Eastwood Ceramic Engine Paint Quart 66-80 Ford Dark Blue

    Item #777 51623ZP Brand: Eastwood

    Price
    Value
    Quality
    4 Review(s)

    Details

    Eastwood's "Ford Dark Blue" Ceramic Engine Paint withstands up to 650 degreesF Super-durable, high-temp engine paint utilizes ceramic nano-technology to produce a beautiful, factory-look finish that protects your engine and resists chips, chemicals and heat.
    • Withstands up to 650 degreesF (highest in the industry!)
    • Easy to apply – brush or spray
    • 1-quart can covers approx. 40 square feet
    • For additional durability and gloss, add Urethane Activator 21854Z

    About Eastwood Ceramic Engine Paint Quart 66-80 Ford Dark Blue

    Eastwood's Ceramic Engine Enamels provide a beautiful factory look finish that is super-durable and will withstand temperatures up to 650 degrees F. Developed using the latest ceramic nano-technology integrated with silicone alkyds, this is the new standard in engine coatings. Each color is replicated after the original color for that deep rich factory look. The ceramic nano-technology ensures that your motor will be protected and resist small chips, chemicals and heat. In fact this is the highest temperature range in the industry, 650 degrees F! NOT FOR USE ON EXHAUST MANIFOLDS OR HEADERS

    Not for sale or use in California. Eastwood Paints are formulated to meet National Rule VOC regulations; check with your local and state guidelines as some areas may have stricter regulations than others.

    Due to regulations pertaining to recycling, we are unable to ship this product to Alberta, Canada.


    Contents

    32 Fluid Ounces 1 US Quart


    Accessories

    Eastwood offer a wide variety of underhood and undercart coatings. Exhaust manifold Paints Underhood black 10024z 10032z Spray Gray, 10109Z Aluma-Blast, 10036z Detail Gray PRE 10041z & 10194zp Underhood detailing kit 10426z Long term engine storage bag kit 50470 Engine rebuilding tools and installation equipment


    Instructions


    Click Here for Material Safety Data Sheet
    <

    Click here for product information sheet


    Safety

    Always wear eye, skin and respiratory protection. Consult MSDS for specific safety precautions. Always use in a well ventilated area.


    Warranty

    Made in USA


    Application

    To apply simply clean all surfaces with PRE (10041Z or 10194ZP) to remove all oils and greases, apply Ceramic Coating using a brush or spray gun. Two coats may be needed for full coverage. Some reduction up to 10%, may be needed to spray, use EW reducer 50104ZP. No primer is necessary and allow 24 hours to fully cure NOT FOR USE ON EXHAUST MANIFOLDS OR HEADERS


    Customers also viewed:

    Customer Reviews

    4 Item(s)

    per page
    Looks good but doesn't last (Posted on 8/24/13)
    Review by Glenn
    Price
    Value
    Quality
    This paint looks good but anti-freeze will destroy it! Engine coolant will etch the paint and will leave a near white blotch that can't be removed once coolant has touched it. This is VERY disappointing for an expensive engine compartment paint
    Impressive (Posted on 10/13/12)
    Review by Wagger
    Quality
    Price
    Value
    I have tried a few rattle can versions of Ford Corporate and haven't been too impressed. I then tried two brands of spray on and found Eastwood to be about the closest to factory color. However, I said closest but not spot on as the color is "brighter" than original and definitely shinier. Personally, I prefer the look as it is very impressive and should be easy to keep clean. As far as application ... I mixed up a batch as per instructions and right away could see it was too thick to spray well. So, I thinned it down 10% and applied first coat but it was still too thick using my HVLP touchup gun. For the second coat, I took it to about 18% and that seemed to work well. Through all this I got a small sag trying to get the desired finish. (I hate orange peel) After a week or so, I sanded the sag and polished it out and now looks fantastic. If looking to dazzle, this is your paint.
    Great Paint - finished product is impressive (Posted on 3/19/10)
    Review by Ron
    Price
    Value
    Quality
    I shot my transmission with this paint using the activator and it looks like it was powder coated. Very high gloss finish. Paint lays on real well and certainly does NOT look like a rattle can was used.

    Great Stuff (Posted on 3/13/10)
    Review by jmk3
    Quality
    Price
    Value
    I just used this ford Dark blue on my 351 & its amazing, I sprayed it with a touch up gun, I used the recomended activator. the paint flowed out so smooth I can literally see myself in the side of the block. Not 1 run or sag, thats great for me. I was going to use some cheap rattle can hi temp but decided to try this after all my hard work. Great product.

    4 Item(s)

    per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register