Original Hotcoat Powder Coating Gun

    Item #10198 Brand: Eastwood

    Details

    The Original HotCoat Powder-Coating Gun brings the benefits of powder coating right to your home garage or shop This innovative, inexpensive powder-coat gun helps you do a professional-looking powder coating job right at home. All you need to add are a compressed air source (5-10psi) from a portable tank with a regulator or a compressor), a dedicated electric oven or toaster oven, and powder colors.
    • Coat and cure in under an hour!
    • Easy to apply
    • Extremely durable finish
    • Quick color changes
    • 11,000-volt output
    • Economical

    About Original Hotcoat Powder Coating Gun

    Why powder coat? Because it gives you one of the most economical, color-durable, and longest-lasting finishes available. You'll find powder-coated surfaces are far more resistant to chipping, scratches, fading, and wear than other finishes, and the color selection is virtually unlimited, with high and low gloss, metallic, and clear finishes available. And thanks to the UV resistance of many of the powders, colors stay bright and vibrant longer. Texture selections range from smooth surfaces to a wrinkled or matte finish, plus rough textures designed for hiding surface imperfections.

    One 8-oz. bottle of powder (not included) covers the same area as 2-3 cans of spray paint, and clean-up is easy, since you can simply sweep-up the oversprayed powder. Contains no environmentally harmful solvents. HotCoat powder coating requires a 5-10psi compressed air source and dedicated electric oven (or toaster oven). Imported.


    Contents

    Original HotCoat Gun with power source, instructions, FREE powder color chip chart


    Accessories

    10021ZP Metal-2-Metal Surface Filler
    10078 High-Temp Silicone Plugs, 30 pcs.
    10027 High-Temp Masking Tape
    43045 Stainless Steel .041" Safety Wire
    10128 HotCoat High-Performance Deflector


    Application

    Power unit supplies over 9000v DC at 15 micro amps. Plugs into grounded 110-120v AC outlet. Gun requires as little as 0.5 cfm at 5-10 psi. The 50061 Eastwood Air Brush Compressor works well. Fill cup no more than 1/4 to 1/3 full, and wave the nozzle in a circular motion about 4-6" from the surface best results. Do not apply powder into a small boxed area.


    FAQs

    (Q) How long does the baking process take?
    (A) For improved flow out (less "orange peel"), bake coated parts at 500 degrees F until powder flows out (about 3-4 minutes for light sheet metal parts), then turn down the heat to 400 degrees F for a full 15 minutes.

    (Q) How can I improve transfer efficiency?
    (A) The 10128 HotCoat High-Performance Deflector greatly improves transfer efficiency. Use the Standard Deflector for getting powder in recessed areas.


    Safety / Instructions

    Use Disposable Dust Mask (22055) when handling or applying powder. Powder,like common flour, suspended in the air in high concentrations can be explosive. To minimize any explosion risk - sweep up, do not vacuum powder from the floor. Cure powder in a well ventilated area. The urethane powders we sell liberate a very minute amount of isocyanates when the powder flows out.This usually occurs about 3-5 minutes after the part is placed in the oven to bake. Wear a respirator, like our SAS Bandit Respirator (11455 or 11456), cartridges when curing or inspecting flow out progress.

    Click here for product instructions


    Customers also viewed:

    Customer Reviews

    Items 21 to 30 of 31 total

    per page
    1. 1
    2. 2
    3. 3
    4. 4
    Better then most... (Posted on 2/2/2011)
    Review by Bubba @ Snapworks Studio
    Quality
    Price
    Value
    After using several guns, including Chicago Elec, this unit seems to be the best of the low end guns. Over the last 4 years I am on my third and last gun.

    BE VERY CAREFUL!!!! Do not drop this gun as it will break just in front of where the air gun inserts into the tube!!! This happened to two of my guns... tried to glue, epoxy and even taped (which seemed to work for a bit).

    When I questioned about the ease breaking, I was told, "be more careful" by the counter person. Not a problem... I have not purchased anything but powder in two years because of it...

    With that said... the unit performs great. I have used it more often then my Wagner for small items and batches... Super easy to clean and use... though I would prefer a foot switch instead of the hand button... Great price, just "be more careful" and don't drop it.



