quality
    Price
    Value
    My local body shop wanted nearly $1000 to replace my front bumper. Instead, I ordered the black rust encapsulator and planned to cover it with a bra. After some minimal sanding, I applied two coats and it looks fantastic! I have the bra, but I don't even need it. It matches my front grill, so you don't even notice it's not painted metallic grey as it was. I would not hesitate to use this on anything that rusts. I told all my friends I would want to be a distributor I believe in this stuff so much. I also told them I would help with their projects as it was easy and enjoyable to work with. It covered and and sealed like a dream. I will be buying again soon.
    WOW (Posted on 3/23/14)
    Review by chad
    Quality
    Price
    Value
    Great stuff, very good hiding capabilities, lays
    down flat and smooth. Nice spray pattern, does not run. But, pricy
    excellent product!!!!!! (Posted on 3/3/14)
    Review by Travis
    Quality
    Price
    Value
    excellent coverage out of one can, done trunk,floorboards,etc. sprays evenly,outstanding product. no primer needed. can't say enough about this product,
    Great product. (Posted on 2/25/14)
    Review by KEN
    Quality
    Price
    Value
    WOW! I've been using some of the old stuff (red) that I like because it would dry faster than POR-15. But this new encapsulator dries even faster - in just a few minutes. I don't have to stop working (stop creating dust) for 24 hours as with POR-15.
    Good product (Posted on 2/22/14)
    Review by Michael
    Quality
    Price
    Value
    treated my chevelle frame last Nov. been sitting outside in the elements, holding up VERY good. Recommend this product to anyone. wire brushed loose rust,brushed on product, went on smooth with no brush marks. Plan on using other items from eastwood if they work like this.
    Excellent product (Posted on 2/4/14)
    Review by Don
    Price
    Value
    Quality
    I prefer this over POR-15 does the same thing !
    Incredible paint (Posted on 1/1/14)
    Review by jackman
    Price
    Value
    Quality
    Let me just say this stuff is beyond belief. Don't even consider buying spray paint at your local store. This stuff is less expensive and works 300 percent better. I'm Amazed. Going to save me a ton of money and time on my restore.

    Items 1 to 10 of 72 total

    per page
    1. 1
    2. 2
    3. 3
    4. 4
    5. 5
    6. ...
    7. 8

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register