Spray Max Rapid Cut-in Spot Clearcoat aerosol

    Item #50773Z Brand: Spray Max

    Price
    Value
    Quality
    2 Review(s)

    Details

    2K patented aerosol allows you to paint with a two component paint with no mixing! Spray Max's innovative nozzle and valve technology, combined with its two internal chambers ensure the right ratio is mixed every time. Sprays like a gun, broader spray pattern than conventional aerosols and no mess to clean up. You'll get professional results from an aerosol. Pot life 24 hours. Rapid cut in spot clear can be applied over any base coat, dry time 1-2 hrs. Smooth flow, long-lasting high gloss. Excellent chemical, weather and fuel resistance. 11.8 oz net weight. Made in Germany

    About Spray Max Rapid Cut-in Spot Clearcoat aerosol

    2K patented aerosol allows you to paint with a two component paint with no mixing! Spray Max's innovative nozzle and valve technology, combined with its two internal chambers ensure the right ratio is mixed every time. Sprays like a gun, broader spray pattern than conventional aerosols and no mess to clean up. You'll get professional results from an aerosol. Potlife 24 hours. Rapid cut in spot clear can be applied over any base coat, dry time 1-2 hrs. Smooth flow, long-lasting high gloss. Excellent chemical, weather and fuel resistance. 11.8 oz net weight. Made in Germany


    Product Information Sheet

    Click here to view product information sheet


    Customer Reviews

    2 Item(s)

    per page
    Perfect for small motorcycle parts (Posted on 11/6/10)
    Review by adidasbikerguy
    Price
    Value
    Quality
    I needed a good clear coat to give motorcycle parts that deep clear finish - especially when coating plastic fairing pieces. Plastic fairings and covers have decorative taping and pin striping. I wanted to touch up then apply a heavy glossy coating to protect the parts. This is the only product I found that works (short of a full out spray setup). Usually I do a couple small pieces at a time. This quantity is perfect to do a few side covers and fenders. Excellent product!
    The best clear from a can (Posted on 7/24/10)
    Review by A.P.
    Value
    Quality
    Price
    This is about the best clear you will ever get out of a can. It really is an automotive finish in a can. The good news is that it is easy to apply and flows really well. The bad news is that once you activate the hardener, (built into the can) you only have about 12 hours to use the contents.

    The can says 24 hours, which is true, but I found that my second coat shot 22 hours after activation, came out of the can blotchy and wouldn't flow the same as the coat the day before. This left me with a lot of finish work.

    The can should say 12 hours, but I was happy. One of the things I liked about it was you can really finish this stuff with wet sanding and finishing compound. I would use it again. Just be sure you have everything ready to go before activating and make sure you get enough coverage. You can sand out the drips, but if you don't have enough coverage and you sand through it to the color coat after 12 hours of activation time, you will have to buy another can and this stuff isn't cheap,

    2 Item(s)

    per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register