- Home
- Eastwood Self-Etch Primer Gallon Gray
- Product Reviews
Details
Self-Etching Primer etches and primes bare, rust-free metal in just 1 step, to save you time
Self-Etching Primer is compatible with virtually any paint or auto finish. Single-stage formula requires no catalyst, so it's even easier to use.
- Adheres to steel, aluminum, stainless steel, scuffed galvanized steel
- Economical 1-gallon can covers about 120 sq. ft.
- Pre-thinned for spraying
- Lacquer-based
There are no upsell products available.
See this product in action!
About Eastwood Self-Etch Primer Gallon Gray
For best results, clean surface with PRE Painting Prep (10041Z) first. Top-coat within 24 hours; after 24 hours, scuff with 320-grit sandpaper before top-coating. Exercise care when using this over enamel finishes, as lifting may occur. Withstands up to 170 degrees.
NOT recommended for use under ANY of our ORIGINAL Chassis Black products, nor with any other epoxy-based coating.
CALIFORNIA RESIDENTS: Gallons are not for sale or use in California, so please try our quart (16009ZP) and 16-oz. aerosol (16014Z) formulas.
Due to regulations pertaining to paint recycling, at this time we are unable to ship this product to Alberta, Canada.
1-gallon can of Gray Self-Etching Primer
51604 Concours HVLP Primer/Base Gun with 1.2mm and 1.8mm tips
10014 PRE Painting Prep
31160 7-Piece Sanding Block Set
51136 Paint Chip Chart
20473 2-Stage Air Drying System
51537 Garage Air Line Kit
10014 PRE Painting Prep
31160 7-Piece Sanding Block Set
51136 Paint Chip Chart
20473 2-Stage Air Drying System
51537 Garage Air Line Kit
(Q) What spray gun tip size should I use?
(A) Use a heavy coatings tip, from 1.8mm to 2.2mm
(A) Use a heavy coatings tip, from 1.8mm to 2.2mm
Work in a well-ventilated area. A respirator is recommended when using this product.
Buy online or call 1-800-343-9353
 |
 |
 |
 |
 |
 |
 |
|