Eastwood 100-lb. Pressure Abrasive Blaster

    Item #51118 Brand: Eastwood

    Heavy Item - Special shipping charges may apply.

    Details

    100-lb. "High-Flow" Pressure Blaster helps you remove rust and paint faster Bigger is better! Eastwood's "High-Flow" Pressure abrasive blaster features high-volume, extra-large valves, which means more air volume and more abrasive flow for faster removal of rust and paint.
    • 100-lb. media capacity
    • Large 1/2"-I.D. blaster hose and fittings
    • 8'-long, heavy-wall blast hose with deadman valve
    • Requires just 10cfm at 90psi
    • All-steel welded top-loading hopper and pressure gauge

    About Eastwood 100-lb. Pressure Abrasive Blaster

    Built for the professional, with a sturdy welded hopper, 1/2" heavy-duty nozzle, heavy-wall blast hose and safety pressure-relief valve, so it's rugged, durable, and very efficient. Don't skimp with one of those low-cost units that frustrate you with clogging and sporadic media spraying. This Eastwood pressure blasting machine completely strips the average frame in less than a day, rather than weeks using other units or methods. Designed for high flow with minimal air input; a compressor producing a minimum of 10cfm at 90psi will work fine. 18.5"H x 12"W.

    Rolls easily to your job site. For best results and the most efficient operation, use clean, dry, 80-grit or finer abrasive media. 1-year limited warranty.


    Contents

    100-lb.-capacity Blaster (30-60 minutes of blasting)
    Blast Hood
    Moisture Separator
    1/2"-ID x 8'-long Hose
    4 Ceramic Nozzles (2.0, 2.5, 3.0 and 5mm)


    Instructions

    Click here for instructions


    Safety

    WARNING: Blasting emits abrasive under pressure. Adequate respiratory, eye, and body protection must be worn during use. Inhalation of silica-based media particles have been known to cause cancer and other deadly diseases, and must be avoided. Wear NIOSH- approved respiratory protection while operating this equipment.


    Customers also viewed:

    Customer Reviews

    Items 11 to 18 of 18 total

    per page
    1. 1
    2. 2
    good (Posted on 4/10/2011)
    Review by rob
    Value
    Quality
    Price
    it works good but you have to change out the hose clamps the only down side is that change the price 10 hours after i bought it and would not honor it
    Great Product (Posted on 2/28/2011)
    Review by Henry Homeworker
    Quality
    Price
    Value
    Great product for the price. This is my first try at sand blasting, and with my own equipment because of the size of my project...cleaning up an older trailer from years of rust and layers of paint. The blaster works great, but does need some TLC to keep it running optimally.

    My only disappointment is that it did not come with brass fittings to readily connect to an air hose, but fortunately I had enough fittings and adapters in my toolbox to make something.

    The directions for use are a little out of date, and not in sync with the direction of the valves, but nothing common sense can't quickly figure out. Assembly went easily, but I added lock washers to the 4 nuts on the handles so they would not come loose.

    After using about 2 bags of sand, I got my first clog, that began repeating about every 10 minutes of use. I quickly discovered moisture at the bottom of the tank, and was able to blow it clean by removing the hose and blowing air through the open valve. I am now researching dryers and making sure that my air flow is as dry as possible before relying on the built in moisture separator.

    I've also noticed that after only 3.5 50 pound bags of triple zero sand, the nozzle tip is fairly worn, and the dead mans valve to stop the flow has developed a decent notch in it. This just shows the effectiveness of the sand, and the need to protect your skin from the flow.

    Overall, this is a great product and once I get the air running to it completely dry, I expect to have no issues beyond wearable parts.
    works very well (Posted on 6/19/2010)
    Review by Sand man
    Value
    Quality
    Price
    It cleans rust and paint wright off with no problems
    easy to use,I got the soda blast kit with my blaster
    yet to use it.
    i ordered over the phone and got it with in a few days very fast service
    Eastwood 100lb Pressure Abrasive Blaster (Posted on 3/29/2010)
    Review by CaliChoppers
    Price
    Value
    Quality
    very nice blaster for the money. i was searching harbor freight, and northern tools. i read the reviews and decided to get it. glad i did.
    Good Tool (Posted on 3/11/2010)
    Review by Bubba
    Price
    Value
    Quality
    Order some extra nozzels and water seperators with this tool. You will need them.
    Worth the money (Posted on 1/26/2010)
    Review by Mike
    Price
    Value
    Quality
    Excellent quality at a good price. Order some extra nozzles though, you will need them.
    excellent (Posted on 1/9/2010)
    Review by rusty1
    Price
    Value
    Quality
    Awesome pressure blaster for the price , way better than the harbor freight version , cant go wrong for the money
    Sooo much better! (Posted on 7/31/2009)
    Review by falconfan
    Price
    Value
    Quality
    After having gone through two Northern Tool blasters in the last few months, this unit was a dream come true. It truly is the cadillac of 100lb pressure blasters. I particularly like the fact that you can adjust the media flow and air pressure. My advice: don't waste your time on any other blaster in this price range.

    Items 11 to 18 of 18 total

    per page
    1. 1
    2. 2

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register