Eastwood Rust Converter One Quart

    Item #51676

    Details

    Rust Converter stops residual rust, and turns it into a black, protective, ready-to-paint coating, without sanding Eastwood's own high-tech anti-rust formula converts rust into a protective polymeric coating that's ready to go as a primer, and is compatible with most top coats. That new protective coating will also seal the surface against moisture to prevent future rust growth.
    • Just brush-on (or spray) to transform the rust
    • Penetrates faster than other brands
    • No mixing needed
    • 50-sq.-ft. coverage per quart container

    About Eastwood Rust Converter One Quart

    This high-tech formula halts residual rust in its tracks and converts it into a black protective polymeric coating that eliminates the need for sanding. The converted protective coating is a suitable primer, and is compatible with most top coats. Plus, the protective coating will seal the surface against moisture to prevent future rust growth. Applies easily: simply remove loose rust with a wire brush, then brush-on Eastwood’s Rust Converter paint. Allow to dry, then top coat it with a quality coating, such as Eastwood’s Chassis Black. Single component; no more mixing. 50-sq.-ft. coverage per quart container. Made in the USA.


    Contents

    1-quart container (32 fl. ozs.)


    Specs

    Accessories

    10041Z PRE Painting Prep
    16060Z Rust Encapsulator
    10025Z Chassis Black
    11175Z Extreme Chassis Black
    10426Z Underhood Detailing Kit
    51550 Eastwood Concours HVLP Paint Spray Gun with 1.2mm tip
    50109Z 2K Ceramic Chassis Black Gloss & Epoxy Primer Kit


    Safety

    Always use appropriate eye, skin, and respiratory protection when using this product. Safety information is also described on the can. Consult MSDS (Material Safety Data Sheet) for proper safety requirement.


    Warranty

    90-day mfr's. warranty against defects.


    Instructions

    Applies easily: simply remove loose rust with a wire brush, then brush- or spray-on Eastwood’s Rust Converter. Allow to dry, then top coat it with a quality coating, such as Eastwood’s Chassis Black.

    For use on steel and iron only; DO NOT apply to paint. First use a wire brush to scrape rust off surface. Liberally brush-on or spray-on Eastwood Rust Converter, let dry 20-30 minutes. Finally, apply top coat such as Eastwood Rust Encapsulator or Chassis Black.


    Customers also viewed:

    Customer Reviews

    Items 11 to 20 of 28 total

    per page
    1. 1
    2. 2
    3. 3
    works great (Posted on 12/26/2011)
    Review by jimo
    Quality
    Price
    Value
    I used it on the outside of my rusty gastank, worked great. Then I painted it with rust encapulating paint. good as new!
    great product (Posted on 8/28/2011)
    Review by jozan
    Value
    Quality
    Price
    great product works as advertized, had to spray it with my touch up gun because none of the spray bottles i had would spray it the way i liked, dont think it would be a problem to brush it on . it layed down flat when drying, got it on sale made it even better
    Awsome roduct (Posted on 8/7/2011)
    Review by mcbuzz
    Price
    Value
    Quality
    This product is great. Does just what they say it does. Goes on easy with spunge brush and is thin enough to get into all the crevices.
    Would recomend to anyone wanting to stop rust it its tracks.
    dont use (Posted on 6/17/2011)
    Review by jt
    Price
    Value
    Quality
    ive used most of eastwoods products and i use and try most of the products on the market .ive found that thic product doesnt do as its claim wait till it turns black give it a day then resand the area u will find that there is more rust then b4 even after it was rust free there will be rust afterwards.the past few years eastwoods products have dropped in quality hope they bring it back up and soon i feel that i cant use most of there products in my shops anymore dues to the quality and prices.
    doesnt dry (Posted on 4/12/2011)
    Review by Mike
    Value
    Quality
    Price
    Used this a couple of times on a rusted frame and stayed sticky and never really cured
    Eastwood Rust Converter (Posted on 4/3/2011)
    Review by Bill
    Quality
    Price
    Value
    I use this on my 2001 Ram 2500 Diesel. Unpainted, it leaves a clean, black factory new finish.
    the best conveter. (Posted on 1/15/2011)
    Review by morgan
    Price
    Value
    Quality
    I have in the last year completed a complete suspension overhaul and lift on my 98 k1500
    an used Eastwood converter on many parts.
    It really goes a long way. You need less then you would think! I still had leftovers from my first quart and my pop used that up. I ordered a second quart so it would be in the garage when we need it. Love the extreme chasi clack!
    outstanding product (Posted on 11/14/2010)
    Review by goofey
    Price
    Value
    Quality
    I am using this on my 57 Chev with great success, spray on and let stand and the rust changes to a paintable surface.
    great (Posted on 8/14/2010)
    Review by pug
    Value
    Quality
    Price
    put converter on the frame of 37 ford coupe worked great .
    works amazing! (Posted on 8/8/2010)
    Review by Miranda
    Value
    Quality
    Price
    living in new england our vehicles take it hard in the winter the salt from the road can make your car rust out in one winter this rust converter has saved two of my vehicles and when my dad and i started rebuilding our jeep we knew exactly what we were going to use on it! This Rust converter is amazing!
    It works great and seems to last I will continue buying this for all of my other vehicles.

    Items 11 to 20 of 28 total

    per page
    1. 1
    2. 2
    3. 3

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register