Eastwood Textured Rust Encapsulator Black Aerosol 15oz

    Item #14741Z Brand: Eastwood


    Stop—and hide—rust in its tracks! Our "Textured" Rust Encapsulator stops surface rust, and hides it too!

    Like our regular Rust Encapsulators, this textured formula seals and stops rust and corrosion from spreading, but it does more—apply it over rusted and surrounding clean metal and it turns it all into a textured surface that hides the rust!

    Tested against well-known brands, the family of Eastwood Rust Encapsulators has proven to be superior in sunlight resistance, preventing rust creep, and overall durability. Twice the corrosion resistance of our original formula for greater durability (tested to 500 hours in a salt-spray chamber).

    • Textured formula hides the rust
    • Epoxy-fortified for better adhesion and topcoat compatibility
    • Penetrates deeper to prevent rust from spreading or forming, even in hard-to-reach areas
    • 15-oz. aerosol covers about 10-15 sq. ft.
    • As seen on "My Classic Car" TV show

    About Eastwood Textured Rust Encapsulator Black Aerosol 15oz

    Our latest "Textured Finish" Rust Encapsulator formula can be applied over rusted and clean metal to hide spotty surface rust by giving the whole area a textured finish! Eastwood's Rust Encapsulators have been tested by an independent lab to be among the most effective rust-preventive products yet. Rust Encapsulator is a great primer for floor pans and other underbody parts. It fills tiny pin-holes and surface irregularities, and is compatible with lacquer, enamel and urethane topcoats (including Eastwood Chassis Black). For the absolute ultimate rust remedy, first brush or spray-on Eastwood Rust Converter, then prime with Rust Encapsulator. One 15-oz. aerosol covers about 10-15 sq. ft., and contains no isocyanates. Heat-resistant up to 400 degreesF. Made in the USA.


    15-oz. aerosol can of Textured Rust Encapsulator


    PRE Painting Prep 10041Z, Rust Converter 51483Z, Internal Frame Coating 12515Z, respirator 11456


    Use a wire brush to remove loose rust, scale and paint, and remove dust, grease and oil deposits. Feather surrounding paint with 220-grit sandpaper. Shake can for at least 2 minutes once the mixing ball starts to rattle. Hold the Textured Rust Encapsulator can 10"-12" above surface as you spray. A single coat dries to the touch in 20 minutes, and is thoroughly dry in 3-4 hours at 68 degreesF. For greater durability, a second coat can be applied 1 hour after the first. Allow 6-8 hours after the last coat before applying topcoat. Use over or under body fillers.


    Work in a well-ventilated area when applying this product. The use of a respirator is recommended. Shake vigorously for 2 minutes before spraying. Consult MSDS for specific safety warnings.


    Made in USA

    Customers also viewed:

    Customer Reviews

    3 Item(s)

    per page
    Textured Rust Encapsulator (Posted on 7/16/2014)
    Review by Patrick
    I have a '98 Jeep TJ with a horrendous amount of frame rust that had to have Safe-T Cap work done to pass inspection (those are great too BTW). Anyhoo, I used this to convert/encapsulate rust and it was the easiest and most effective product I've ever used. If you have lots of rust and hate noxious chemicals, brushes, and black messy goop, buy this and don't look back. Cheers Eastwood! This product ROCKS!
    Nice product to use. (Posted on 5/18/2014)
    Review by Randy
    Thoroughly cleaned wheel wells, then appiled the rust converter. Last used the Textured Rust Encapsulator which went on very easily. Pant mask is a good idea!. Took about a can per wheel well. Results were show quality, and I'm no painter!
    Recommended (Posted on 12/4/2013)
    Review by Richard
    Product appears to be good. covers good and dries fast. Easy to paint over.

    3 Item(s)

    per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register