Eastwood PRE Painting Prep

    Item #10041 Pre Painting Prep

    Now available in a Low VOC formula that can ship to CA. 11949Z

    Details

    The final step in surface paint preparation—Eastwood's PRE™ Paint Prep—just spray or wipe on, and wipe off!

    Proper surface preparation is one of the most important factors in helping you achieve a high-quality final finish. Our specially formulated PRE Paint Prep helps you prepare a surface for painting by removing dirt, wax, polish, grease, silicone, buffing compound, even road tar, ensuring a clean surface that's ready for final painting or powder-coating. Auto paint prep gets no easier!

    • Removes silicone, wax, polish, grease and dirt
    • Helps promote paint adhesion
    • Easy spray-on, wipe-off application
    • Available in aerosol, 30-oz., or gallon
    • Available in a Low-VOC formula for regulated areas

    About Eastwood PRE Painting Prep

    PRE Painting Prep is very easy to use: just spray it on and wipe it off. Works better than lacquer thinner, which can leave a thin residue on the surface that could interfere with paint adhesion.

    A "Low-VOC" PRE Painting Prep Formula, #11949Z, is available for shipment to California.


    Contents

    Choose from the following:
    10041Z is the 11-oz. aerosol
    11949Z is the "Low-VOC" 11-oz. aerosol
    10194ZP is the 30-oz. bottle
    21567ZP is the combination 30-oz. bottle and 11-oz. aerosol kit
    10594ZP is the 1-gallon can


    Application

    PRE Painting Prep is a blend of solvents that may damage plastic, so please test first.

    Works better than lacquer thinner that can leave a film behind, possibly compromising paint adhesion. Use to prepare surfaces for all Eastwood paints, including our exhaust manifold paints. On waxed areas, or surfaces that may have silicones, more than one application may be necessary. The 11-oz. aerosol can treats 10 sq. ft.


    Safety

    Use in a well-ventilated area, or wear a respirator.


    Customers also viewed:

    Customer Reviews

    Items 41 to 50 of 57 total

    per page
    1. 1
    2. 2
    3. 3
    4. 4
    5. 5
    6. 6
    Excellent product (Posted on 8/19/2012)
    Review by Chris
    Price
    Value
    Quality
    Little pricey, but worth the extra cash. Got rid of everything on my frame and ensured rust converter had a good surface to adhere to.
    Great Product! (Posted on 6/5/2012)
    Review by PokiHontas
    Value
    Quality
    Price
    Purchased a can to get my motorcycle ready for paint. It worked great. No issues with the paint or the plastic. I sprayed it on a rag and wiped down all my parts. One can was more then enough. Would definitely order again!!
    Be careful where you spray! (Posted on 5/16/2012)
    Review by slotef
    Price
    Value
    Quality
    This low voc version is acetone based, whereas the regular prep is Xylene based. I found this stuff will too easily lift fully-cured Eastwood self-etching primer. I am afraid to try it on other paints, so I just use it on bare metal. I wish I could still get regular Pre, but they won't sell it in California :(
    Worth it!!! (Posted on 1/1/2012)
    Review by Lance
    Quality
    Price
    Value
    This cuts through dirt and grease easy. I like to use it also for cleaning nasty grime off of wiring harnesses, wires and related connectors. Looks like new.
    Excellent cleaner / degreaser (Posted on 10/16/2011)
    Review by Jim
    Value
    Quality
    Price
    I use this aerosol cleaner to clean rattle can spray tips. Place the rattle can spray tip on the aerosol cleaner and press a few short blasts of cleaner through the tip. It also works great as a parts cleaner and degreaser.
    Great product (Posted on 4/13/2011)
    Review by lacey
    Value
    Quality
    Price
    I use it to pre treat and prep parts before I powder coat them , works great
    Good Stuff (Posted on 4/9/2011)
    Review by JoeBob
    Value
    Quality
    Price
    Great product just expensive if not on sale. Great for powder coating pre-cleaning.
    Pre painting aerosol (Posted on 1/11/2011)
    Review by Larry
    Price
    Value
    Quality
    Good quality product but way overpriced as are all of Eastwood's aerosol paint products.
    Great Stuff!!! (Posted on 11/10/2010)
    Review by SB Precision LLC
    Price
    Value
    Quality
    I use Eastwood Pre as a quick wipedown before I paint anything. It works better than standard chemicals like mineral spirits and acetone.
    Pre Painting Prep is great (Posted on 7/19/2010)
    Review by Ron
    Value
    Quality
    Price
    I've used Pre on several areas of my project now. It works great to remove the oil from new sheet metal stock before you start working it. It cleans your panels of all oils and dirt to ensure a clean painting surface. The aerosol cans are very handy and I just purchased the quart size for my spray bottle for larger areas.

    Items 41 to 50 of 57 total

    per page
    1. 1
    2. 2
    3. 3
    4. 4
    5. 5
    6. 6

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register