Buff Motor 1 1/2 hp
- Extended 30" overall shaft length; 7/8" shafts
- 3600 rpm
- Use with 10"-dia. buffs (see "Accessories" tab)
- Can be wired for 110v AC or 220v AC
- 3-year mfr's. warranty
About Buff Motor 1 1/2 hp
Overall shaft length is 30" to give you plenty of room to buff larger pieces. Shaft extends 7-1/4" beyond the bell-shaped, cast aluminum, sealed motor housing. Single-phase motor.
ELECTRICAL NOTE: Cord and plug are NOT included. Motor can be wired for either 110v AC or 220v AC, but is shipped pre-wired for 110v AC. Requires 13.8 amps at 115v AC or 6.9 amps at 230v AC.
1-1/2-HP, 3600-rpm Baldor Motor with 7/8" shafts
Cord and plug are NOT included
13162 Tool Stand
13070 Buffing Cabinet with Shelves
13016 Buffing Kit (10")
13038 Spiral Buff
13062 Sisal Buff with 1/2” hole
13061 Sisal Buff with 3/4” hole
13046 Cotton Flannel Buff with 3/4” hole
13040 Loose-Section Buff with 1/2” hole
13041 Loose-Section Buff with 3/4” hole
WIRING REQUIRED: Cord and plug are NOT included. Motor can be wired for either 110v AC or 220v AC, but is shipped pre-wired for 110v AC. Requires 13.8 amps at 115v AC or 6.9 amps at 230v AC.
Wear appropriate ANSI-approved safety eye protection, ANSI-approved hearing protection, 14" or longer leather gloves, and ANSI-approved respiratory protection.
Customers also viewed:
1 each of 10"-dia. buffs: sisal, spiral, canton, loose; 3/4" holeOnly $34.99
Remove residual compound and metal from "loaded" buffing wheelsOnly $14.99
Tough, flexible, crystal clear barrier keeps metal looking brightOnly $12.99
Very Good Item!
(Posted on 3/26/12)
Review by Tim Jones
Price Value Quality