Eastwood Rust Converter One Quart

    Item #51676

    Value
    Quality
    Price
    28 Review(s)

    Details

    Rust Converter stops residual rust, and turns it into a black, protective, ready-to-paint coating, without sanding Eastwood's own high-tech anti-rust formula converts rust into a protective polymeric coating that's ready to go as a primer, and is compatible with most top coats. That new protective coating will also seal the surface against moisture to prevent future rust growth.
    • Just brush-on (or spray) to transform the rust
    • Penetrates faster than other brands
    • No mixing needed
    • 50-sq.-ft. coverage per quart container

    About Eastwood Rust Converter One Quart

    This high-tech formula halts residual rust in its tracks and converts it into a black protective polymeric coating that eliminates the need for sanding. The converted protective coating is a suitable primer, and is compatible with most top coats. Plus, the protective coating will seal the surface against moisture to prevent future rust growth. Applies easily: simply remove loose rust with a wire brush, then brush-on Eastwood’s Rust Converter paint. Allow to dry, then top coat it with a quality coating, such as Eastwood’s Chassis Black. Single component; no more mixing. 50-sq.-ft. coverage per quart container. Made in the USA.


    Contents

    1-quart container (32 fl. ozs.)


    Specs

    Accessories

    10041Z PRE Painting Prep
    16060Z Rust Encapsulator
    10025Z Chassis Black
    11175Z Extreme Chassis Black
    10426Z Underhood Detailing Kit
    51550 Eastwood Concours HVLP Paint Spray Gun with 1.2mm tip
    50109Z 2K Ceramic Chassis Black Gloss & Epoxy Primer Kit


    Safety

    Always use appropriate eye, skin, and respiratory protection when using this product. Safety information is also described on the can. Consult MSDS (Material Safety Data Sheet) for proper safety requirement.


    Warranty

    90-day mfr's. warranty against defects.


    Instructions

    Applies easily: simply remove loose rust with a wire brush, then brush- or spray-on Eastwood’s Rust Converter. Allow to dry, then top coat it with a quality coating, such as Eastwood’s Chassis Black.

    For use on steel and iron only; DO NOT apply to paint. First use a wire brush to scrape rust off surface. Liberally brush-on or spray-on Eastwood Rust Converter, let dry 20-30 minutes. Finally, apply top coat such as Eastwood Rust Encapsulator or Chassis Black.


    Customers also viewed:

    Customer Reviews

    Items 21 to 28 of 28 total

    per page
    1. 1
    2. 2
    3. 3
    Incredible stuff! (Posted on 7/24/10)
    Review by falconfan
    Value
    Quality
    Price
    I have used EW Rust Converter on my Ranchero restoration, the exterior wrought iron columns on a house exterior, just about everything metal around!!

    Rust Converter is absolutely amazing. It completely and totally converts rust into a primer within minutes. You won't believe it until you try it!

    A must have product for any kind of metal restoration.
    Rust Converter (Posted on 7/15/10)
    Review by Runner1952
    Value
    Quality
    Price
    An excellent product. Have used it several times on a car restoration and other items and would highly recommend this products. Also, the Rust Encapsulator is great over the rust converter.
    Outstanding Prroduct, Outstanding Value (Posted on 7/6/10)
    Review by Bobby Rodd
    Value
    Quality
    Price
    I have used other rust conversion products that were very, very good. Rust Converter is the best, without question. I used it on the frame-up restoration of my '37 Buick. Easy to use, durable, and even less expensive... how can you beat that?
    Cool product (Posted on 4/17/10)
    Review by Matt
    Price
    Value
    Quality
    Goes on milky, turns purple, then tuns satin/flat black when dry. Final appearance looks like black oxide and is pretty cool looking (paint a whole car with it?). Black coating is very tough and a good "insurance policy" to keep rust from coming back. I used it on the floor boards of my 1958 Chevy Apache after removing all the surface rust and am confidant it'll never rust again.
    Great Stuff (Posted on 4/12/10)
    Review by bigfigure
    Price
    Value
    Quality
    This stuff really works,I have used it on garden tractor parts,RV's.Does just what's advertised.
    Great Stuff (Posted on 4/4/10)
    Review by Apache 10
    Price
    Value
    Quality
    Sandblasted frame.Rust converter went on smooth, went along way. Primed over it and painted gloss black. One of those things you feel good about, after the job is done! Can't imagine putting primer on before rust converter.I use it on all of restorations.
    Pretty good product (Posted on 1/25/10)
    Review by Oldmusher
    Quality
    Price
    Value
    We sandblasted the frame and the bottom of the cab of a 1951 Ford F1 I am reworking. It is a great-shape truck. Right after we blasted it, we wiped it down with a clean rag, and shot the rust converter. It looked like egg nog, but it sprayed just fine. Contrary to the directions, we sprayed it at about 40 degrees F. After it went on it turned purple! After a day or two I looked in at it, and it had turned a flat black, and was just perfect. Good stuff. I have to learn to follow directions!
    Rust converter works (Posted on 1/25/10)
    Review by c5 farmer1
    Quality
    Price
    Value
    Rust Converter is easy to apply and goes a long way. I used a sponge brush that eventually disintegrated, so would recommend a good paint brush if you are doing a large job. The container can be closed for storage, so what you don't use can be saved. The rust surface turns dark and two coats later it is ready for your next step. Goes on easy and dries quickly. Easy to follow directions.

    Items 21 to 28 of 28 total

    per page
    1. 1
    2. 2
    3. 3

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register