Eastwood 100 lb.Soda Blaster Starter Kit with Media

    Item #50499 Brand: Eastwood

    Heavyweight- Special shipping charges may apply.


    100-lb.-capacity Soda/Abrasive Blaster removes paint and rust safely, strips without chemicals...and includes 50 lbs. of soda to get you started This 2-in-1 soda blaster is the smart choice when you need to remove paint and rust without harming sheet metal, glass, or chrome...converts in minutes to abrasives when your project needs more aggressive blasting. Start blasting with the 50-lb. bag of Automotive XL Bicarbonate Soda Media included!
    • 100-lb.-capacity, top-loading hopper lets you blast longer between refills
    • Includes 50 lbs. of Automotive XL Bicarbonate Soda Media (11807)
    • Requires as little as 10 cfm at 90 psi
    • 8' blast hose with deadman valve gives you optimal control
    • All-steel, welded, top-loading hopper and pressure gauge
    • Unbeatable price for a soda blaster with this capacity!

    About Eastwood 100 lb.Soda Blaster Starter Kit with Media

    Soda blasting removes paint without harming sheet metal, glass, or chrome, and while expensive commercial soda blasters use high air volume, this affordable Eastwood soda blaster requires just 10 cfm at 90 psi. This soda blaster provides a big 100-lb. capacity at an affordable price... includes a generous 8' blast hose with deadman valve; all-steel welded, top-loading hopper; pressure gauge. Rolls easily to job site on two wheels. Readily converts between soda and aggressive abrasive blasting with included parts. Imported. Patent pending.

    More Uses for Bicarbonate Soda (Baking Soda) Blasters: You can also use bicarbonate soda blast media (NOT household baking soda) to remove graffiti and grime from brick, concrete, limestone, granite and other surfaces. Other uses included cleaning of delicate substrates; architectural and industrial cleaning; paint stripping; corrosion removal. Use to remove mold and mildew stains from pools, cement, brick, tile, granite, sound stucco, siding and more. Safely strip paint from aircraft aluminum, trucks, motorcycles. Bicarbonate soda also allows heavy-duty removal of oils and grease from engines and floors.

    Final product imported.

    Click Here to learn more about soda blasting.


    100-lb.-capacity soda blaster comes completely "ready to use", except for your compressor and air-fitting coupler to match your air lines. Includes 50 lbs. of Automotive XL Bicarbonate Soda Media (11807) to get you started.

    Simple bolt-together construction will have you blasting in about 45 minutes. Approximately 36" high with handles, and about 24" in diameter, so it will easily store in the corner of your shop or garage.



    11806 Automotive (Medium) Bicarbonate Soda Media
    11807 Automotive (XL) Bicarbonate Soda Media
    50494 Rust Remover Bicarbonate Soda with 20% Aluminum Oxide
    12111 Replacement 2.5mm-I.D. Nozzles, 3-pack
    50417 Galvanized Abrasive Media Funnel Strainer
    50097 Soda-Blasting Protection Kit


    (Q) Why use bicarbonate soda media?
    (A) Soda will not harm glass, plastics, fiberglass or chrome surfaces. It's used to remove paint coatings from the vehicle surface without etching the surface or warping the metal like more aggressive media would. It's the best way to strip fiberglass Corvettes, boats or aftermarket hoods. Also used to remove paint from urethane and SMC-type bumper fascias.

    (Q) Can this unit be used with more aggressive media?
    (A) Yes, this unit can be converted to blast standard abrasive medias such as crushed glass, aluminum oxide, etc. by using the abrasive kit included.


    Bicarbonate soda blasting is much safer than traditional abrasives, and more gentle to the metal or substrate you're blasting. However, you must still protect yourself from the dust and, more importantly, the particles of paint, corrosion or scale that become airborne during the blasting operation.

    Use a properly fitted dust mask or respirator, safety glass or safety shield, plus heavy gloves, long pants and a long-sleeve shirt to protect exposed skin. Use our 50097 Soda-Blasting Protection Kit for complete protection.

    Do not aim the nozzle anywhere other than the substrate you are blasting.

    Make sure you disconnect the air line and allow the tank to bleed pressure before opening the fill cap.

    Check the condition of the nozzle after every hour of blasting and replace once wear is visible or the blast stream becomes ineffective.

    Before each use, inspect the tank for any signs of corrosion. Make sure the rubber hoses are not dry-rotted, cracked, split or show any other signs of wear or abrasion from use or storage. Do not use the unit until damage components are repaired. Call Eastwood at 800-544-5118 for replacement components.

    Make sure the deadman valve is operating properly by depressing the valve lever and releasing; it must close over the nozzle under its own spring pressure. If not, do not use the deadman valve until the spring or obstruction is repaired.

    Only use fresh Eastwood-brand Bicarbonate Soda Media to assure trouble-free blasting and quick paint removal.


