Eastwood Concours HVLP Paint Spray Gun w/1.2 Tip

Item #51550 Brand: Eastwood

Quality
Price
Value

14 Review(s)

No additional discounts apply.

Details

Concours HVLP Spray Gun with 1.2mm tip sprays-on a "show-car" finish...yet it's powered by your home compressor with only 4 cfm @ 29 psi! No need to buy an expensive pro paint gun when Eastwood's full-size HVLP Concours Spray Gun has the same impressive features at a fraction of the cost. And your home compressor provides all the air power you'll need (4 cfm @ 29 psi) to work with it.

Includes 1 stainless steel needle/nozzle/air cap (1.2mm)
Compatible with solvent and waterborne coatings
Anodized adjustment knobs and air cap ring
Backed by Eastwood's 10-year limited warranty

About Eastwood Concours HVLP Paint Spray Gun w/1.2 Tip

Eastwood Concours HVLP gravity-feed paint gun is an aluminum-bodied gun built for working comfort and reliability. With a working pressure of 29 psi and requiring only 4 cfm, this gun is perfect for the pro or hobbyist. 1.2mm needle/nozzle and passages are stainless steel, so they're compatible with both solvent and waterborne coatings. Includes tool kit and 1/4" NPT connection.

Download product instructions PDF

Concours HVLP Paint Spray Gun - How To Set-Up Guide & Maintenance Instructions

11549 PPS #2 Adapter
51551 1.2mm Needle/Nozzle/Air Cap
51552 1.4mm Needle/Nozzle/Air Cap
51553 1.8mm Needle/Nozzle/Air Cap
10041Z PRE Painting Prep
50207 DeKups Adapter
29953 34-oz. DeKups® Disposable-Cup Starter Kit

Always wear eye, skin and respiratory protection. Follow tech data sheet and MSDS of the paint you are applying. Always follow paint manufacturer's safety information. Always paint in a well-ventilated area, away from open flame and sparks.

Customer Reviews

Exellent gun for any level painter (Posted on 4/1/13) Review by Thomas

Price
Value
Quality

Used this gun for the first time I purchased it to spray chasis and floor pains underbody parts to keep my high end guns protected was very surprised at the finish quality of the gun I think my compressor kicked on once during the whole process would recommend for any level painter

Nice equipment (Posted on 1/15/13) Review by William

Value
Quality
Price

My first experience with HVLP and a good one.
I've sprayed polyester primer with the 1.8 tip and epoxy primer, sealer, and urethane enamel with the 1.4. I'm using a 35 yr old 3hp compressor with no problems.

I can't compare this to a high end gun like Iwata because I've never used one. For painting hobbyist cars like I'm doing, it's great.

no over spray went shoot the clear (Posted on 7/19/12) Review by hefty88

Price
Value
Quality

i get no over spray with gun i use it all time just for clear and ez the color sand i use satajet gun and iwata gun they give out over spray but this gun is a hvlp gun i get no over spray am going to buy one more for basecoat

Great gun - Great Price and Great Results! (Posted on 7/11/12) Review by Vinny I

Price
Value
Quality

This gun is the 4th spray gun I've owned, and the easiest to use. The results have been nothing short of phenominal with both single stage urethane and urethane primer. I'm now painting my project car (again) and look forward to using the gun, it's that good!

Highly recommend this product!

Love this gun (Posted on 5/25/12) Review by Warren

Value
Quality
Price

This is my first HVLP gun and I love it. Sprays beautifully, adjusts quick and easy, uses no air to speak of. I was amazed at how well it works. And the price great also.

Concours Quality (Posted on 3/27/12) Review by Ken

Value
Quality
Price

I was a little skeptical about this gun. But after I recieved it and used it I realized just how well this gun works. Not only did it provide an excellent finish but, it saved some material also. I am impressed with how easy it was to dial in and get great results in just minutes. Thanks to Eastwood I recommend this gun as well as all of their products to my customers.

Not bad (Posted on 12/2/11) Review by Gene

Price
Value
Quality

They should make a 1.3/1.4 combo instead. 1.2 tip is good for waterborn paints only. 1.4 tip is great for pearls and metalics. If you know how to spray then you can make your paint job as good as if you are using higher end guns. For the money that I spent I am pleased.

Great Gun (Posted on 7/13/11) Review by Dean

Price
Value
Quality

For those that are compressor challenged I can't recommend this gun enough. Was skeptical how it would atomize paint at such low cfm requirements, but no worries, it works great..
Buy the larger tips if doing 2K primer, I used the 1.4 and it worked fine. The 1.2 would be fine for most bases and some clears.
Big thumbs up from me.

A great gun for the price (Posted on 5/23/11) Review by Martin

Value
Quality
Price

I used this gun with my 17 gallon home compressor to paint a car this weekend. While the compressor did struggle to keep up, the paint quality from the gun was very good! I was surprised at the level of quality I was able to get with very little adjustment from the gun. I purchased the kit with the 1.8, 1.4 and 1.2 tips. I used the 1.8 for the primer and the 1.4 for base coat and clear, and I am very happy with the results. I was a little skeptical about this gun when I ordered it, but would not hesitate to recommend it to others now.

Great (Posted on 2/15/11) Review by Street sweeper

Price
Value
Quality

Spray's good I shot ppg through it and it came out amazing the only thing that I'd change is I would offer 1.3 tip cause the clear was kinda hard too lay perfect but over all it was great cleans up really good and is super easy too set up two test shots and that thing was laying SUPER flat!