- Home
- Hotcoat Powder Appliance White
- Product Reviews
Details
HotCoat powders are optimized to promote static charge for uniform coverage and finish. All are UV and fuel resistant.
Curing:
Place part in oven preheated to 450 degrees F and turn down to 400 degrees F after powder flows out. Leave oven at 400 degrees F for an additional 20 minutes to complete the cure.
Packed in 8 oz. net weight cans. Coverage is equivalent to 2-3 aerosol cans (approximately 10-20 sq. ft.).
Curing:
Place part in oven preheated to 450 degrees F and turn down to 400 degrees F after powder flows out. Leave oven at 400 degrees F for an additional 20 minutes to complete the cure.
Packed in 8 oz. net weight cans. Coverage is equivalent to 2-3 aerosol cans (approximately 10-20 sq. ft.).
There are no upsell products available.
About Hotcoat Powder Appliance White
HotCoat powders are exclusively formulated for this system. They are optimized to promote static charge for uniform coverage and finish. All are UV and fuel resistant. Packed in 8 oz. net weight cans. Coverage is equivalent to 2-3 aerosol cans (approximately 10-20 sq. ft.).
One 8 oz net wt. can, enough powder to cover 10-20 sq.feet. This is a polyester powder.
Buy online or call 1-800-343-9353
 |
 |
 |
 |
 |
 |
 |
|