Hotcoat Powder Gray Primer
Item #10301 Hotcoat Powder Gray Primer
About Hotcoat Powder Gray Primer
Priming with Powder - The legendary durability of powder-coated finishes is further enhanced with this epoxy based powder primer. If the utmost corrosion resistance and adhesion are important to you, you'll want to use this primer under every opaque powder we sell. (Not for use under our new line of High Temp Powders, or directly under translucent finishes.) For best results apply to clean bare metal and place in a preheated 400 degree F oven until flow out occurs. DO NOT cure beyond flow out as adhesion will be adversely affected. Remove from oven, cool, apply powder of choice and bake as normal.
One 8 ounce bottle, enough to cover about 10 sq.ft.
Use PRE Painting Prep (10041Z) to remove residual grease or oil before powder application.
Allowing the Epoxy powder primer to fully cure will cause poor adhesion of the top coat. Some degree of adhesion can be restored to fully cured epoxy primer by sanding with 220 grit paper, however adhesion is always best when the top coat is applied over the partially cured primer surface.
Customers also viewed:
Includes dual-voltage powder-coat gun and infrared curing lamp systemOnly $529.99
Dual-Voltage HotCoat gun, 4 standard colors plus black and more$259.99
Includes Original HotCoat gun, 4 std. colors plus black and more$199.99
Enhance durability of powder-coated finishes with this epoxy-based primer
Starting at: $9.99
Medium silver wrinkle color look of abrasive-blasted steel
Starting at: $14.99
Good product, poor instructions
(Posted on 2/3/2014)
Review by Robert
Price Value Quality
Definately increases adhesion, OK filler
(Posted on 1/7/2010)
Review by mbramel
Value Quality Price