Eastwood Black Rust Encapsulator Kit

    Item #51639ZP Brand: Eastwood

    Details

    Stop rust in its tracks! Our 2-Pc. Rust Encapsulator Kit has been reformulated with TWICE the corrosion resistance! You thought it was good before...wait ’til you try this Rust Encapsulator! It seals and stops rust and corrosion from spreading, but it performs even better than our original formula. Tested against well-known brands, the Eastwood Rust Encapsulator has proven to be superior in sunlight resistance, preventing rust creep, and overall durability.
    • 16-oz. aerosol (covers about 10 sq. ft.) plus 1-quart can (covers about 50 sq. ft.)
    • Twice the corrosion resistance of our original formula for greater durability (tested to 500 hours in a salt-spray chamber)
    • Epoxy-fortified for better adhesion and topcoat compatibility
    • Penetrates deeper to prevent rust from spreading or forming, even in hard-to-reach areas
    • Cures faster, and the low-VOC formula is acceptable in California
    • As seen on "My Classic Car" TV show

    About Eastwood Black Rust Encapsulator Kit

    Eastwood Rust Encapsulator has been tested by an independent lab to be one of the most effective rust-preventive products yet. Rust Encapsulator is a great primer for floor pans and other underbody parts. It fills tiny pin-holes and surface irregularities, and is compatible with lacquer, enamel and urethane topcoats (including Eastwood Chassis Black). For the absolute ultimate rust remedy, first brush or spray-on Eastwood Rust Converter, then prime with Rust Encapsulator. Contains no isocyanates. Heat-resistant up to 400 degreesF. Made in the USA.

    Due to regulations pertaining to paint recycling, at this time we are unable to ship this product to Alberta, Canada.


    Contents

    16060Z Rust Encapsulator Black, Aerosol
    16065ZP Rust Encapsulator Black, Quart


    Accessories

    In places where little or no surface prep can be done, our Heavy-Duty Anti-Rust (16017ZP) is actually a better choice for applying into blind areas such as box sections.


    Application

    Use a wire brush to remove loose rust, scale and paint, and remove dust, grease and oil deposits. Feather surrounding paint with 220-grit sandpaper. Brush-apply directly from the can, thin 20% with lacquer thinner to spray, or use the aerosol. A single coat dries to the touch in 20 minutes, and is thoroughly dry in 3-4 hours at 68 degreesF. For greater durability, a second coat can be applied 1 hour after the first. Allow 6-8 hours after the last coat before applying topcoat. Use over or under body fillers.


    FAQs

    (Q) Can Rust Encapsulator be applied with the Undercoating System?
    (A) Technically, yes, but this application isn't recommended because Rust Encapsulator requires surface to be free of grease, oil, and loose rust. The best product to coat inside box sections is the Heavy-Duty Anti-Rust (16017ZP). This waxy, oily product flows into pinch welds and through rust to seal surfaces from contact with moisture and air, but cannot be painted over, so it's only suitable for inside box sections that don't show. Use lacquer thinner for cleanup.


    Customers also viewed:

    Customer Reviews

    7 Item(s)

    per page
    a very good product (Posted on 7/14/2014)
    Review by jay
    Quality
    Price
    Value
    the only issue I have is the fact that you sell the kit in two different glosses....flat black and matte black ....this doesn't make sense and neither does the fact that you offer matte black in spray cans and gallons but not in quarts...why?
    Great product for addressing surface rust (Posted on 7/11/2014)
    Review by Gregg
    Price
    Value
    Quality
    Used this after the cleaning and prep of a rust surface. Put this on after using the rust converting product and so far the work looks good.
    Works well (Posted on 3/27/2014)
    Review by James
    Quality
    Price
    Value
    Used this after the cleaning and prep of a rust surface. Put this on after using the rust converting product and so far the work looks good.
    Using Rust Encapsulator As Primer With Filler (Posted on 1/28/2014)
    Review by Alan
    Price
    Value
    Quality
    Back in 2000, I used Rust Encapsulator as the base primer for a complete restoration of a Toyota FJ-60. It never showed signs of rusting when I sold the vehicle in late 2003. I have had similar success when using it on farm implements. June of 2013, I redid body work performed as an insurance job on my Silverado. The plastic filler was cracking and peeling in several spots. I sanded, ground, and pulled dented surfaces (stud welder). Plastic filler was still needed. I applied Rust Encapsulator over the bare metal. After drying, I scuffed the primed surfaces, then applied plastic filler. The process was repeated to take care of high and low spots. Then Rust Encapsulator was used to cover the entire repair area. The plastic filler is sandwiched between applications of RE. It is now mid winter 2014, and there are absolutely no signs of cracking or bulging filler, and there is no rust. For me, this has proven to be a great treatment that acts to bolster the effectiveness of my DIY body and paint work. Additionally, when thoroughly dry, RE is a very, very tough paint. It is quite resistant to rock chips.
    After my first use of this product, I now keep a quart stocked at all times (Posted on 12/1/2013)
    Review by Brandon
    Quality
    Price
    Value
    I've tried a lot of ways of dealing with rust. And while it isn't a silver bullet, I now put rust encapsulator on every part I take off of my vehicles that I intend to put back on. This only applies to items which are rusty and usually under carriage or inner body panels. If I make sure that all loose rust, grease, etc. has been cleaned off, this stuff forms a very tough coating that stands on its own. I typically then cover it with the satin chassis black, but it's not necessary. Since my first use of this product, I now keep a quart around at all times.
    Good Product,Looks Good (Posted on 7/31/2013)
    Review by ED
    Price
    Value
    Quality
    Works as advertised very little prep on the frame of my truck added a nice touch
    Good products; quart requires thorough mixing (Posted on 5/5/2010)
    Review by Bernie
    Quality
    Price
    Value
    As with similar products, the quart can requires thorough mixing prior to use. (You need a "paint shaker" to do the job correctly. Stirring with a paint stick simply won't do it.) The spray goes on thinner and covers those areas the brush won't reach. All in all, both products are essential to a good restoration.

    7 Item(s)

    per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register