Details
Pipe & Tubing Notcher secures up to 2"-dia. round tubing to notch angles of up to 60 degrees
Use our Pipe Notcher with any handheld drill or drill press to notch pipes and tubing for easy joining. Create any angle saddle notch on pipe for weld fit-up.
- Use a standard hole saw up to 2-1/2" in dia. (not included)
- Notches up to a 2"-dia. round tube
- Notches up to a 2" x 2-1/2" rectangular tube
Hole Saw Set (5) pc
Only
$29.99
|
Drill Press V Block Fixture Center It
Only
$15.99
|
About Eastwood Tubing and Pipe Notcher holds up to 2"-dia round tubing
The Pipe/Tubing Notcher can be used with any hand-held drill or drill press, together with a standard hole saw (not included) up to 2-1/2" diameter. Compound angle adjustment up to 60 degree.Color may vary.
Customer Reviews
5 Item(s)
per page
-
Your better off getting a JD Square notcher
(Posted on 7/7/12)
Review by Daddykingpin -
The main thing I noticed once I used the Eastwood notcher is that the guide for the blade is not steady. There is no bearing or stability and has play In the shaft, so u get a cut that is slightly off.Quality Price Value -
Perfect for the money...
(Posted on 2/1/12)
Review by reloader220 -
I have built several mini chopper frames using this notcher without any problems at all.I have also used it for some railings and other projects for a local buisness and i havent had any trouble at all..A little common sense can go a long way..Price Value Quality -
not a bad buy
(Posted on 10/24/11)
Review by dnfab -
i bought this notcher and the first time i used it the adapter stripped out... bummer, so i called eastwood and they sent me a replacement in an orderly fashion and have had minimal issues since. not a bad tool, i actually solid welded mine in the position i will be using it most and put it on my welding table. very happy with this tool. thank you eastwood for your customer service in standing behind your product. not very many like that anymore.Value Quality Price -
Doesn't do the job it's suppose to...
(Posted on 4/16/11)
Review by NrlyWrx -
This unit would be ok if it actually worked...Value Quality Price
Even though it says you can cut pipe up to 60 degrees, you can NOT.
Even on only 1/2" pipe you can not cut past 30%.
The design is a joke.
If you try to go past 30 degrees even on 1/2" pipe, it hits hold saw and you can not notch pipe.
To ad insult to injury, it looked like old stock that had been kept on the self for the past 15 years.
I like Eastwood, yet they really dropped the ball on this one! -
OK
(Posted on 8/14/10)
Review by Kustom Kolors -
For the money, this is a nice addition to the shop...The problem was with the manufacturing of the product. When putting the thing together, parts didnt fit as they should have...MASS PRODUCED,,,had to fab a tab to make the upright parts fit the base. After i spent a good 1.5 hours, the product was Ok... NOW its on sale! of course I paid full price a couple weeks ago...Value Quality Price
5 Item(s)
per page
Buy online or call 1-800-343-9353
 |
 |
 |
 |
 |
 |
 |
|