- Home
- Hotcoat Powder Gray Primer
- Product Reviews
Hotcoat Powder Gray Primer
Item #10301
| Quality | |
|---|---|
| Price | |
| Value |
50 lbs. Heavyweight- Special shipping charges apply.
Details
Priming with Powder - The legendary durability of powder-coated finishes is further enhanced with this epoxy based powder primer. If the utmost corrosion resistance and adhesion are important to you, you'll want to use this primer under every opaque powder we sell. (Not for use under our translucent finishes.) For best results apply to clean bare metal and place in a preheated 400-degreeF oven until flow out occurs. DO NOT cure beyond flow out as adhesion will be adversely affected. Remove from oven, cool, apply powder of choice and bake as normal.
About Hotcoat Powder Gray Primer
Priming with Powder - The legendary durability of powder-coated finishes is further enhanced with this epoxy based powder primer. If the utmost corrosion resistance and adhesion are important to you, you'll want to use this primer under every opaque powder we sell. (Not for use under our new line of High Temp Powders, or directly under translucent finishes.) For best results apply to clean bare metal and place in a preheated 400 degree F oven until flow out occurs. DO NOT cure beyond flow out as adhesion will be adversely affected. Remove from oven, cool, apply powder of choice and bake as normal.
One 8 ounce bottle, enough to cover about 10 sq.ft.
Use PRE Painting Prep (10041Z) to remove residual grease or oil before powder application.
Allowing the Epoxy powder primer to fully cure will cause poor adhesion of the top coat. Some degree of adhesion can be restored to fully cured epoxy primer by sanding with 220 grit paper, however adhesion is always best when the top coat is applied over the partially cured primer surface.
Customer Reviews
1 Item(s)
per page
-
Definately increases adhesion, OK filler
(Posted on 1/7/10)
Review by mbramel -
Based on my chip test (body hammer whacks) this does increase the adhesion pretty well. It sustained pretty much every solvent except for brake cleaner. It also works as a light filler, not like All Metal but enough to cover up the blast profile. Seems to work best when its just flowing out, then topcoat and fully cureValue Quality Price
1 Item(s)
per page
Buy online or call 1-800-343-9353
 |
 |
 |
 |
 |
 |
 |
|