Eastwood Rust Converter One Gallon

    Item #51677

    Quality
    Price
    Value
    10 Review(s)

    Details

    Rust Converter stops residual rust, and turns it into a black, protective, ready-to-paint coating, without sanding Eastwood's own high-tech formula converts rust into a protective polymeric coating that's ready to go as a primer, and is compatible with most top coats. That new protective coating will also seal the surface against moisture to prevent future rust growth.
    • Just brush-on (or spray) to transform the rust
    • Penetrates faster than other brands
    • No mixing needed
    • 200-300-sq.-ft. coverage per gallon jug

    About Eastwood Rust Converter One Gallon

    This high-tech formula halts residual rust in its tracks and converts it into a black protective polymeric coating that eliminates the need for sanding. The converted protective coating is a suitable primer, and is compatible with most top coats. Plus, the protective coating will seal the surface against moisture to prevent future rust growth. Applies easily: simply remove loose rust with a wire brush, then brush-on or spray-on Eastwood’s Rust Converter. Allow to dry, then top coat it with a quality coating, such as Eastwood’s Chassis Black. Single component; no more mixing. 200-300-sq.-ft. coverage per gallon jug.


    Contents

    1-gallon jug (128 fl. ozs.)


    Accessories

    10041Z PRE Painting Prep
    16060Z Rust Encapsulator
    10025Z Chassis Black
    11175Z Extreme Chassis Black
    10426Z Underhood Detailing Kit
    51550 Concours Paint Gun
    50109Z Ceramic Chassis Black and Epoxy Primer Kit


    Safety / MSDS Sheet

    Always use appropriate eye, skin, and respiratory protection when using this product. Safety information is also described on the jug label. Consult MSDS (Material Safety Data Sheet) for proper safety requirement.

    Click Here for Material Safety Data Sheet


    Application

    Applies easily: simply remove loose rust with a wire brush, then brush- or spray-on Eastwood’s Rust Converter. Allow to dry, then top coat it with a quality coating, such as Eastwood’s Chassis Black.

    For use on steel and iron only; DO NOT apply to paint. First use a wire brush to scrape rust off surface. Liberally brush-on or spray-on Eastwood Rust Converter, let dry 20-30 minutes. Finally, apply top coat such as Eastwood Rust Encapsulator or Chassis Black.


    Customer Reviews

    10 Item(s)

    per page
    Seals Rust On Old Heating Tank (Posted on 6/16/13)
    Review by David
    Price
    Value
    Quality
    I knocked off the heavy scale from a used oil tank and sprayed the rust converter on before giving it a coat of HOT ROD FLAT BLACK the tank looks like new and I don't have to worry about the tank sitting out in the weather for years to come thanks for a great rust sealer !!!!!!!!!!!!!
    Good Stuff (Posted on 5/4/13)
    Review by Guy
    Price
    Value
    Quality
    It's far cheaper than the stuff the local marine suppliers are selling to the shipyards. The said not to get it on paint, but I had no problem on my '46 Willys Jeep, even the stuff that got on the paint dried. Covered real well with the Rust Encapsulator.
    nice (Posted on 3/4/13)
    Review by 38ford
    Price
    Value
    Quality
    Product was well worth price,amout and quility.I used a brush at first to see how it covered,then went to a spray gun.What was nice about the product is that it poured like water into the spray gun but when applied even in a large amout it didn`t drip.It stuck like glue.
    Thank you
    Higly recommended
    good product (Posted on 3/2/13)
    Review by desertdave
    Price
    Value
    Quality
    i used it at my shop in new hampshire for restorations , there is lots of rust in new england. and it worked very well, now that i have a shop in arizona there is less rust to deal with ,it seems to work better here. i seem to remember 15 years ago it seemed thicker and i used to thin it to get it to spray right.
    65 GALAXIE RESTO (Posted on 6/2/11)
    Review by mike
    Price
    Value
    Quality
    overall this chemical is legit, it seemed that it turned black before my eyes,i put it on and waited 48 hours, not a harsh acid like other products on the market, i would reccomend the foam brushes for sure they are the best, dont plan on spraying unless you have a big tarp to lay down first, kinda the consistincy of water... this is the first step to an awesome paint job right here
    quick rust stop (Posted on 12/6/10)
    Review by cormac
    Price
    Value
    Quality
    makes it easy to stop rust,and provides a nice surface to prime and paint. saves time and effort.
    rust converter (Posted on 5/30/10)
    Review by Possum
    Value
    Quality
    Price
    This is the best rust killer I have ever used. This is the third time I have bought rust converter. Thanks EASTWOOD for the great products that you have. Thanks poss
    Seems to be a very good product (Posted on 5/10/10)
    Review by Mark
    Value
    Quality
    Price
    This is the first time to use the Eastwood products. The rust converter seems to have worked well. I followed directions by using the Pre first then the rust converter whiched turned the metal to a black color. I followed up after 24 hours like instructed with the 2 coats of the encapsulator for the primer and then used the chassis black to finish. Worked and looked very good.
    EW Rust Converter (Posted on 1/26/10)
    Review by poss
    Price
    Value
    Quality
    This works wonderful, Turns the rust black and back into metal. I have bought it three deferent times and will keep using it on my 55 to 59 chevy projects. Thanks EASTWOOD for your great products.
    As advertised... (Posted on 12/12/09)
    Review by JR
    Price
    Value
    Quality
    Follow directions.. Works good.. I use on restoration of Farm Equipment...

    10 Item(s)

    per page

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register