Eastwood Concours HVLP Paint Spray Gun w/1.2 Tip

    Item #51550 Brand: Eastwood

    Price
    Value
    Quality
    18 Review(s)
    No additional discounts apply.

    Details

    Concours HVLP Spray Gun with 1.2mm tip sprays-on a "show-car" finish...yet it's powered by your home compressor with only 4 cfm @ 29 psi! No need to buy an expensive pro paint gun when Eastwood's full-size HVLP Gun has the same impressive features at a fraction of the cost. And your home compressor provides all the air power you'll need (4 cfm @ 29 psi) to work with it.
    • Includes 1 stainless steel needle/nozzle/air cap (1.2mm)
    • Compatible with solvent and waterborne coatings
    • Anodized adjustment knobs and air cap ring
    • Backed by Eastwood's 10-year limited warranty

    About Eastwood Concours HVLP Paint Spray Gun w/1.2 Tip

    Eastwood Concours HVLP gravity-feed automotive paint gun is an aluminum-bodied gun built for working comfort and reliability. With a working pressure of 29 psi and requiring only 4 cfm, this gun is perfect for the pro or hobbyist. 1.2mm needle/nozzle and passages are stainless steel, so they're compatible with both solvent and waterborne coatings. Includes tool kit and 1/4" NPT connection.


    Instructions

    Download product instructions PDF

    Concours HVLP Paint Spray Gun - How To Set-Up Guide & Maintenance Instructions


    Accessories

    11549 PPS #2 Adapter
    51551 1.2mm Needle/Nozzle/Air Cap
    51552 1.4mm Needle/Nozzle/Air Cap
    51553 1.8mm Needle/Nozzle/Air Cap
    10041Z PRE Painting Prep
    50207 DeKups Adapter
    29953 34-oz. DeKupsĀ® Disposable-Cup Starter Kit


    Safety

    Always wear eye, skin and respiratory protection. Follow tech data sheet and MSDS of the paint you are applying. Always follow paint manufacturer's safety information. Always paint in a well-ventilated area, away from open flame and sparks.


    Customers also viewed:

    Customer Reviews

    Items 11 to 18 of 18 total

    per page
    1. 1
    2. 2
    Not bad (Posted on 12/2/11)
    Review by Gene
    Price
    Value
    Quality
    They should make a 1.3/1.4 combo instead. 1.2 tip is good for waterborn paints only. 1.4 tip is great for pearls and metalics. If you know how to spray then you can make your paint job as good as if you are using higher end guns. For the money that I spent I am pleased.
    Great Gun (Posted on 7/13/11)
    Review by Dean
    Price
    Value
    Quality
    For those that are compressor challenged I can't recommend this gun enough. Was skeptical how it would atomize paint at such low cfm requirements, but no worries, it works great..
    Buy the larger tips if doing 2K primer, I used the 1.4 and it worked fine. The 1.2 would be fine for most bases and some clears.
    Big thumbs up from me.
    A great gun for the price (Posted on 5/23/11)
    Review by Martin
    Value
    Quality
    Price
    I used this gun with my 17 gallon home compressor to paint a car this weekend. While the compressor did struggle to keep up, the paint quality from the gun was very good! I was surprised at the level of quality I was able to get with very little adjustment from the gun. I purchased the kit with the 1.8, 1.4 and 1.2 tips. I used the 1.8 for the primer and the 1.4 for base coat and clear, and I am very happy with the results. I was a little skeptical about this gun when I ordered it, but would not hesitate to recommend it to others now.
    Great (Posted on 2/15/11)
    Review by Street sweeper
    Price
    Value
    Quality
    Spray's good I shot ppg through it and it came out amazing the only thing that I'd change is I would offer 1.3 tip cause the clear was kinda hard too lay perfect but over all it was great cleans up really good and is super easy too set up two test shots and that thing was laying SUPER flat!
    good gun for water based paints (Posted on 9/2/10)
    Review by Camshaft
    Value
    Quality
    Price
    I used this gun with auto air colors with very good results. Sprayed pearls and metalics with no problems. Used with urathane clear and 1.4 tip. By thinning clear helped. No orange peel just a few runs. Great gun.
    5 stars, with improvements (Posted on 9/2/10)
    Review by Zac
    Value
    Quality
    Price
    I was unhappy with gun until I got used to it. If you use other guns in the past like I have (an older Devilbiss HVLP), practice once on a practice panel before shooting your vehicle.

    In my opinion, I never realized how nice my 1000cc (33ish oz) cup was until I was unable to fit a full 32oz mix of paint. This left me stopping to refil my gun too often. They really need to offer a 1000cc cup. Just something to think about...

    Another thing, I don't think the 1.2 and 1.4mm tips were a wise selection. Possibly be alright to shoot waterborne, I never have so... I feel it'd be better if they offered a 1.3/1.5mm combo, at least for the PPG material I spray. Like I say, I think it's geared more towards waterborne paints. Take this with a grain of salt as I'm far from a pro though, this is my opinion from my first useage.

    All in all, it's a very nice gun for the money. Main selling point for me initially was the 4cfm consumption, as it barely stresses my medium sized compressor! Fit and finish is very nice, and many of the features are top notch. However, if I were to be browsing to buy another gun, I think I would go Devilbiss because of the 1000cc cup and 1.3/1.5/1.8mm needle selection.
    Great gun (Posted on 6/15/10)
    Review by Bill
    Value
    Quality
    Price
    i was very happy with the gun,very little adjustments ,i would highly recommend this gun
    3 1/2 stars (Posted on 1/25/10)
    Review by paul
    Quality
    Price
    Value
    More orange peel than I would like compared to other devibliss guns I have and use. May be better after more use.

    Items 11 to 18 of 18 total

    per page
    1. 1
    2. 2

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register