Eastwood's 2K AeroSpray™ Ceramic Chassis Black

    Item #14145Z 2K AeroSpray Chassis Paint

    Price
    Value
    Quality
    17 Review(s)

    Details

    Eastwood's 2K Ceramic Chassis Black Aerosol allows you to paint with the durability and precision of a two-component coating without the paint gun! Formulated with Eastwood's proprietary nano ceramic technology to provide a long-lasting and durable finish, while keeping its beautiful finish for years. The innovative nozzle and valve technology, combined with its two internal chambers, ensure the right ratio is mixed every time. Sprays like a gun with a broader spray pattern than conventional aerosols and no mess to clean up. You'll achieve professional results from an easy-to-spray aerosol. Available in satin or gloss.

    About Eastwood's 2K AeroSpray™ Ceramic Chassis Black

    Eastwood's 2K Ceramic Chassis Black Aerosol allows you to paint with the durability and precision of a two-component coating without the paint gun! Formulated with Eastwood's proprietary nano ceramic technology to provide a long-lasting and durable finish, while keeping its beautiful finish for years. The innovative nozzle and valve technology, combined with its two internal chambers, ensure the right ratio is mixed every time. Sprays like a gun with a broader spray pattern than conventional aerosols and no mess to clean up. You'll achieve professional results from an easy-to-spray aerosol.
    Due to regulations pertaining to recycling, we are unable to ship this product to Alberta, Canada.


    Contents

    Choose from the following:
    14146Z is Eastwood's 2K AeroSpray™ Ceramic Chassis Black, Satin
    14145Z is Eastwood's 2K AeroSpray™ Ceramic Chassis Black, Gloss


    Accessories

    10041Z PRE Painting Prep
    12196Z Chassis Kleen
    1449Z 2K Epoxy Primer
    16060Z Rust Encapsulator
    51483Z Rust Converter
    12846Z Aerosol Injected Cleaner
    11456 Respirator


    Application

    Before activating, shake aerosol vigorously for 2 minutes. Take red button from cap. Turn aerosol 180 degrees and attach button to pin on aerosol bottom. Place aerosol on firm ground upside down. Press red button with the ball of your hand until stop is reached. After activating, shake aerosol again vigorously for 2 minutes. Pot life is 48 up to 72 hours 68 degrees F.


    Safety

    Always wear eye, skin and respiratory protection when using this product. Product contains Isocyanates; wear NIOSH-approved breathing equipment. Always use in a well-ventilated area away from open flame. Consult MSDS for specific safety warnings.


    Product Info Sheet

    Click Here for product info sheets


    Customers also viewed:

    Customer Reviews

    Items 1 to 10 of 17 total

    per page
    1. 1
    2. 2
    junk (Posted on 2/22/14)
    Review by brett
    Quality
    Price
    Value
    way to much money for what you get , sent you a e-mail , abouit this stuff right after i used it , worked good for about 3 seconds than sputtered for a while and than it would go to a stream , couldnt get 2 motor mounts painted for $25.00 i just threw it away , i have another couple of cans i would have sent back but my ups station that i have to send paint from isnt open when im not working , never again it sucks
    can stoped sprayin after half full (Posted on 2/2/14)
    Review by jacob
    Price
    Value
    Quality
    the nozzle got stopped up after half full I used this for only the first 4 hours for the price its not worth it I wish east wood would atleast send me a new can
    paint can stop sprayin after only useing half the can (Posted on 2/2/14)
    Review by jacob
    Price
    Value
    Quality
    I used the 2k gloss black on my rear axle everything went ok until I got about half the can used and then the tip and nozzle stop sprayin and I tried cleaning it but it didnt not work so I wasted 25 dollar can of spray paint I wish eastwood would atleast send me a free can free of charge and it says on the can it has to be used within 48 hours well I used it within 4 hours the 2 k paint isn't worth 25 bucks
    Awesome results; easy to work with! (Posted on 12/4/13)
    Review by Larry
    Quality
    Price
    Value
    We painted my entire front engine compartment and frame from firewall forward. I'm very impressed with the results. The paint covered very well, but we had no idea how much to order for the job. I recommend 3 - 4 cans of the primer and 5 cans of Chassis black satin paint. Ended up using seven cans of paint in the end. We didn't have enough to cover the entire engine compartment the first time. However, we wet sanded the entire front end with 400 grit paper and applied 4 cans of Chassis black satin paint. We did not need as much due to being black from the last attempt. The final results was just about perfect. The car I'm working on is a 1969 Mustang. I can't wait to install my new engine. It's going to look like eye candy.
    GOOD PRODUCT (Posted on 11/27/13)
    Review by MIGUEL
    Quality
    Price
    Value
    i think eastwood really hit it out the park with this one i love how this paint looks and the way it sprays just like a paint gun, the only thing i would reccomend eastwood to change is maybe make a bigger can because the coverage is not that great if not a bigger can maybe lower the price
    Easy to work with (Posted on 11/15/13)
    Review by DANIEL
    Quality
    Price
    Value
    Following instructions on the can. Mixed well, excellent coverage. Finish was great. I used it to cover a Jeep frame. Love the results.. so far
    Love this product.... (Posted on 11/14/13)
    Review by Jarod
    Quality
    Price
    Value
    I've repainted the a motorcycle frame and a bumper on my truck with this. Very durable and goes on smooth. Looks very professional. Great product!
    Eastwood 2K Aero-Spray (Posted on 10/2/13)
    Review by David
    Quality
    Price
    Value
    I found this product to work very well. Easy to use thanks to the simple instructions with fantastic results. I used to spray a 36 Chevy metal spare tire cover and it looks excellent. Can does go fast, it took about 95% of the can but boy does it look excellent. I will definitly use again. Excellent product!
    Good but pricey (Posted on 7/6/13)
    Review by Jerrari
    Quality
    Price
    Value
    Used this product on a non-automobile related project with good results. Down side is limited - one can only covered about 16 square feet with two coats. Upside tip. After activation I found that one could extend the life of the product in the can by almost a week if placed in the refrigerator
    Great paint! (Posted on 6/24/13)
    Review by Bob
    Price
    Value
    Quality
    Yes its a little pricey but hey you get what you pay for! This paint looks and works great. I can never go back to the cheaper stuff after using 2K. I think my car is worth it!

    Items 1 to 10 of 17 total

    per page
    1. 1
    2. 2

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register