Eastwood Reptile Red wo/Activator

    Item #50213ZP

    Not for sale or use in California. Eastwood Paints are formulated to meet National Rule VOC regulations, check with your local and state guidelines as some areas may have stricter regulations than others.

    Details

    Eastwood Reptile Red is a premium true acrylic urethane topcoat that provides exceptional long-lasting beauty and durability. This premium two component topcoat system is blended with top-quality raw materials and advanced composition coatings technology. Superior to acrylic, alkyd and laquer coatings, a catalized urethane system offers unsurpassed durability and resistance to UV exposure, chemicals and annoying stone chips. Eastwood's line of paints will hold their gloss longer and won't yellow. 96 Fl. Oz 3:1 Single stage Topcoat system, requires 21856ZP activator.

    Click Here for more info on Eastwood Premium Automotive Paint Finishes

    About Eastwood Reptile Red wo/Activator

    Eastwood Reptile Red is a premium true acrylic urethane topcoat that provides exceptional long-lasting beauty and durability. This premium two component topcoat system is blended with top-quality raw materials and advanced composition coatings technology. Superior to acrylic, alkyd and laquer coatings, a catalized urethane system offers unsurpassed durability and resistance to UV exposure, chemicals and annoying stone chips. Eastwood's line of paints will hold their gloss longer and won't yellow. 96 Fl. Oz 3:1 Single stage Topcoat system, requires 21856ZP activator


    Product Information

    Download product information sheet PDF
    Urethane Paint - Safety & Application Instructions


    Accessories

    21856 ZP activator required. 50250 ZP Urethane Clear and 50251 ZP Activator 50240 ZP Urethane primer and 50241 ZP Activator 12817 Paint accessory kit, 19830 Respirator, 20406 coveralls 12454Z Block sanding kit, 20491 3-gun set 20472 Air managemnet system


    Application

    Clean surfaces of all contaminants. Abrade surface to be painted with a minimum of 320 grit sandpaper working up to a 600 grit for maximum adhesion. Re-clean surface. After shaking paint, mix 3 parts paint with 1 part activator. Use caution mixing materials as paint may begin to gel after 2 hours at 70ø. HVLP gun setting 8-10psi 1.4-1.8mm tip. This color is designed to give complete coverage in 2-3 coats. Allow 10 minutes flash time between coats, should be tack free in 45-60 minutes, full cure in 18 hours.


    MSDS Sheet

    Click Here for Material Safety Data Sheet


    Application

    Clean surfaces of all contaminants. Abrade surface to be painted with a minimum of 320 grit sandpaper working up to a 600 grit for maximum adhesion. Re-clean surface. After shaking paint, mix 3 parts paint with 1 part activator. Use caution mixing materials as paint may begin to gel after 2 hours at 70Ö. HVLP gun setting 8-10psi 1.4-1.8mm tip. This color is designed to give complete coverage in 2-3 coats. Allow 10 minutes flash time between coats, should be tack free in 45-60 minutes, full cure in 18 hours.


    Customers also viewed:

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register