Contour Light Weight Micro-Strand Body Filler 3L

    Item #14756ZP Brand: Eastwood

    Details

    Eastwood's Contour Micro-Strand Filler is a multi-purpose, high-strength, micro-fiber-reinforced filler designed to repair rusted-out spots, holes, tears and cracks on fiberglass, regular and galvanized steel, aluminum and SMC. This waterproof formulation also provides excellent feather edging and sanding properties. Can be used with or without fiberglass matting. Cream hardener included.

    About Contour Light Weight Micro-Strand Body Filler 3L

    Eastwood's Contour short strand filler is a multi purpose, high strength short fiber reinforced filler designed to repair rusted out spots, holes, tears and cracks on fibreglass, regular and galvanized steel, aluminum and SMC. This waterproof formulation also provides excellent featheredging and sanding properties. Can be used with or without fiberglass matting. Cream hardener included.


    Contents

    .8 US Gallon, 3 Liters


    Accessories

    13521 ZP EW Contour Glazing Putty10041Z PRE Painting Prep13919 Eastwood Filler Spreaders31273 Eastwood Filler Mixing Board31160 Dura Block Sanding Boards21538 Larry Lyles Body Work DVD43579 DA Orbiting Sander14292 Spring steel body spreaders


    Safety

    Always wear eye, skin and respiratory protection when using this productalways apply in a well ventilated area.consult MSDS and product label for specific safety warnings


    Warranty

    made in Canada, 90 day defect warranty


    Application

    Surface must be free of grease and dirt, use PRE Painting Prep . Abrade metal surfaces using 36 grit, fibreglass with 180 grit. For maximum adhesion, apply directly to bare metal. 6. Mix the desired quantity of product with hardener. Apply mixed product using a clean spreader. Avoid filling depth greater than 1/4 inch. Allow to cure thoroughly, at least 20 minutes before sanding. Sand with 24 to 36 grit to achieve desired contour. If required, continue with quality body filler or glazing putty until desired smoothness is achieved. Topcoat with a premium quality primer, such as Eastwood's Epoxy or Urethane


    Customers also viewed:

    Customer Reviews

    1 Item(s)

    per page
    Strong and easy to sand (Posted on 3/9/2014)
    Review by Claude
    Quality
    Price
    Value
    It is very easy to mix, spread and sand (80 grits). It is also very strong. I also tested directly on a fiberglass mat and got a very good solid result.

    1 Item(s)

    per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register