Details

About Eastwood Ceramic Engine Paint Qt Universal Gloss Black

Eastwood's Ceramic Engine Enamels provide a beautiful factory look finish that is super durable and will withstand temperatures up to 650 degrees F. Developed using new standard in engine coatings. Each color is replicated after the original color for that deep rich factory look. The ceramic nanotechnology ensures that your motor will be protected and resist small chips, chemicals and heat. In fact this is the highest temperature range in the industry, 650 degrees F. NOT FOR USE ON EXHAUST MANIFOLDS OR HEADERS. For best results and highest durability use Eastwood's 21854z hardener.

Not for sale or use in California. Eastwood Paints are formulated to meet National Rule VOC regulations; check with your local and state guidelines as some areas may have stricter regulations than others.

Due to regulations pertaining to recycling, we are unable to ship this product to Alberta, Canada.

Clean all surfaces with PRE (10041Z or 10194ZP) to remove oils and greases. Then apply this Ceramic Engine Paint using a brush or spray gun. Two coats may be needed for full coverage. Some reduction up to 10% may be needed to spray; use Eastwood Reducer (50104ZP). No primer necessary. Allow 24 hours to fully cure. NOT FOR USE ON EXHAUST MANIFOLDS OR HEADERS.

21854Z Urethane Activator
10024Z Underhood Black Semi Gloss
10032Z Spray Gray
10109Z Aluma-Blast
10036Z Detail Gray
10041Z, 10194ZP PRE Painting Prep
10426Z Underhood Detailing Kit
50104ZP Eastwood Reducer

Click here for product information sheet

Always wear eye, skin and respiratory protection.