Eastwood Ceramic Engine Paint Quart Universal Cast Iron

    Item #777 51633ZP Brand: Eastwood

    Quality
    Price
    Value
    3 Review(s)

    Details

    Eastwood sets the standard in high temp engine paints!
    • Super durable, utilizing ceramic nanotechnology
    • Protects engine and resists chips, chemicals and heat
    • Withstands temperatures up to 650 F
    • Provides a beautiful factory-look finish
    • Easy to apply – brush or spray on (for best results metallic’s should be sprayed)
    • One quart covers approx. 40 square feet
    • For added durability and gloss use Eastwood's activator 21854Z

    About Eastwood Ceramic Engine Paint Quart Universal Cast Iron

    Eastwood's Ceramic Engine Enamels provide a beautiful factory look finish that is super-durable and will withstand temperatures up to 650³ F. Developed using the latest ceramic nano-technology integrated with silicone alkyds, this is the new standard in engine coatings. Each color is replicated after the original color for that deep rich factory look. The ceramic nano-technology ensures that your motor will be protected and resist small chips, chemicals and heat. In fact this is the highest temperature range in the industry, 650³ F! NOT FOR USE ON EXHAUST MANIFOLDS OR HEADERS


    Contents

    32 Fluid Ounces 1 US Quart


    Accessories

    Eastwood offer a wide variety of underhood and undercart coatings. Exhaust manifold Paints Underhood black 10024z 10032z Spray Gray, 10109Z Aluma-Blast, 10036z Detail Gray PRE 10041z & 10194zp Underhood detailing kit 10426z Long term engine storage bag kit 50470 Engine rebuilding tools and installation equipment


    Instructions

    Click here for product information sheet


    Safety

    Always wear eye, skin and respiratory protection. Consult MSDS for specific safety precautions. Always use in a well ventilated area.


    Warranty

    Made in USA


    Application

    To apply simply clean all surfaces with PRE (10041Z or 10194ZP) to remove all oils and greases, apply Ceramic Coating using a brush or spray gun. Two coats may be needed for full coverage. Some reduction up to 10%, may be needed to spray, use EW reducer 50104ZP. No primer is necessary and allow 24 hours to fully cure NOT FOR USE ON EXHAUST MANIFOLDS OR HEADERS


    Customers also viewed:

    Customer Reviews

    3 Item(s)

    per page
    Good Paint; Poor Color Match (Posted on 3/18/14)
    Review by Michael
    Value
    Quality
    Price
    Paint coveres well and has a good finish, but does NOT match the picture in the desciption. Paint matches the Aluminum product
    Good Paint; Poor Color Match (Posted on 3/18/14)
    Review by Michael
    Value
    Quality
    Price
    Paint covered well and has a good finish, but the color does NOT look like the image shown in the picture above. The color matches the Aluminum picture.
    Paint is alright, but color is not cast-iron (Posted on 7/10/12)
    Review by Charlie
    Price
    Value
    Quality
    I painted an XS650 motor with this paint and it came out a LOT lighter than I expected. So, I ordered another can and gave it another shot. Same results; the color is not at all cast iron. It's actually much closer to gunmetal grey.

    Here's some pictures of the result:
    http://gnarlywrench.blogspot.com/2011/12/xs650-motor-paint-part-deux.html

    3 Item(s)

    per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register