Eastwood PRE Painting Prep

    Item #10041 Pre Painting Prep

    Now available in a Low VOC formula that can ship to CA. 11949Z

    Details

    The final step in surface paint preparation—Eastwood's PRE™ Paint Prep—just spray or wipe on, and wipe off!

    Proper surface preparation is one of the most important factors in helping you achieve a high-quality final finish. Our specially formulated PRE Paint Prep helps you prepare a surface for painting by removing dirt, wax, polish, grease, silicone, buffing compound, even road tar, ensuring a clean surface that's ready for final painting or powder-coating. Auto paint prep gets no easier!

    • Removes silicone, wax, polish, grease and dirt
    • Helps promote paint adhesion
    • Easy spray-on, wipe-off application
    • Available in aerosol, 30-oz., or gallon
    • Available in a Low-VOC formula for regulated areas

    About Eastwood PRE Painting Prep

    PRE Painting Prep is very easy to use: just spray it on and wipe it off. Works better than lacquer thinner, which can leave a thin residue on the surface that could interfere with paint adhesion.

    A "Low-VOC" PRE Painting Prep Formula, #11949Z, is available for shipment to California.


    Contents

    Choose from the following:
    10041Z is the 11-oz. aerosol
    11949Z is the "Low-VOC" 11-oz. aerosol
    10194ZP is the 30-oz. bottle
    21567ZP is the combination 30-oz. bottle and 11-oz. aerosol kit
    10594ZP is the 1-gallon can


    Application

    PRE Painting Prep is a blend of solvents that may damage plastic, so please test first.

    Works better than lacquer thinner that can leave a film behind, possibly compromising paint adhesion. Use to prepare surfaces for all Eastwood paints, including our exhaust manifold paints. On waxed areas, or surfaces that may have silicones, more than one application may be necessary. The 11-oz. aerosol can treats 10 sq. ft.


    Safety

    Use in a well-ventilated area, or wear a respirator.


    Customers also viewed:

    Customer Reviews

    Items 31 to 40 of 57 total

    per page
    1. 1
    2. 2
    3. 3
    4. 4
    5. 5
    6. 6
    Positive (Posted on 3/21/2013)
    Review by Kurt
    Quality
    Price
    Value
    I thought I had cleaned the project until I used this product. I expected it to take a lot of the product but it didn't. Amazing how it cleans what I don't see. I recommend the use of this product if you want a quality finished product when done.
    Great product (Posted on 3/21/2013)
    Review by Sjdkm
    Quality
    Price
    Value
    This product works great. I use it on every piece before powder coating and have not had any issues with the finish product. Quick and easy to use drys quickly so you are ready to powder coat with in a few minutes.
    Use PRE before all of your painting! (Posted on 3/18/2013)
    Review by Mark
    Quality
    Price
    Value
    I bought a small amount of the PRE to see if I liked the product and how well it worked. Now I buy it by the gallon and use it before any painting. I use it after sand blasting or the solvent tank to remove all dust, grease, residue, etc. Then I use the compressor to blow all of the PRE out of any small areas so that the piece is totally dry. It is a bit pricey so definitely buy the gallon as it takes a fair bit to rinse a part. I would love to see it for cheaper but either way I highly recommend this for any painting prep.
    Great stuff (Posted on 3/14/2013)
    Review by doc
    Price
    Value
    Quality
    I have been using both the 30oz. and the aerosol PRE for the last few years. Since using these materials all of the contaminants that somehow manage to get into the project have been eliminated. Far fewer fish eyes and better adhesion of paint products to a super clean surface is what we all try to achieve in our restorations. PRE works!
    Repeat Customer...This Stuff Works!!! (Posted on 2/7/2013)
    Review by Mark
    Price
    Value
    Quality
    This is my first large purchase of Pre, but I've used plenty of it in aerosol & I have to say that it works very well as your final step before painting or finishing. I use it quite often to clean up any residue that's left over after polishing aluminum & it's never disappointed.

    I'd highly recommend this if you do a lot of painting, polishing, or any other refinishing jobs that require a properly-prepped surface to yield an end result that looks professional & one that lasts for years.
    Winner (Posted on 1/30/2013)
    Review by ARBtn
    Price
    Value
    Quality
    Great work,this does wonders for working with metal.I`ve used it and it makes my job alot easier.
    Winner (Posted on 1/30/2013)
    Review by ARBtn
    Price
    Value
    Quality
    Great work,this does wonders for working with metal.I`ve used it and it makes my job alot easier.
    This stuff rocks! (Posted on 10/7/2012)
    Review by Greg
    Quality
    Price
    Value
    Used this in liquid form on tons of chassis and engine parts, and then used this aerosol on headers this week. It's great! All results were awesome except fisheye on one of the small header supply tubes - wiped with lightly sprayed wrag after the first coat and viola! - perfect finish.
    Don't paint without it! (Posted on 10/6/2012)
    Review by syclone
    Quality
    Price
    Value
    I was having problems with "fish-eye" in the primer stage of my bike project. I purchased the Pre Painting Prep and the problem was gone. I use it now for the pre-painting stage and everything is going great. Thanks for another super product !
    Great Stuff (Posted on 8/19/2012)
    Review by Greg
    Price
    Value
    Quality
    This is one of those products that you want to have around your shop for a number of reasons... It not only cleans up paint messes, but cuts through the grime and gunk and makes prepping metal for paint a breeze.

    Items 31 to 40 of 57 total

    per page
    1. 1
    2. 2
    3. 3
    4. 4
    5. 5
    6. 6

    Write Your Own Review

    Only registered users can write reviews. Please, log in or register