    1-year mfr's. warranty against defects.

    Designed, engineered and tested to Eastwood's specifications.

    Final product imported.

    Customers also viewed:

    Customer Reviews

    8 Item(s)

    per page
    this is junk (Posted on 6/22/2013)
    Review by kyle
    Well were do I start. Every corner that could be cut was. First the tank. It is the same tank I can get from harbor freight for 20 bucks. Then the low quality hardware that was short washers. It needs 50% more not one per bolt but one on each side.they also need to be larger in dia.. Wheels that don't even want to roll on tarmack(to small dia.) The hoses are so short you might as well as tie it to your leg. The hose clamps are total junk that just literly clamps. Auto ind ditched this style in the 60"s. No matter how low I put the pressure to the tank it clogs via presure. I have my filter on the tank used new bag of eastwood soda. Then the sifter they supply doesn't fit the generic funnel supplied so you waste soda w' spillage. I SHOULD HAVE KNOWN BETTER when the conversion kit I got was so crappy that the passages on the gun weren't aliened and made that useless. Not to get this. It does work when I gigle the tank as I spray or have another stand and do it. If they spent the time and really tested this. I know my 60 gal tank is to large and it should be set to 60 psi??? I'd say save your money and just pay some one to blast it for you w real equipment not some cheap labeled china product.
    Blaster work ok (Posted on 7/30/2012)
    Review by My 49
    It took about 30 min to set up. After I filled it with recycled glass I started to blast and it plugged up. I took it apart and got it unplugged, and when I went to put the hoses on, the garbage clamps were a pain in the you know what. Blasted for about 15 minutes and the hose blew a hole in it. Fixed it, swore at the clamps some more and started blasting again. About an hour later, the hose blew another hole, fixed it, this time threw the clamps away and used ones of better quality, not made in China. After a day of blasting, the hose blew two more times but all in all, the blaster worked ok. Eastwood needs to get better quality clamps and hoses on the blasters and I felt the hose blew far too many times.
    Works as Advertised (Posted on 7/9/2012)
    Review by Brett
    Blaster came without wheel axel but customer support 2 day FedEx'd it. After receiving and assembling it noticed that soda conversion kit valve handle was broken off. The broken part was not in the envelope containing the kit, so that means someone didn't care that they were sending a shoddy product. Still functional so I trudged on and began blasting 30 minutes after assembly.

    All I can say is thanks for putting this together for the home hobbyist. The blaster works great. Don't expect it to remove bondo or rust, the XL formula removes paint only, but does a bang-up job of it without harming other surfaces. Zero warping, zero etching. I plan on converting it back to an abrasive blaster to tackle the rusty parts at a later date.
    Expect to go through a lot of powder, it will take about 10 bags for an average car.
    Works great (Posted on 9/29/2010)
    Review by Sam
    Worked great right out of the box.Assembly was not bad about 1/2 hour to re-plumb the hoses.Spent 4 hrs. blasting the day i got it together.Great blaster for the price,gets the job done!
    Good unit, poor documentation (Posted on 9/10/2010)
    Review by Bob D
    The unit took about 20 minutes to unpack assemble. A lot of the subassemblies were already put together, which saved some time. I was up and running right away, and it did a nice job right out of the box. The only complaint is that the accessories that come with the kit aren't documented at all, so switching from soda to other media will be a guessing game.
    Good Deal (Posted on 6/29/2010)
    Review by bikesrususa
    I am satisfied with the Soda Blaster. It is a decent starter kit. It would help to have a compressor that can keep up with the workload. The Blaster actually comes as an abrasive unit, Eastwood included a converter valve to use as a Soda Blaster. The soda converter must be switched back to the original valve to use abrasives, kind of a hassle but you do have the option. I say" BUY".
    Good quality, moderate performance (Posted on 1/10/2010)
    Review by BlackBelair
    This is a well made great quality product. I've used an abrasive blaster for years of similar design. This unit is much higher quality than what I'm used to using. However, I was somewhat disappointed with the capability of the soda to remove paint. I used the product that is rated to be most aggressive in removing paint, I believe it has an XL designation and is supposed to contain the most abrassive soda material. I used the product on a steering column to remove paint from the steering column on my 55 Chevy. It was painstakingly slow in removing paint. Where it did remove the paint, the metal was completely undamaged with no marks on the clean metal, which was great. I finally resorted to using my abrassive blaster using aluminunm oxide to remove most of the paint.
    Don't be afraid to try (Posted on 7/17/2009)
    Review by Craig
    I am a novice, corrently restoring a 29 ford. I tried the sodablaster, and after watching the video, did very well. Seeing it in use, even got the wife invloved, and now she uses it to help. WARNING.. It is addictive, and you will find that you will be blasting old tools, lawn furniture, etc.

    8 Item(s)

    per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register