Eastwood 100-lb. Pressure Abrasive Blaster

Item #51118 Brand: Eastwood

Quality
Price
Value

14 Review(s)

Heavy Weight Item-Special shipping charges may apply.

Details

100-lb. "High-Flow" Pressure Blaster helps you remove rust and paint faster Bigger is better! Eastwood's "High-Flow" Pressure Blaster features high-volume, extra-large valves, which means more air volume and more abrasive flow for faster removal of rust and paint.

100-lb. media capacity
Large 1/2"-I.D. blaster hose and fittings
8'-long, heavy-wall blast hose with deadman valve
Requires just 10cfm at 90psi
All-steel welded top-loading hopper and pressure gauge

About Eastwood 100-lb. Pressure Abrasive Blaster

Built for the professional, with a sturdy welded hopper, 1/2" heavy-duty nozzle, heavy-wall blast hose and safety pressure-relief valve, so it's rugged, durable, and very efficient. Don't skimp with one of those low-cost units that frustrate you with clogging and sporadic media spraying. This Eastwood pressure blaster completely strips the average frame in less than a day, rather than weeks using other units or methods. Designed for high flow with minimal air input; a compressor producing a minimum of 10cfm at 90psi will work fine. 18.5"H x 12"W.

Rolls easily to your job site. For best results and the most efficient operation, use clean, dry, 80-grit or finer abrasive media. 1-year limited warranty.

100-lb.-capacity Blaster (30-60 minutes of blasting)
Blast Hood
Moisture Separator
1/2"-ID x 8'-long Hose
4 Ceramic Nozzles (2.0, 2.5, 3.0 and 5mm)

Click here for instructions

WARNING: Blasting emits abrasive under pressure. Adequate respiratory, eye, and body protection must be worn during use. Inhalation of silica-based media particles have been known to cause cancer and other deadly diseases, and must be avoided. Wear NIOSH- approved respiratory protection while operating this equipment.

Customer Reviews

Good Tool (Posted on 3/11/10) Review by Bubba

Price
Value
Quality

Order some extra nozzels and water seperators with this tool. You will need them.

Worth the money (Posted on 1/26/10) Review by Mike

Price
Value
Quality

Excellent quality at a good price. Order some extra nozzles though, you will need them.

excellent (Posted on 1/9/10) Review by rusty1

Price
Value
Quality

Awesome pressure blaster for the price , way better than the harbor freight version , cant go wrong for the money

Sooo much better! (Posted on 7/31/09) Review by falconfan

Price
Value
Quality

After having gone through two Northern Tool blasters in the last few months, this unit was a dream come true. It truly is the cadillac of 100lb pressure blasters. I particularly like the fact that you can adjust the media flow and air pressure. My advice: don't waste your time on any other blaster in this price range.