Home
Welders Helper 3X3 Set Flat/Curve/Angle Copper Plates
Product Reviews

Welders Helper 3X3 Set Flat/Curve/AngleCop Plates

Welders Helper 3X3 Set Flat/Curve/Angle Copper Plates

Item #51139

Quality
Price
Value

7 Review(s)

Details

Copper "Welder's Helpers" plug holes as they support your welding in tight spots Use these three 100%-copper "spoons" to back-up small holes, rips or voids between flat, round and angled panels while you weld.

90-Degree Angle Plate
Curved Plate
Offset Flat Plate

About Welders Helper 3X3 Set Flat/Curve/Angle Copper Plates

Each of the spoons acts as a heat sink to prevent warping. Welding material will not stick to copper. Special 3-hole mounting design permits setting the back offset left, right or straight. 3-piece set includes an Offset Flat Plate, Curved Plate, and 90-degree Angle Plate, with two set screws and interchangeable handle. Made in USA.

3-1/2" 90-Degree Angle Plate
3-1/2" Curved Plate
3-1/2" Flat Plate
Universal Handle
2 Mounting Screws

Wear appropriate eye protection when welding.

Customer Reviews

Good Product, But Little Expensive (Posted on 4/23/13) Review by Michael

Value
Quality
Price

Bought this set along with flat 8" & 4" copper plates. Copper plates easier to use but magnets are whimpy and ultimately fail, so these spoons become a must. Odd shapes does help find a flat surface behind the weld to reduce blow-out. Minus some form of a welders helper when working with thin sheetmetal and/or aged floor board/fender sheetmetal, you will face constant aggravation from blow-outs. These spoons help solved the problem and do work. Handle does warm some when doing extensive work, but not enough to be a problem. If flat plates had better magnets, they would be the ultimate choice. But they don't so this set remains good alternative.

Handle grip melted first use (Posted on 3/24/12) Review by Gojeep

Price
Value
Quality

First use and after welding up 5x 7/16" holes in a chassis rail in a row, the handle covering got too hot and started to melt. You have to be careful and constantly dip it in cold water to cool it down even while wearing welding gloves.
I expected better from something made in the USA as even a wooden handle would have been a better choice.

Would highly recommend for bodywork. (Posted on 10/18/11) Review by DAT

Value
Quality
Price

This product is borderline mandatory for body working. I have an old imported rust bucket, lots of patch panels. This has made it considerably easier to cleanup and finish the body- no more blow throughs! If you value your time get these!

Handy to have (Posted on 9/26/11) Review by Pat

Value
Quality
Price

These have come in very handy, for filling holes, and doing panels, especially if the gap is a little too wide in a spot.

very good sturdy tool (Posted on 6/5/11) Review by jim bobby

Price
Value
Quality

i used this to weld my patch panels and reassemble panels that i cut spot welds from. good thick copper and the ability to offset the handle with 3 different copper pieces makes this tool worthy over other copper spoons.

excellent product (Posted on 11/27/10) Review by JEFFREY

Price
Value
Quality

i am restoring a milk truck and have about 85 holes to weld up in order to weld the side panels in instead of using rivets easy to use makes welding up holes a piece of cake should of got these a long time ago

good (Posted on 10/23/10) Review by Daniel

Price
Value
Quality

these are great very easy to use and do an excellent job
only draw back I found is that with extended use the handle heats up so as you can no longer hold it