    My fav tool is my Eastwood pc gun! (Posted on 1/28/2011)
    Review by RM Indy
    Price
    Value
    Quality
    Got this gun over 3yrs ago & its caused my ground up resto/upgrade of my 96 Dodge Ram to slow to a crawl! First 2yrs just used biggest toaster oven I could find for curing. Last year got 220v to my garage, 80gal/14.5cfm compressor, blast cabinet & a used kitchen oven. What wouldnt fit in my stove I used the Eastwood small IR Lamp. Results have been excellant. Im officially a powder coat junkie lol
    Including nuts & bolts Ive coated over 260 items from my truck now.

    My stroker mtr below total of 95 items I coated with Eastwood gun & powders (blue is custom mix of 4pwdrs)
    Also included before & after of some of my front end pieces Ive done.
    www.rm-indy.com
    Great product (Posted on 1/22/2011)
    Review by Gary N
    Price
    Value
    Quality
    I had my gun for little over 1 year and just recently have used it alot and it is awesome. I am thinking about buying another one so I can have the 2 colors I use the most ready to go. I put a tray under my part and try to recapture most of the overspray
    good entry level gun (Posted on 12/5/2010)
    Review by Chris
    Price
    Value
    Quality
    I wanted to try PC'g for a long time so when the demand came I choose this gun and an old toaster oven to start.
    Two things I would say are important to follow, distance from your part and have plenty of space or a fan with a filter on it to suck up the excess powder cuase it goes everywhere.
    Awesome (Posted on 3/30/2010)
    Review by Big Zee
    Price
    Value
    Quality
    Great product!! from a guy that has never powdercoated before, this gun, the prep materials, and the powders gave me a new hobby, and the stuff I've coated so far has turned out excellent. buying this kit will save you a ton of money letting you do it yourself as opposed to taking it to a pro shop.

    highly recommend it!
    Works well. Very Suprised (Posted on 3/23/2010)
    Review by Puntas
    Quality
    Price
    Value
    Very easy to use. Results turned out well. Very little start up cost. Glad i purchased it.
    Great gun for the price (Posted on 3/12/2010)
    Review by Dave
    Price
    Value
    Quality
    Great gun for the price. I coat a lot of smaller parts. This gun gives nice adhesion, not very much overspray. My first gun that I bought six years ago was an older Chicago Electric gun, and I *thought* that it was pretty good. Well, it died last fall, so I was forced to replace it. So I again tried the Chicago Electric guns, and they weren't very good. I took a chance on this gun, and it is WAY better! Super easy to clean, easy to use, nice spray pattern. This is a good value. The quality is pretty good.
    Very worthwhile (Posted on 2/17/2010)
    Review by Scott
    Price
    Value
    Quality
    I've had one for several years and have done race car parts motorcycle parts and stuff for friends I love the outcome of the process great deal might have to get the next step up gun soon with the dual voltage
    Amazing! (Posted on 1/26/2010)
    Review by TomK
    Price
    Value
    Quality
    This gun is unbelievable! From the very start, I had incredibly good results powder coating some of my motorcycle parts. I had no experience and no training, but I read the manual, followed the instructions carefully, and the parts came out beautiful! I've done a bunch of my own parts as well as quite a few for friends. They are thrilled with how nice everything came out. Last year I paid a powder coating company a good deal of money to coat parts for me. This gun has already paid for itself several times.

    The key to having good results is thorough preparation. Make sure that you have blasted off all paint and rust before you clean everything thoroughly. I use Eastwood's metal wash and outgas my parts in the oven before I coat them.

    I've attached a couple pictures of my work.

    Go for it and have fun!
    Amazing! (Posted on 1/11/2010)
    Review by Tom
    Price
    Value
    Quality
    I just used my powder coating gun for the first time and couldn't believe the results - totally awesome! After bead blasting and washing the parts, the actual powder application is simple and fun. I have an older kitchen range set up in my cellar and it has a digital readout for temperature and time. My spray "booth" is a large cardboard box with a hole cut in the top and an oven grate in place over the hole for hanging the parts.

    This has got to be one of the coolest, most fun tools I've ever bought and it will pay for itself in a very short time. I highly recommend it!

    Items 21 to 30 of 31 total

    per page
    1. 1
    2. 2
    3. 3
    4. 4

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register