Eastwood Underhood Black Paint

    Item #10024 underhood black

    Details

    Underhood Black™ is the perfect lacquer paint for the correct OEM-matching finish under the hood...choose semi-gloss or matte Underhood Black™ Semi-Gloss is just the right 10-20 percent semi-gloss finish for most radiator supports, inner fender walls, underhood brackets, and other underhood parts. The Matte formula duplicates the near-zero gloss finish you find in many older cars for those parts. Both formulas resist chipping, scratches and light impacts.
    • This underhood paint has exceptional adhesion for an engine-compartment paint
    • Just degrease parts first for a factory-like finish
    • 11-oz. aerosol can covers 6 square feet; 1-quart can covers 48 square feet
    Customer Review: "I'm building a 1969 Yenko Camaro. I have the subframe and arms powder coated. I used Underhood Black on the engine bay and the underfloor. You cannot tell the difference between the powder coating and the Eastwood paint...amazing results! Looks factory-new now."

    About Eastwood Underhood Black Paint

    Underhood Black is the correct shade of black underhood spray paint for engine-compartment paint on radiator supports, inner fender walls, lug wrenches, jack bases, underhood brackets and other parts. Black underhood paints from typical hardware stores are either too thick, too glossy, or the wrong color.

    Just clean, degrease, and prepare the parts well (use our Self-Etching Primers), then apply this engine-compartment paint for a professional, factory-like, underhood paint finish. Acrylic lacquer withstands up to 250 degreesF and goes on thin for a smooth finish that doesn’t hide surface details. Do not use with enamel primers.

    Due to regulations pertaining to paint recycling, at this time we are unable to ship this product to Alberta, Canada.


    Accessories

    10041Z PRE Painting Prep
    16014Z Self-Etching Primer, Aerosol
    16009ZP Self-Etching Primer, Quart


    FAQs

    Q. How do I apply this underhood paint?
    A. Surface must be clean, dry, and free of dirt, grease and oil. For maximum protection, first prime with a self-etching primer or epoxy primer before top-coating. For best results, use when can is between 70 and 90 degrees F. This engine-compartment paint may be used over bare metal, self-etching primer, or Rust Encapsulator.


    Safety

    Use in a well-ventilated area or wear a respirator.


    MSDS Sheet

    Click Here for Material Safety Data Sheet


    Customers also viewed:

    Customer Reviews

    Items 51 to 59 of 59 total

    per page
    1. 1
    2. 2
    3. 3
    4. 4
    5. 5
    6. 6
    Excellent!! (Posted on 12/4/2010)
    Review by Mike
    Price
    Value
    Quality
    We use both the aerosol (small parts, water pump. etc) and the uart thru a spray gun (inner fenders) on my 1968 Firebird. Smooth finish, easy to apply, would recommend it to anyone for a quality restoration. Very pleased with the product!
    Great Paint (Posted on 9/3/2010)
    Review by cpd1212
    Value
    Quality
    Price
    This worked great under the hood of my 69 Fury. I used two different brands of paint under the hood for varying effects of gloss and I should have just used all Eastwood. Went on great and dried fast. The difference was amazing and really made the engine bay look great.
    Good finish, but doesn't cover well (Posted on 9/1/2010)
    Review by Tim
    Value
    Quality
    Price
    This paint leaves a nice final finish, but be aware that it doesn't cover well. It seems to have a low solids content, and requires lots of coats to black out a part. I recommend applying black primer first, before applying this paint.
    Good Stuff! (Posted on 7/3/2010)
    Review by lgjhn
    Value
    Quality
    Price
    I like the looks and texture of this paint and it appears tough as nails after it has had a chance to dry and age.
    underhood black (Posted on 4/17/2010)
    Review by the66catfrombuffalo
    Price
    Value
    Quality
    Goes on way better than expected
    The finish is what you want and need for that 60's 70's touch,factory type finish
    Well worth the extra bucks for this underhood product, if your gonna spend money, invest in this perfect product for concorse or just regular guy application
    Underhood and radaitor paint (Posted on 1/27/2010)
    Review by JB
    Price
    Value
    Quality
    Very good stuff, not too shiney or flat. I especially liked the rad. paint. This was real good.
    Great Product!! (Posted on 1/25/2010)
    Review by AndyGTO
    Quality
    Price
    Value
    During the restoration of my 68 Pontiac GTO We used this product all the time. It covers nicely and looks like it was professionally sprayed. I highly reccomend!!
    "Keep in the shop" (Posted on 1/25/2010)
    Review by TS
    Quality
    Price
    Value
    This is one of my favorite items. Always consistent in quality. A must have for any restorer!
    nice paint (Posted on 1/17/2010)
    Review by Michael
    Price
    Value
    Quality
    Just painted my fan and waterpump pulley and generator. Really came out nice. Excellent looking finish, would recomend it if you want a quality look.

    Items 51 to 59 of 59 total

    per page
    1. 1
    2. 2
    3. 3
    4. 4
    5. 5
    6. 6

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register