- Home
- Hotcoat Powder Single Stage Reflective Chrome
- Product Reviews
Details
Eastwood Single Stage Reflective Chrome Powder - Does not require a clear topcoat yet produces a durable, glossy, near-chrome appearance without tarnishing. Polyurethane formulation. Cure at 400ºF for 15 minutes after flow-out occurs. Finished gloss is between traditional Reflective Chrome Powder and Reflective Chrome with clear coat. For best results with translucent's, we recommend using our traditional Reflective Chrome Powder.
Hotcoat Powder Mirror BlackStarting at: $9.99 |
Hotcoat Powder High-Gloss BlackStarting at: $9.99 |
About Hotcoat Powder Single Stage Reflective Chrome
Eastwood Single Stage Reflective Chrome Powder - Does not require a clear topcoat yet produces a durable, glossy, near-chrome appearance without tarnishing. Polyurethane formulation. Cure at 400ºF for 15 minutes after flow-out occurs. Finished gloss is between traditional Reflective Chrome Powder and Reflective Chrome with clear coat. For best results with translucents, we recommend using our traditional Reflective Chrome Powder.
Customer Reviews
6 Item(s)
per page
-
smooth
(Posted on 2/24/11)
Review by steve -
works very well flows out great, pre-heat parts to 200f,,,,,, nice shineQuality Price Value -
WOW!
(Posted on 2/23/11)
Review by David -
I used this powder on a suspension spring and I'm blown away by the result! From a few feet away it's almost impossible to distinguish from a real chrome plated spring. Up close the appearance looks like chrome that simply needs a wipe.Quality Price Value
I also coated a valve cover with less spectacular results.in order for this powder to look good the object you're coating has to be PERFECTLY smooth. The valve cover has some rust pitting and it really shows.
This is a GREAT product! -
Worth a look
(Posted on 2/26/10)
Review by Steve -
Not a bad item; if you're expecting 'chrome', you'll be disappointed, as the finished part looks like polished aluminum with a slightly milky clearcoat over it. This will show any flaws in the part, so prep is important. The only real issue I had was on cast/forged iron/steel parts, as the color came out darker and I had 'mottling' on a few parts. Looks very good on steel sheetmetal. Lots cheaper than plating, so it's worth a look.Value Quality Price -
Great product
(Posted on 1/9/10)
Review by Bobby -
Great looking product.It is very simple to apply ,and good coverage. I am going to do alot of engine parts with this, Thanks .Price Value Quality
-
Single stage reflective Chrome
(Posted on 10/28/09)
Review by Frank -
I did a brand new SBF allum intake manifold. It looked great for a few weeks till I changed jets and the fuel melted the powder coat and turned it into a mess. This coating is not as resilient as they say. I stripped it all off after 1 year using Permatex gasket remover. Came very clean with to coats, no sanding needed at all. I'm going back to base coat clear coat automotive base paints as they hold up better and look really nice.Value Quality Price -
looks nice poor exterior
(Posted on 7/8/09)
Review by powder coat -
this goes on nice and looks awesome when cured, but fades in sunlight after a short period time(6months). Works great for interior partsPrice Value Quality
6 Item(s)
per page
Buy online or call 1-800-343-9353
 |
 |
 |
 |
 |
 |
 |
|